I agree, I also had the same issue. I also pulled it out with a needle nose. I measured the length of the plastic screen since it had perished, and found a replacement for like 15 bucks online that worked. I will look for the part number and see if I can get it to you. Mine was for a 1983 CB650SC
Dougjones On Friday, December 27, 2019 at 7:07:55 PM UTC-5, Lar wrote: > > 83 nighthawk 650 I need to take everything off the fuel tank to get it > rust treated inside. I unscrewed the petcock assembly but the plastic tube > going into the tank with a screen will not move. Any thoughts on how it > comes out. I don't want to break anything and be stuck for parts I'll > never find. Thanks > -- You received this message because you are subscribed to the Google Groups "Nighthawk Motorcycle Lovers!" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/nighthawk_lovers/cb412474-04aa-48d6-b60c-2d0752a7bc74%40googlegroups.com.
