They must come out. One of mine was as you described. There is no way to hold the other side but I was able to break mine loose with a couple of sharp hits on the allen wrench, much like an impact wrench
On Mon, May 3, 2010 at 10:23 PM, Graham Rogers <[email protected]> wrote: > Oh, and I did unscrew the allen bolt in the bottom. I haven't removed it > completely, it seems to just keep unscrewing forever and there's tension on > it. > > > On May 3, 2010, at 9:34 PM, Graham Rogers wrote: > > I'm replacing the front fork seals on an '85 700 S. No problem getting the >> forks off the bike and the caps off but cannot get the tube out from the >> slider. I've removed the clip on top of the seal, what am I missing? I >> don't remember having this trouble before, Graham >> >> -- >> You received this message because you are subscribed to the Google Groups >> "Nighthawk Motorcycle Lovers!" group. >> To post to this group, send email to [email protected]. >> To unsubscribe from this group, send email to >> [email protected]<nighthawk_lovers%[email protected]> >> . >> For more options, visit this group at >> http://groups.google.com/group/nighthawk_lovers?hl=en. >> >> >> > -- > You received this message because you are subscribed to the Google Groups > "Nighthawk Motorcycle Lovers!" group. > To post to this group, send email to [email protected]. > To unsubscribe from this group, send email to > [email protected]<nighthawk_lovers%[email protected]> > . > For more options, visit this group at > http://groups.google.com/group/nighthawk_lovers?hl=en. > > -- You received this message because you are subscribed to the Google Groups "Nighthawk Motorcycle Lovers!" group. To post to this group, send email to [email protected]. To unsubscribe from this group, send email to [email protected]. For more options, visit this group at http://groups.google.com/group/nighthawk_lovers?hl=en.
