Will try Graham... we were able to adjust the idle though. Seems to be running fine now. Javier.
On Sun, Sep 22, 2013 at 8:28 PM, Graham Rogers <[email protected]>wrote: > Javier, I find a way of blasting it through bent straws. How about > carefully laying the bike almost on it's left hand side and then spraying > PB Blaster through the red straw bent to get as close to the screw part of > the screw. That's how I did it once. > > On Sep 22, 2013, at 7:27 PM, paul annen wrote: > > Kroil works best for that.... Spray.tube to soak it down, then let it sit > over night... Should come off easy in the am > On Sep 22, 2013 5:02 PM, "Allen Thomas" <[email protected]> wrote: > >> ** >> If you oil it and work it back and forth you can probably loosen it up. >> Sent via BlackBerry by AT&T >> ------------------------------ >> *From: * Javier Garcia <[email protected]> >> *Sender: * [email protected] >> *Date: *Sun, 22 Sep 2013 16:48:44 -0400 >> *To: *nighthawk_lovers<[email protected]> >> *ReplyTo: * [email protected] >> *Subject: *Re: [Nighthawk Lovers] Idle scew >> >> Tapping it with a screw driver worked, but is still impossible to move >> with the hand. Idle is better but it will need to take the carbs off >> eventually to fix this. >> On Sep 22, 2013 4:36 PM, "Allen Thomas" <[email protected]> wrote: >> >>> ** >>> PB Blaster it. I would think it is just a threaded rod that goes though >>> a bracket. >>> Sent via BlackBerry by AT&T >>> ------------------------------ >>> *From: * Javier Garcia <[email protected]> >>> *Sender: * [email protected] >>> *Date: *Sun, 22 Sep 2013 14:04:47 -0400 >>> *To: *nighthawk_lovers<[email protected]> >>> *ReplyTo: * [email protected] >>> *Subject: *[Nighthawk Lovers] Idle scew >>> >>> Is the idle screw on a NH 700s supposed to be very difficult to move? I >>> am trying to adjust the idle and I can't seem to move it with my hand. >>> There is no much space there, and I think it might be stuck. Are there any >>> tricks to deal with this? >>> >>> Javier. >>> >>> -- >>> You received this message because you are subscribed to the Google >>> Groups "Nighthawk Motorcycle Lovers!" group. >>> To unsubscribe from this group and stop receiving emails from it, send >>> an email to [email protected]. >>> To post to this group, send email to [email protected]. >>> Visit this group at http://groups.google.com/group/nighthawk_lovers. >>> For more options, visit https://groups.google.com/groups/opt_out. >>> >>> -- >>> You received this message because you are subscribed to the Google >>> Groups "Nighthawk Motorcycle Lovers!" group. >>> To unsubscribe from this group and stop receiving emails from it, send >>> an email to [email protected]. >>> To post to this group, send email to [email protected]. >>> Visit this group at http://groups.google.com/group/nighthawk_lovers. >>> For more options, visit https://groups.google.com/groups/opt_out. >>> >> >> -- >> You received this message because you are subscribed to the Google Groups >> "Nighthawk Motorcycle Lovers!" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to [email protected]. >> To post to this group, send email to [email protected]. >> Visit this group at http://groups.google.com/group/nighthawk_lovers. >> For more options, visit https://groups.google.com/groups/opt_out. >> >> -- >> You received this message because you are subscribed to the Google Groups >> "Nighthawk Motorcycle Lovers!" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to [email protected]. >> To post to this group, send email to [email protected]. >> Visit this group at http://groups.google.com/group/nighthawk_lovers. >> For more options, visit https://groups.google.com/groups/opt_out. >> > > -- > You received this message because you are subscribed to the Google Groups > "Nighthawk Motorcycle Lovers!" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > To post to this group, send email to [email protected]. > Visit this group at http://groups.google.com/group/nighthawk_lovers. > For more options, visit https://groups.google.com/groups/opt_out. > > > -- > You received this message because you are subscribed to the Google Groups > "Nighthawk Motorcycle Lovers!" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > To post to this group, send email to [email protected]. > Visit this group at http://groups.google.com/group/nighthawk_lovers. > For more options, visit https://groups.google.com/groups/opt_out. > -- You received this message because you are subscribed to the Google Groups "Nighthawk Motorcycle Lovers!" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send email to [email protected]. Visit this group at http://groups.google.com/group/nighthawk_lovers. For more options, visit https://groups.google.com/groups/opt_out.
