Just a couple questions: Does it "Start over" if you come to a stop and set out again? Does it improve if you downshift, or do you keep the low power condition?
Have you checked to make sure your tank vents are working properly, and your carbs aren't trying to literally suck fuel against a vacuum to deliver fuel to the bike? -Kurt On Sat, Apr 14, 2012 at 8:50 AM, Double G <[email protected]> wrote: > Hello, Newbie here, 450 Nighthawk CA. Model loses power in each gear > till in top gear on flat road w/ steady throttle rpm decrease > steadily. > I've checked for air leaks, tested coils, new caps, carb clean, will > re-check valves, new air cleaner, cleaned slide disk and cover, new > plugs. > Any ideas? > What is the factory setting on air screws? and what proceedure do you > like for setting these carbs up? any tricks? > Thanks in advance > Double G > > -- > You received this message because you are subscribed to the Google Groups > "Nighthawk Motorcycle Lovers!" group. > To post to this group, send email to [email protected]. > To unsubscribe from this group, send email to > [email protected]. > For more options, visit this group at > http://groups.google.com/group/nighthawk_lovers?hl=en. > > -- You received this message because you are subscribed to the Google Groups "Nighthawk Motorcycle Lovers!" group. To post to this group, send email to [email protected]. To unsubscribe from this group, send email to [email protected]. For more options, visit this group at http://groups.google.com/group/nighthawk_lovers?hl=en.
