Yep, they just screw onto the coils. You can order new resistor caps from NGK (SD05F) and some 7mm copper core ignition cable and make your own cables or even find spark plug wire sets on eBay now. I took pics when I made mine: https://nighthawk.kylemunz.com/633/sparkplug-wires/
-Kyle On Wed, Dec 8, 2021 at 1:38 AM Peter N <pnis...@gmail.com> wrote: > https://youtu.be/Z7LTvoMjkys?t=22 > > Ok, I think I figured it out. This video helped a lot. So in the coil > there's a screw, and the wire threads onto that screw. That's the part that > had me confused. I will look in the manual for wire resistance. Thanks for > the help. > > On Wednesday, December 8, 2021 at 2:25:43 AM UTC-5 Peter N wrote: > >> I've never made spark plug wires myself so forgive my ignorance, but do I >> just shove the wire into the coil and screw the cap on? There's no special >> type of wire end that's used for these coils? I was looking at the wire and >> it has a hole in it.. That's just created by the coil then? >> >> On Wednesday, December 8, 2021 at 2:08:14 AM UTC-5 wrench...@gmail.com >> wrote: >> >>> Yep, those are standard plug wires. You do need to figure out the >>> resistance above and below that connector, it may have a resistor inside, >>> but once you figure that out, you just replace that wire. >>> >>> You can buy all four and replace all of them or just the one. >>> Research the year and model and the plug wire's resistance rating. >>> >>> >>> On Wed, Dec 8, 2021 at 1:39 PM Peter N <pni...@gmail.com> wrote: >>> >>>> [image: 2021-12-08 00_28_42-IMG_20211208_001119.jpg - Photos.png][image: >>>> 2021-12-08 00_29_03-IMG_20211208_001058.jpg - Photos.png]So I was >>>> taking everything off to do the valve cover gasket and drain the tank and >>>> one of the wires broke off. The previous owner had electrical tape wrapped >>>> around it so I assume it was already broken. What are my options? I would >>>> like to replace all four wires. Are there kits that come with the ends that >>>> plug into the coils directly? >>>> >>>> >>>> -- >>>> You received this message because you are subscribed to the Google >>>> Groups "Nighthawk Motorcycle Lovers!" group. >>>> To unsubscribe from this group and stop receiving emails from it, send >>>> an email to nighthawk_love...@googlegroups.com. >>>> To view this discussion on the web visit >>>> https://groups.google.com/d/msgid/nighthawk_lovers/e6fdaff2-c6cc-418a-b79e-3b31bf77efcfn%40googlegroups.com >>>> <https://groups.google.com/d/msgid/nighthawk_lovers/e6fdaff2-c6cc-418a-b79e-3b31bf77efcfn%40googlegroups.com?utm_medium=email&utm_source=footer> >>>> . >>>> >>> -- > You received this message because you are subscribed to the Google Groups > "Nighthawk Motorcycle Lovers!" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to nighthawk_lovers+unsubscr...@googlegroups.com. > To view this discussion on the web visit > https://groups.google.com/d/msgid/nighthawk_lovers/7ddfb0b5-1edb-48d1-b704-1f66c5c25a93n%40googlegroups.com > <https://groups.google.com/d/msgid/nighthawk_lovers/7ddfb0b5-1edb-48d1-b704-1f66c5c25a93n%40googlegroups.com?utm_medium=email&utm_source=footer> > . > -- You received this message because you are subscribed to the Google Groups "Nighthawk Motorcycle Lovers!" group. To unsubscribe from this group and stop receiving emails from it, send an email to nighthawk_lovers+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/nighthawk_lovers/CAJARLXUGrh-g%2BxCOvGiRKPieydwBTNPV02RB8Bncu-39qy5CqQ%40mail.gmail.com.
