and that's what i did...thanks Dennis... i'll post the pics and update and results of the test tomorrow...
for now, i'm going to bed!...i'm tiirred. talk to y'all tomorrow!!!! -NghthwkLvr- On Jun 6, 11:36 pm, Dennis Hammerl <[email protected]> wrote: > I don't see any washers, just the bushing. I reuse all original washers to > maintain the clearances from the builder. I only clean the armature and > replace the brushes. Keep everything as it was. The washers are thrust > washers and serve to establish an end-play clearance. Dab of grease in the > bushing (very little) and reassemble. > > --- On Sat, 6/6/09, NghthawkLvr <[email protected]> wrote: > > From: NghthawkLvr <[email protected]> > Subject: [Nighthawk Lovers] any suggestions? .... > To: [email protected], [email protected] > Date: Saturday, June 6, 2009, 5:54 PM > > hey guys... > > any suggestions for removing this washer, and the similar larger one > in the other end...to replace them with the new ones in the rebuild > kit? > > what do y'all think... > > thanks again... > > NghthwkLvr > > 6JUNE09_STARTER PICS 003.jpg > 6JUNE09_STARTER PICS 004.jpg > > These pictures were sent with Picasa, from Google. > Try it out here:http://picasa.google.com/ --~--~---------~--~----~------------~-------~--~----~ You received this message because you are subscribed to the Google Groups "Nighthawk Motorcycle Lovers!" group. To post to this group, send email to [email protected] To unsubscribe from this group, send email to [email protected] For more options, visit this group at http://groups.google.com/group/nighthawk_lovers?hl=en -~----------~----~----~----~------~----~------~--~---
