The two breather tubes go down either side of the frame tubing . They go up
before going down just to form a gentler sweep. No gas should come out. If
it does you have a leaking float valve or leaking O rings in the metal fuel
feed to each carb. Tap the bowls with a screw driver first to see if it
might be a sticking float. Sometimes draining the bowls and refilling can
work.



On Wed, Apr 18, 2018 at 2:33 PM <[email protected]> wrote:

>
> My understanding is that the 2 tubes on the right and left side of the
> carbs are breathers. But for the life of me i cant figure out where they
> are supposed to connect to. The a stretched on both ends so they look like
> they were connected to something.once the carbs were installed i snaked
> them in a down ward position and fuel came out of the right one. When I
> pointed them up this didn't occur. Anyone have any experience with this or
> insight. !984 CB650sc by the way. And she started for the first time today
> after I replaced the engine.
>
>
> <https://lh3.googleusercontent.com/-o8dOr_dKeqM/WtauLu-YhiI/AAAAAAAAAhk/WtwdS0Ikru4nOk9-QtLjmC0xPcIHDM4VACLcBGAs/s1600/IMG_5157.JPG>
>
>
> Video of first start..... <https://youtu.be/yZ38UopppFQ>
>
>
> --
> You received this message because you are subscribed to the Google Groups
> "Nighthawk Motorcycle Lovers!" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to [email protected].
> To post to this group, send email to [email protected].
> Visit this group at https://groups.google.com/group/nighthawk_lovers.
> For more options, visit https://groups.google.com/d/optout.
>

-- 
You received this message because you are subscribed to the Google Groups 
"Nighthawk Motorcycle Lovers!" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to [email protected].
To post to this group, send email to [email protected].
Visit this group at https://groups.google.com/group/nighthawk_lovers.
For more options, visit https://groups.google.com/d/optout.

Reply via email to