Nope. If yours has a drain bolt you can change the fluid with them in the bike. Inspection requires removal and disassembly. Sent via BlackBerry by AT&T
-----Original Message----- From: Tim Barber <[email protected]> Sender: [email protected] Date: Wed, 25 Sep 2013 20:01:06 To: nighthawk_lovers@googlegroups<[email protected]> Reply-To: [email protected] Subject: [Nighthawk Lovers] front forks on my '98 CB750 are very harsh and noisy. Group members: The front forks on my '98 CB750 are very harsh and noisy. I wanted to check the level & condition of the fork oil. Is is possible to do this without removing and dismantling the fork tubes? The factory manual says nothing about this. Tim -- You received this message because you are subscribed to the Google Groups "Nighthawk Motorcycle Lovers!" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send email to [email protected]. Visit this group at http://groups.google.com/group/nighthawk_lovers. For more options, visit https://groups.google.com/groups/opt_out. -- You received this message because you are subscribed to the Google Groups "Nighthawk Motorcycle Lovers!" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send email to [email protected]. Visit this group at http://groups.google.com/group/nighthawk_lovers. For more options, visit https://groups.google.com/groups/opt_out.
