I always reuse the original plug caps. They have a 5~10Kohm resistor and screw on. At the coil end, use silicone seal to keep rain out.
--- On Sat, 4/11/09, Snookfever <[email protected]> wrote: From: Snookfever <[email protected]> Subject: [Nighthawk Lovers] Re: Ignition Wires...are they model specific or generic; and where do I get good ones? To: "Nighthawk Motorcycle Lovers!" <[email protected]> Date: Saturday, April 11, 2009, 1:32 AM I did exactly what Dennis is suggesting on my 84 700s (despite the local shop advising not to) and it was cheap and worked great. Went to a NAPPA store and bought good quality solid wire with staight boots. All I had to do is measure trim and screw into coils. Works great. On Apr 7, 3:28 pm, David Patterson <[email protected]> wrote: > Do I have to get wires made specifically for my '83 Nighthawk, or are they generic? > > Any suggestions? OEM, aftermarket, no brand, etc? --~--~---------~--~----~------------~-------~--~----~ You received this message because you are subscribed to the Google Groups "Nighthawk Motorcycle Lovers!" group. To post to this group, send email to [email protected] To unsubscribe from this group, send email to [email protected] For more options, visit this group at http://groups.google.com/group/nighthawk_lovers?hl=en -~----------~----~----~----~------~----~------~--~---
