thanx ill try it and let yall know

On Wed, Mar 23, 2011 at 11:22 AM, Robert Kariniemi <
[email protected]> wrote:

> Ted,
> clean connections well.  I have the same bike.  It runs pretty well now,
> but I put in new solenoid, and cleaned all connections to starter motor
> first.  Battery connected directly to starter shows it is good!  So now it
> is cabling or ignition. I basically had a completely dead system when i
> started, including no headlights, and this was with a new battery!  I had to
> wirebrush about 10 -20 terminals and put in brand new fuses as well.  The
> diagram in Clymers is the one I used to wire it up, and that worked!  I
> bought new ignition switch also.
> Robert
> ----------------------------------
>
>
> On Wed, Mar 23, 2011 at 8:35 AM, ted <[email protected]> wrote:
>
>> i am building my first bike it's an 82 cb450sc. i got it after it had
>> been sitting a while i have Clymer book for it this my be a silly
>> question but i got a starter selonoide for it as it was missing anyone
>> know the wireing order i have the diagram but someone changed the
>> wires all around and spliced a bunch of unneeded suff i wanna strip it
>> to bare esentals. also getting no power with jumpers hooked up and no
>> lights no N. light nothing i tested the starter out of the bike it
>> spins i also removed left side cover magneto will turn by hand
>>
>> --
>> You received this message because you are subscribed to the Google Groups
>> "Nighthawk Motorcycle Lovers!" group.
>> To post to this group, send email to [email protected].
>> To unsubscribe from this group, send email to
>> [email protected].
>> For more options, visit this group at
>> http://groups.google.com/group/nighthawk_lovers?hl=en.
>>
>>
>  --
> You received this message because you are subscribed to the Google Groups
> "Nighthawk Motorcycle Lovers!" group.
> To post to this group, send email to [email protected].
> To unsubscribe from this group, send email to
> [email protected].
> For more options, visit this group at
> http://groups.google.com/group/nighthawk_lovers?hl=en.
>

-- 
You received this message because you are subscribed to the Google Groups 
"Nighthawk Motorcycle Lovers!" group.
To post to this group, send email to [email protected].
To unsubscribe from this group, send email to 
[email protected].
For more options, visit this group at 
http://groups.google.com/group/nighthawk_lovers?hl=en.

Reply via email to