If you don't get a response sooner, I can probably take a few pics tomorrow night. Dave Date: Tue, 11 May 2010 16:34:10 -0400 Subject: [Nighthawk Lovers] 83' CB550SC Choke Cable Path From: [email protected] To: [email protected]
Hey guys, I'm in a bit of bind here. When I bought my bike, the choke cable was cut off with about 6"-12" remaining, sticking out of the carbs. This was (and this is only a theory) probably because when the choke lever was broken off so he needed a fix and figured it was good enough. Fast forward: I finally found an OEM replacement locally and I started to get it put on this afternoon. I got the replacement lever installed, the new cable installed into the handlebar assembly, and then came attaching it to the carbs. Here's the problem: The repair manual I've got, while very extensive in it's repair guides and tips, makes the fatal mistake of assuming you have the old parts still with the bike. I, unfortunately, do not have the old cable so I have no idea what the path is that I should route the new cable. Could somebody find it in their heart to take a couple pictures of their cable path so I can have a rough idea of where they should go? I would really, really appreciate it! Thanks guys! Sean -- You received this message because you are subscribed to the Google Groups "Nighthawk Motorcycle Lovers!" group. To post to this group, send email to [email protected]. To unsubscribe from this group, send email to [email protected]. For more options, visit this group at http://groups.google.com/group/nighthawk_lovers?hl=en. -- You received this message because you are subscribed to the Google Groups "Nighthawk Motorcycle Lovers!" group. To post to this group, send email to [email protected]. To unsubscribe from this group, send email to [email protected]. For more options, visit this group at http://groups.google.com/group/nighthawk_lovers?hl=en.
