I took it off the power for a while, to let the caps discharge. I guess I need to get the right long handle torx drivers to be able to un-do the Compaq loving torx screws.
Chris Faulkner wrote: > also, try unplugging the power, hold the power button in for about 10 > sec to de flea it, then plug the power back in. Also if that doesn't > work reset CMOS. Reseat the video card. or try another video card. > > On Fri, Nov 21, 2008 at 9:11 AM, Drew <[EMAIL PROTECTED] > <mailto:[EMAIL PROTECTED]>> wrote: > > > > On Fri, Nov 21, 2008 at 9:07 AM, Jack Coats <[EMAIL PROTECTED] > <mailto:[EMAIL PROTECTED]>> wrote: > > > I have an old iPaq desktop with legacy ports that was working. > I shut > it down one day gracefully, and tried > starting it the next morning, and it is not generating any > video output, > and it gives a short beep > followed by a long beep. > > I have tried to find what it means, and have pulled out the > memory cards > and re-set them, with > the same results. > > Suggestions? (Cash flow precludes replacement at this point.) > > > Have you tried a replacement video card? Is it an option on that > system? If memory serves, you're in Ashland City, if you don't > have a video card to test in it, post what you need, and I'll dig > through the hardware I've got laying around and see if I've got > something that might work. > > > > > > > -- > Chris Faulkner > 615-653-4400 (Skype: chris.faulkner615) > Linux/Unix/Windows Network Engineer > > LinkedIn TeamNashville Group: 1100+ members: > http://www.linkedin.com/groups?gid=76329 > BBS Enthusiast group: http://groups.google.com/group/80sbbs > > > --~--~---------~--~----~------------~-------~--~----~ You received this message because you are subscribed to the Google Groups "NLUG" group. To post to this group, send email to [email protected] To unsubscribe from this group, send email to [EMAIL PROTECTED] For more options, visit this group at http://groups.google.com/group/nlug-talk?hl=en -~----------~----~----~----~------~----~------~--~---
