So I have the common manual. It only says to refer to the bike
specific manual to set a certain number of turns for the pilot jet (2
5/8ths turns), actually it says to record the number of turns until it
is tight. So is that the only adjustment other than the float to be
made in the interior of the carb (when it's apart)? Everything else is
just gently tightened?

I am assuming that the common manual is correct for setting up the
carbs. I know installation and removal will be bike specific, but i
have found a great deal of info on that on-line.




On Oct 20, 12:59 pm, Kyle Munz <[email protected]> wrote:
> No, you back them off, I believe 2-5/8 turns. I'd definitely recommend
> getting ahold of a service manual before cracking into them.
>
> -Kyle
>
> On Tue, Oct 20, 2009 at 8:37 AM, Steve Pusser <[email protected]> wrote:
> > I'm getting a 83 550 tomorrow that has been sitting for 5 years. I know I
> > have to clean the carbs. My question is;
>
> > When putting the carbs back together, do you need to worry about setting
> > the jets back up to a certain spec, or do you just screw them all the way
> > back in?
--~--~---------~--~----~------------~-------~--~----~
You received this message because you are subscribed to the Google Groups 
"Nighthawk Motorcycle Lovers!" group.
To post to this group, send email to [email protected]
To unsubscribe from this group, send email to 
[email protected]
For more options, visit this group at 
http://groups.google.com/group/nighthawk_lovers?hl=en
-~----------~----~----~----~------~----~------~--~---

Reply via email to