Certainly swing arm bearings are commonly forgotten from the usual maintenance. Good point Allen. On Apr 18, 2014 5:32 PM, "Allen Thomas" <[email protected]> wrote:
> The GS I have has always felt a little squiggly in the rear end, riding > down the road it seemed to wander from side to side just slightly. I always > figured it was just because it is an old bike with a small tube swingarm. > But over the last week it got down right scary, when I used the rear brake > it felt like the aft shifted a couple of inches to the right, and when I'd > get back on the gas it would quickly snap to the left. Well I replaced the > swingarm pivot bearings today, and they were definitely shot. There was NO > grease left in them just some hardened muck that used to be grease, and a > bunch of rust. I decided to replace the coils while I was at it so I won't > know how much better it feels until I get some new plug wires. So my take > away from this is that on a 30 year old bike you should at minimum pull the > swingarm and grease it up. > > -- > You received this message because you are subscribed to the Google Groups > "Nighthawk Motorcycle Lovers!" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > To post to this group, send email to [email protected]. > Visit this group at http://groups.google.com/group/nighthawk_lovers. > For more options, visit https://groups.google.com/d/optout. > -- You received this message because you are subscribed to the Google Groups "Nighthawk Motorcycle Lovers!" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send email to [email protected]. Visit this group at http://groups.google.com/group/nighthawk_lovers. For more options, visit https://groups.google.com/d/optout.
