Hey Corey, I just redid the brakes on my 84 Cb650sc and had the same problem. If you have an air compressor, shoot some air down the hose until you hear the calipers on both sides pop out. Then fill the res. Put a little hose off the LEFT (furthest from master) bleeder into a jar half full of water. Pump 15 or 20 times, hold the last pump down, open and shut the bleeder. You should start seeing bubbles in the jar almost immediately. Repeat the pump, hold, open , shut process until you see just brake fluid coming out, no bubbles. Then switch to the right and do that side the same way. This was the first time I had bled hydraulic brakes on a bike and popping those calipers seemed to make all the difference. Good luck man
-- You received this message because you are subscribed to the Google Groups "Nighthawk Motorcycle Lovers!" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send email to [email protected]. Visit this group at https://groups.google.com/group/nighthawk_lovers. For more options, visit https://groups.google.com/d/optout.
