Hey friends! So I have cleaned everything, installed them on the bike. All seem to be working (even thought #3 header pipe is not as hot as the others - measured it with the thermometer). Now on to syncing - and a quick question about that. I presume when inserting the brass adapters/extensions into the intake tubes, for the number 3 intake, the vacuum tube needs to be disconnected first? Or is there another place on there? Not sure if the way I worded my question makes sense but I hope it does. Will snap a few pics to illustrate later on. Thanks all.
Sent from my iPhone > On Jan 29, 2019, at 2:50 PM, Arthur Sheller <[email protected]> wrote: > > If you plan on doing this great, blow out every hole you can find after > cleaning and make sure the floats are at 18.5 mm. Good luck!! > >> On Tue, Jan 29, 2019, 1:16 PM Jenya Spektor <[email protected] wrote: >> Hey - so i got the carbs off (actually I took off the rubber boots from the >> air filter box) and the rest was super easy. >> Here is the state of the carbs as they are - i have not cleaned anything yet >> - seems very clean. >> The rubber gaskets are a gonner thought - all plasticky and tough. I have >> changed the O-rings and the gaskets on the bowls. >> Keeping my fingers crossed as I am putting it back together. >> Let me know (looking at the pics) if there still a need to soak anything in >> the carb cleaner. >> Thanks to all - I'll keep you posted on the progress. >> Jenya >> <IMG_1674.JPG> >> <IMG_1673.JPG> >> <IMG_1672.JPG> >> -- >> You received this message because you are subscribed to the Google Groups >> "Nighthawk Motorcycle Lovers!" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to [email protected]. >> To post to this group, send email to [email protected]. >> Visit this group at https://groups.google.com/group/nighthawk_lovers. >> For more options, visit https://groups.google.com/d/optout. > > -- > You received this message because you are subscribed to the Google Groups > "Nighthawk Motorcycle Lovers!" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > To post to this group, send email to [email protected]. > Visit this group at https://groups.google.com/group/nighthawk_lovers. > For more options, visit https://groups.google.com/d/optout. -- You received this message because you are subscribed to the Google Groups "Nighthawk Motorcycle Lovers!" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send email to [email protected]. Visit this group at https://groups.google.com/group/nighthawk_lovers. For more options, visit https://groups.google.com/d/optout.
