I made mine too, but it worked fine, but I made it a tight fit and used an impact gun. You might ask a local shop, sometimes they will rent you a special tool like that. The thing is they didn't have to use that special castle nut since the replacement is an actual hex nut. Sent via BlackBerry by AT&T
-----Original Message----- From: zgotts <[email protected]> Sender: [email protected] Date: Thu, 29 Dec 2011 17:59:21 To: Nighthawk Motorcycle Lovers!<[email protected]> Reply-To: [email protected] Subject: [Nighthawk Lovers] Clutch Spanner Wrench Anyone in the group have a clutch spanner wrench for a 91-03? I tried making one out of a 27mm socket and it isn't going so well... I think I need a factory one that engages all the way now that the notches are halfway boogered up. I'm almost to the point of using vise-grips... help! -- You received this message because you are subscribed to the Google Groups "Nighthawk Motorcycle Lovers!" group. To post to this group, send email to [email protected]. To unsubscribe from this group, send email to [email protected]. For more options, visit this group at http://groups.google.com/group/nighthawk_lovers?hl=en. -- You received this message because you are subscribed to the Google Groups "Nighthawk Motorcycle Lovers!" group. To post to this group, send email to [email protected]. To unsubscribe from this group, send email to [email protected]. For more options, visit this group at http://groups.google.com/group/nighthawk_lovers?hl=en.
