How long did you let it run for? It can take a while for them to all warm up. Did you sync the carbs after cleaning them?
-Kyle On Tue, Feb 25, 2020 at 1:42 PM '[email protected]' via Nighthawk Motorcycle Lovers! <[email protected]> wrote: > 1996 750 NH. > I’ve just put the carbs back on after completely stripping and cleaning > them, new O rings ( there was a leak ). Cleaned with carb cleaner and blown > out with compressed air. > Started the bike and after a couple of minutes it was idling nicely, but > the number 1 header was cold. Thinking it could be the plug, I pulled the > plug cap and the engine stalled. Put the cap back on and it was fine. > I was quite meticulous with the carb cleaning, so I’m hoping that the jets > and passageways are completely clean. > > -- > You received this message because you are subscribed to the Google Groups > "Nighthawk Motorcycle Lovers!" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > To view this discussion on the web visit > https://groups.google.com/d/msgid/nighthawk_lovers/47c92b10-bcd7-47a8-be5b-ed1af80b9da1%40googlegroups.com > . > -- You received this message because you are subscribed to the Google Groups "Nighthawk Motorcycle Lovers!" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/nighthawk_lovers/CAJARLXXLkdJ_KYmTn9MXbHBOLL4Zbdw_29zqK81WzQ_TpX-SMw%40mail.gmail.com.
