Hello, 
This is my first time on here, and I am very new to doing motorcycle 
maintenance, repair, etc myself. I'm not a mechanic but I'm a quick study. 

I have an '84 650 that was a salvage and has not been treated very well over 
the years. The shop I got it from did some basic repair and triage, and the 
bike runs fine... 

The wiring is a total mess, the battery is not the appropriate size for the 
bike and several components are disconnected (turn signals, horn). When I tried 
to hook up a new battery, it was arcing so badly that I almost welded my 
fingers to the bike. I discovered that someone had shorted the 30a fuse to 
prevent it blowing... Smh. 

I am now going to redo all the electrical and I am pretty overwhelmed with the 
project. I found a great colored wiring diagram from this forum, and I have 
disassembled the bike to expose the wiring. 

My question is: is there somewhere I can get a wiring kit, that contains all 
the wires, fuses, relays, etc needed for this bike? I can read the diagram, but 
I am not familiar with "how it's supposed to be" so it's a difficult task. 

Are there any tips or strategies helpful in this project? Is there a list of 
items like fuses, relays, etc that I can refer to, or is the wiring diagram the 
best bet? 

Thanks in advance for any and all advice! 

Cheers, 
Stefan 

-- 
You received this message because you are subscribed to the Google Groups 
"Nighthawk Motorcycle Lovers!" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to [email protected].
To post to this group, send email to [email protected].
Visit this group at https://groups.google.com/group/nighthawk_lovers.
For more options, visit https://groups.google.com/d/optout.

Reply via email to