Nice call. The Choke was sticking open and put some WD40 and that Resolved the issue. Dave thanks for the info about the Idle set Screw. I will needing that info in the future.
Thanks again Bassam -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Kyle Munz Sent: Wednesday, July 07, 2010 8:07 AM To: [email protected] Subject: Re: [Nighthawk Lovers] Bike running very high RPM It also wouldn't hurt to watch the carbs as you work the choke up and down to make sure the enricheners are turning all the way closed. On 7/7/10, Bassam Khalil <[email protected]> wrote: > Thanks... I will try that tonight and let you know what happens. > > Thanks Again > > Bassam > > -----Original Message----- > From: [email protected] > [mailto:[email protected]] On Behalf Of David Cummings > Sent: Wednesday, July 07, 2010 7:57 AM > To: [email protected] > Subject: Re: [Nighthawk Lovers] Bike running very high RPM > > There is an idle set screw between the 2 & 3 carbs, when the bike is > warmed up, turn it until you get to somewhere between 1000 and > 1500rpm. > > -Dave > > On Wed, Jul 7, 2010 at 8:53 AM, Bassam Khalil <[email protected]> > wrote: >> I have one quick question. I have had the carbs cleaned and the tank clean >> and put in a new petcock. I started the Bike and it ran at 2000 to 2500 > RPM >> but after riding for 10 minutes or so it started idling at 4500RPM and was >> wondering how I would adjust the carbs? >> >> >> >> >> >> Thanks Again >> >> >> >> Bassam >> >> -- >> You received this message because you are subscribed to the Google Groups >> "Nighthawk Motorcycle Lovers!" group. >> To post to this group, send email to [email protected]. >> To unsubscribe from this group, send email to >> [email protected]. >> For more options, visit this group at >> http://groups.google.com/group/nighthawk_lovers?hl=en. >> > > -- > You received this message because you are subscribed to the Google Groups > "Nighthawk Motorcycle Lovers!" group. > To post to this group, send email to [email protected]. > To unsubscribe from this group, send email to > [email protected]. > For more options, visit this group at > http://groups.google.com/group/nighthawk_lovers?hl=en. > > -- > You received this message because you are subscribed to the Google Groups > "Nighthawk Motorcycle Lovers!" group. > To post to this group, send email to [email protected]. > To unsubscribe from this group, send email to > [email protected]. > For more options, visit this group at > http://groups.google.com/group/nighthawk_lovers?hl=en. > > -- Sent from my mobile device -Kyle -- You received this message because you are subscribed to the Google Groups "Nighthawk Motorcycle Lovers!" group. To post to this group, send email to [email protected]. To unsubscribe from this group, send email to [email protected]. For more options, visit this group at http://groups.google.com/group/nighthawk_lovers?hl=en. -- You received this message because you are subscribed to the Google Groups "Nighthawk Motorcycle Lovers!" group. To post to this group, send email to [email protected]. To unsubscribe from this group, send email to [email protected]. For more options, visit this group at http://groups.google.com/group/nighthawk_lovers?hl=en.
