That looks pretty good for a DIY setup. -Kyle
On Wed, Jun 10, 2020 at 12:21 PM Gilles H <[email protected]> wrote: > Hi, > > Just sharing the setup I use, I am not providing web shortcuts as they > eventually do not work anymore. > > Youtube has good carb synch tutorials. > > Material: > > -10 ft 5mm ID fish tank tubing. > -4 valve fish tank air supply manifold. > -3 hexagon head screws 5mm X 0.8 pitch X 15mm long > -one vacuum gauge with 5mm or 3/16 barb fitting > -one 60cc syringe for fuel supply. > > The hex screws need to be drilled through 3/32 dia. > The head rounded to 5mm dia. > > The manifold makes it easy to check each cyl individually. > Keep all valves closed to begin. > Open slowly no. 2 first, note vacuum value, close valve. > Check the three others one at a time. > > Move the fuel tube to the right side of the frame and insert syringe. It > will empty quite slowly. > > Reminder - watch youtube tutorials, it will answer any question you might > have. > > > > > -- > You received this message because you are subscribed to the Google Groups > "Nighthawk Motorcycle Lovers!" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > To view this discussion on the web visit > https://groups.google.com/d/msgid/nighthawk_lovers/b3e6225a-0472-4c36-914c-b0cbf8df6e6do%40googlegroups.com > <https://groups.google.com/d/msgid/nighthawk_lovers/b3e6225a-0472-4c36-914c-b0cbf8df6e6do%40googlegroups.com?utm_medium=email&utm_source=footer> > . > -- You received this message because you are subscribed to the Google Groups "Nighthawk Motorcycle Lovers!" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/nighthawk_lovers/CAJARLXV2WVY0hAaJMcf4GSusZDwaBNrgpSFcDqCXj5x5rf3xyg%40mail.gmail.com.
