I have seen seals put in backwards that hold for a while The flat side should go out
From: [email protected] [mailto:[email protected]] On Behalf Of geo-hawk allan Sent: Friday, July 29, 2016 7:16 PM To: Nighthawk Motorcycle Lovers! Subject: [Nighthawk Lovers] '86 Nighthawk 700s Hi All, Earlier in the spring dad & I changed the outer shift-shaft seal as it was leaking pretty badly! Been fine all the way up to a few weeks ago, is leaking as bad now if not worse than it was before we replaced the seal?!?!? Am totally stumped as to why it would all of a sudden begin leaking everywhere again? Also, wondering are there 2 seals on the shift shaft? One inner and the one outer? Best I can tell by the limited images in the service manual and the parts lists pictures, it seems there is also another seal on the inner side of the casing? If so, that one seems to require the whole damned engine needing to be lifted out of the frame in order to get the case cover off to replace that seal.....ughhhhh.....Help?!? Any greatly appreciated... geo-hawk -- You received this message because you are subscribed to the Google Groups "Nighthawk Motorcycle Lovers!" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]<mailto:[email protected]>. To post to this group, send email to [email protected]<mailto:[email protected]>. Visit this group at https://groups.google.com/group/nighthawk_lovers. For more options, visit https://groups.google.com/d/optout. ________________________________ THIS MESSAGE IS INTENDED ONLY FOR THE USE OF THE INDIVIDUAL OR ENTITY TO WHICH IT IS ADDRESSED AND MAY CONTAIN INFORMATION THAT IS PRIVILEGED, CONFIDENTIAL, AND EXEMPT FROM DISCLOSURE UNDER APPLICABLE LAWS. If the reader of this message is not the intended recipient, or the employee or agent responsible for delivering the message to the intended recipient, you are hereby notified that any dissemination, distribution, forwarding, or copying of this communication is strictly prohibited. If you have received this communication in error, please notify the sender immediately by e-mail or telephone, and delete the original message immediately. Thank you. -- You received this message because you are subscribed to the Google Groups "Nighthawk Motorcycle Lovers!" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send email to [email protected]. Visit this group at https://groups.google.com/group/nighthawk_lovers. For more options, visit https://groups.google.com/d/optout.
