You sound like u know more about o-rings than I do. I usually just take the old ones down to the autoparts store and try to match them.
On 5/20/09, oldschoolgwin <[email protected]> wrote: > > Does anyone know the OEM oring size for the center and two outside > fuel connectors for the carb rack on an 83 650? > > The original "cracked" orings measure ~ 0.070" in cross section. > > Best I can tell is the originals would have been metric with cross > section of 1.78mm > > Center: 1.78 x TBD (perhaps 8.0mm?) > > Outside: 1.78 x TBD (perhaps 6.0mm?) > > Or is there a non-metric equivalent? Best i can tell is nonmetric > cross section is 0.060" which will not provide enough oring > compression. > > Also should these be Viton or will Nitrile (NBR) be sufficient? > > Can anyone shed some light of what has worked? I'm having trouble > finding these any where. > > Tthanks, > > Paul > > > -- Sent from my mobile device -Kyle --~--~---------~--~----~------------~-------~--~----~ You received this message because you are subscribed to the Google Groups "Nighthawk Motorcycle Lovers!" group. To post to this group, send email to [email protected] To unsubscribe from this group, send email to [email protected] For more options, visit this group at http://groups.google.com/group/nighthawk_lovers?hl=en -~----------~----~----~----~------~----~------~--~---
