Hi Gang, I'm preparing to change the fork seals on the 650 & I don't have the right socket. They call it a fork bolt, it seems more like a screw in cap to me.(refer to picture) 25mm was too small. I thought I'd go big & bought a 28mm. It's too big. So is it 26 or 27? I must've used a friends standard size socket when I did them on the 550 many years ago. Luckily Autozone is only down the street. I also recall using a piece of PVC pipe as a special tool to tap in the new seals. I'm thinking it was 1 1/4"? If there's a another device to use or other suggestions I'd appreciate the tips.
Thanks-Bernie -- You received this message because you are subscribed to the Google Groups "Nighthawk Motorcycle Lovers!" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send email to [email protected]. Visit this group at http://groups.google.com/group/nighthawk_lovers. For more options, visit https://groups.google.com/d/optout.
