When you cleaned them you should have found a brass screw with A spring on each carb . that will be your mixture screw
From: [email protected] [mailto:[email protected]] On Behalf Of Tyler Garman Sent: Thursday, June 01, 2017 11:43 AM To: Nighthawk Motorcycle Lovers! <[email protected]> Subject: [Nighthawk Lovers] 1985 CB650 Idle Mixture screws? I took off all 4 carbs and cleaned them all up thoroughly, changed the oil and filter, air filter, and put it all back together. The bike starts great and idles right around 1100rpm. Initially i tried to give it some gas and it sputtered and died. started again and let it warm up for a few minutes with the choke all the way off. I was able to give it some gas and got a good response, but still get a slight stutter when I initially roll on the throttle. I'd like to adjust the idle mixture on the carbs as to me this indicates it is running a bit lean. I've done some research and looked all over the carbs and have not found anything that obviously looks like a screw to adjust the mixture. Does anyone know if/where on my '85 650 where I might find adjustments for the idle mixture?\ thanks for your time! -- You received this message because you are subscribed to the Google Groups "Nighthawk Motorcycle Lovers!" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]<mailto:[email protected]>. To post to this group, send email to [email protected]<mailto:[email protected]>. Visit this group at https://groups.google.com/group/nighthawk_lovers. For more options, visit https://groups.google.com/d/optout. ________________________________ THIS MESSAGE IS INTENDED ONLY FOR THE USE OF THE INDIVIDUAL OR ENTITY TO WHICH IT IS ADDRESSED AND MAY CONTAIN INFORMATION THAT IS PRIVILEGED, CONFIDENTIAL, AND EXEMPT FROM DISCLOSURE UNDER APPLICABLE LAWS. If the reader of this message is not the intended recipient, or the employee or agent responsible for delivering the message to the intended recipient, you are hereby notified that any dissemination, distribution, forwarding, or copying of this communication is strictly prohibited. If you have received this communication in error, please notify the sender immediately by e-mail or telephone, and delete the original message immediately. Thank you. -- You received this message because you are subscribed to the Google Groups "Nighthawk Motorcycle Lovers!" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send email to [email protected]. Visit this group at https://groups.google.com/group/nighthawk_lovers. For more options, visit https://groups.google.com/d/optout.
