You don't need a kit, you need parts. There are only two pistons and two seals 
on that if memory serves me.(is it  single piston brake ? In that case only one 
of each is needed) As long as the pistons aren't pitted, clean them and the 
caliper and replace the seals. Obtain parts from a Honda dealer. If the budget 
allows, replace the tubing too. Use non-OEM hose. Brake feel is improved with 
after-market racer tubing. 




________________________________
From: Chuck <[email protected]>
To: [email protected]
Sent: Tue, February 23, 2010 4:13:18 PM
Subject: [Nighthawk Lovers] Front Brake Caliper rebuild

 
I have a 1982 CB450SC Nighthawk that I recently 
purchased from a friend.  It was garaged for about 5-6 years with a starter 
problem, and I'm in the process of getting it running again.  When I 
removed the front brake caliper to change the pads and bleed the system, I 
was unable to get the caliper pistons to release.  I ended up having to use 
a vice to get them to budge at all.  I was thinking about rebuilding the 
caliper, but I seem to be unable to find any rebuild kits for this year.  
The local shop says the earliest one they see listed is for the '86 450.  
Is there a kit from another bike that might work for mine, or could I just 
reuse 
the old seals?  The brake fluid in the bike was pretty nasty, and I'm also 
rebuilding the master cylinder piston as well, so I imagine the whole system 
could use a good cleaning.
-- 
You received this message because you are subscribed to the Google Groups 
"Nighthawk Motorcycle Lovers!" group.
To post to this group, send email to [email protected].
To unsubscribe from this group, send email to 
[email protected].
For more options, visit this group at 
http://groups.google.com/group/nighthawk_lovers?hl=en.



      

-- 
You received this message because you are subscribed to the Google Groups 
"Nighthawk Motorcycle Lovers!" group.
To post to this group, send email to [email protected].
To unsubscribe from this group, send email to 
[email protected].
For more options, visit this group at 
http://groups.google.com/group/nighthawk_lovers?hl=en.

Reply via email to