That's exactly what happened with mine. In the holders it was opening and closing the circuit. Pulled it and put the meter on each end and it passed (because I was holding it together hy doing that) but touch the leads to the sides and it was open.
-Kyle On Aug 19, 2012 6:37 PM, "Cunning Linguist" <[email protected]> wrote: > Success. > > First of all, thank you all for all your help and advice. The quick > response from you guys was incredible. > > Turned out to be a fuse after all. Glass fuse. Visual inspection looked > good. Continuity test passed. Turned out to have fine break. Found it by > chasing voltage to fuse block. Glad I took the time instead of ordering a > bunch of parts. Still confused as to why 1 coil test according to spec and > the other doesn't though. Just glad my baby is back up. Gonna take a test > run and try her out. > > Thanks again, > > Shauncho > > On Sun, Aug 19, 2012 at 2:57 PM, Jason King <[email protected]> wrote: > >> the relay itself could be bad if you jump around it and sent power >> straight to the starter >> On Aug 19, 2012 5:45 PM, "Cunning Linguist" <[email protected]> >> wrote: >> >>> I don't either. the fuse is good. checked voltage across it. >>> >>> On Sun, Aug 19, 2012 at 2:35 PM, Kyle Munz <[email protected]> wrote: >>> >>>> I don't see how the coils could keep the starter motor from kicking in. >>>> There's also a fuse by the starter relay. I would also suspect a loose >>>> connection or dirty ground somewhere. >>>> >>>> -Kyle >>>> >>>> >>>> On Sun, Aug 19, 2012 at 4:00 PM, shauncho <[email protected]> wrote: >>>> >>>>> Ok. cant seem to find my original post but have received your >>>>> responses. >>>>> >>>>> Heres the update. >>>>> >>>>> Starter. Jumped relay and starter runs but bike wont start. >>>>> >>>>> Fuses. Checked all fuses on display and replaced 2 10 amp fuses that >>>>> just fell apart when I tried to remove th >>>>> >>>>> Coils. Checked secondary resistence (where plug wire screws onto >>>>> coil). Left coil checks out according to spec in manual. Right coil has >>>>> infinite resistence. Coil appears to be bad. >>>>> >>>>> Question. If 1 coil is bad could that keep power from engaging >>>>> starter relay? seems it shouldn't but I'm new to working on bikes. >>>>> >>>>> Pulse generator plug wires continuity checks out according to manual. >>>>> >>>>> I quess I will replace coil and go from there. >>>>> >>>>> Any more ideas, I'm all ears. >>>>> >>>>> Thanks all >>>>> >>>>> -- >>>>> You received this message because you are subscribed to the Google >>>>> Groups "Nighthawk Motorcycle Lovers!" group. >>>>> To view this discussion on the web visit >>>>> https://groups.google.com/d/msg/nighthawk_lovers/-/eR8xygCAxi8J. >>>>> To post to this group, send email to [email protected] >>>>> . >>>>> To unsubscribe from this group, send email to >>>>> [email protected]. >>>>> For more options, visit this group at >>>>> http://groups.google.com/group/nighthawk_lovers?hl=en. >>>>> >>>> >>>> -- >>>> You received this message because you are subscribed to the Google >>>> Groups "Nighthawk Motorcycle Lovers!" group. >>>> To post to this group, send email to [email protected]. >>>> To unsubscribe from this group, send email to >>>> [email protected]. >>>> For more options, visit this group at >>>> http://groups.google.com/group/nighthawk_lovers?hl=en. >>>> >>> >>> -- >>> You received this message because you are subscribed to the Google >>> Groups "Nighthawk Motorcycle Lovers!" group. >>> To post to this group, send email to [email protected]. >>> To unsubscribe from this group, send email to >>> [email protected]. >>> For more options, visit this group at >>> http://groups.google.com/group/nighthawk_lovers?hl=en. >>> >> -- >> You received this message because you are subscribed to the Google Groups >> "Nighthawk Motorcycle Lovers!" group. >> To post to this group, send email to [email protected]. >> To unsubscribe from this group, send email to >> [email protected]. >> For more options, visit this group at >> http://groups.google.com/group/nighthawk_lovers?hl=en. >> > > -- > You received this message because you are subscribed to the Google Groups > "Nighthawk Motorcycle Lovers!" group. > To post to this group, send email to [email protected]. > To unsubscribe from this group, send email to > [email protected]. > For more options, visit this group at > http://groups.google.com/group/nighthawk_lovers?hl=en. > -- You received this message because you are subscribed to the Google Groups "Nighthawk Motorcycle Lovers!" group. To post to this group, send email to [email protected]. To unsubscribe from this group, send email to [email protected]. For more options, visit this group at http://groups.google.com/group/nighthawk_lovers?hl=en.
