Thanks Steve, I will check that before replacing anything. Appreciate the info.
Rob S Sent from my iPhone > On Jun 16, 2020, at 8:52 AM, 'Steve Hart' via Nighthawk Motorcycle Lovers! > <[email protected]> wrote: > > > Hi Rob. > > Check to see if the drive on the front hub is broken, If you remove the > speedo cable at the front wheel you and look into where it came from you > should see a metal tab that the end of the speedo cable locates on to. When I > had speedo trouble this little metal tab had broken so the speedo cable was > not being driven around. If this is the case you will need to replace the > drive unit itself. > > I hope this helps. > > Steve H > > > >> On Tuesday, 16 June 2020 14:22:25 UTC+1, Robert Spraker wrote: >> I am restoring my 1983 650 SC and the speedometer is not working. Is there >> a common issue with these models? I am hoping to change out the cable to >> fix the problem, but thought I would ask if this is common and maybe there >> is an easy fix, or will I need to replace the wild 80's dash? I have not >> been able to locate a new one in good condition so I appreciate any advice >> anyone may have. >> >> Thanks >> >> Rob S >> >> >> >> > > -- > You received this message because you are subscribed to the Google Groups > "Nighthawk Motorcycle Lovers!" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > To view this discussion on the web visit > https://groups.google.com/d/msgid/nighthawk_lovers/8f147834-221b-4a2d-9f1f-b75117926ca0o%40googlegroups.com. -- You received this message because you are subscribed to the Google Groups "Nighthawk Motorcycle Lovers!" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/nighthawk_lovers/22792005-2E89-4199-A748-9AAE27E3C1FA%40gmail.com.
