Hey everyone,
I have a Raspberry Pi that I have been using as a wireless router. It's
running the latest version of raspbian. Today I have been trying to swap
out the old belkin wireless g USB WIFI adapter I was using with 'hostapd'.
The new wifi adapter is a Railink RT3072 Wireless N USB adapter I got from
monoprice.
I also have a USB 2.0 Ethernet adapter attached to the Pi which is being
used as a DHCP server for my wired LAN and it is working fine.
My problem is that for some reason none of my wireless devices are able to
receive an IP from the new Railink RT3072 wifi adapter connected to the Pi.
Both the ethernet adapter and the wifi adapter I'm using are connected to
the same separately powered USB hub, so this shouldn't be a power issue.
I have checked and double checked my dhcpd, hostapd, and iptables conf
files and can't figure out what I am doing wrong.
I was wondering if any of you have any insight? I've attached copies of my
iptables, hostapd, and dhcpd configuration files.
Thank You!
--
--
You received this message because you are subscribed to the Google Groups
"NLUG" group.
To post to this group, send email to [email protected]
To unsubscribe from this group, send email to
[email protected]
For more options, visit this group at
http://groups.google.com/group/nlug-talk?hl=en
---
You received this message because you are subscribed to the Google Groups
"NLUG" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
For more options, visit https://groups.google.com/groups/opt_out.
# Generated by iptables-save v1.4.14 on Fri Jan 24 01:04:24 2014
*filter
:INPUT ACCEPT [272:44499]
:FORWARD ACCEPT [2057:1161138]
:OUTPUT ACCEPT [45:3572]
-A FORWARD -i eth0 -o wlan0 -m state --state RELATED,ESTABLISHED -j ACCEPT
-A FORWARD -i wlan0 -o eth0 -j ACCEPT
-A FORWARD -i eth1 -o wlan0 -m state --state RELATED,ESTABLISHED -j ACCEPT
-A FORWARD -i wlan0 -o eth1 -j ACCEPT
-A FORWARD -i wlan0 -o eth1 -m state --state RELATED,ESTABLISHED -j ACCEPT
-A FORWARD -i eth1 -o wlan0 -j ACCEPT
COMMIT
# Completed on Fri Jan 24 01:04:24 2014
# Generated by iptables-save v1.4.14 on Fri Jan 24 01:04:24 2014
*nat
:PREROUTING ACCEPT [590:60741]
:INPUT ACCEPT [11:3390]
:OUTPUT ACCEPT [13:1176]
:POSTROUTING ACCEPT [2:376]
-A POSTROUTING -o eth0 -j MASQUERADE
COMMIT
# Completed on Fri Jan 24 01:04:24 2014
#
# Sample configuration file for ISC dhcpd for Debian
#
#
# The ddns-updates-style parameter controls whether or not the server will
# attempt to do a DNS update when a lease is confirmed. We default to the
# behavior of the version 2 packages ('none', since DHCP v2 didn't
# have support for DDNS.)
ddns-update-style none;
# option definitions common to all supported networks...
# option domain-name "example.org";
# option domain-name-servers ns1.example.org, ns2.example.org;
default-lease-time 600;
max-lease-time 7200;
# If this DHCP server is the official DHCP server for the local
# network, the authoritative directive should be uncommented.
authoritative;
# Use this to send dhcp log messages to a different log file (you also
# have to hack syslog.conf to complete the redirection).
log-facility local7;
# No service will be given on this subnet, but declaring it helps the
# DHCP server to understand the network topology.
#subnet 10.152.187.0 netmask 255.255.255.0 {
#}
# This is a very basic subnet declaration.
#subnet 10.254.239.0 netmask 255.255.255.224 {
# range 10.254.239.10 10.254.239.20;
# option routers rtr-239-0-1.example.org, rtr-239-0-2.example.org;
#}
# This declaration allows BOOTP clients to get dynamic addresses,
# which we don't really recommend.
subnet 192.168.1.0 netmask 255.255.255.0 {
range dynamic-bootp 192.168.1.2 192.168.1.254;
option broadcast-address 192.168.1.255;
option routers 192.168.1.1;
option domain-name-servers 24.159.64.23, 24.217.201.67, 24.177.176.38;
default-lease-time 600;
max-lease-time 7200;
option domain-name "RIES-WLAN";
}
subnet 192.168.2.0 netmask 255.255.255.0 {
range dynamic-bootp 192.168.2.2 192.168.2.254;
option broadcast-address 192.168.2.255;
option routers 192.168.2.1;
option domain-name-servers 24.159.64.23, 24.217.201.67, 24.177.176.38;
default-lease-time 600;
max-lease-time 7200;
option domain-name "RIES-LAN";
}
# Hosts which require special configuration options can be listed in
# host statements. If no address is specified, the address will be
# allocated dynamically (if possible), but the host-specific information
# will still come from the host declaration.
#host passacaglia {
# hardware ethernet 0:0:c0:5d:bd:95;
# filename "vmunix.passacaglia";
# server-name "toccata.fugue.com";
#}
# Fixed IP addresses can also be specified for hosts. These addresses
# should not also be listed as being available for dynamic assignment.
# Hosts for which fixed IP addresses have been specified can boot using
# BOOTP or DHCP. Hosts for which no fixed address is specified can only
# be booted with DHCP, unless there is an address range on the subnet
# to which a BOOTP client is connected which has the dynamic-bootp flag
# set.
#host fantasia {
# hardware ethernet 08:00:07:26:c0:a5;
# fixed-address fantasia.fugue.com;
#}
# You can declare a class of clients and then do address allocation
# based on that. The example below shows a case where all clients
# in a certain class get addresses on the 10.17.224/24 subnet, and all
# other clients get addresses on the 10.0.29/24 subnet.
#class "foo" {
# match if substring (option vendor-class-identifier, 0, 4) = "SUNW";
#}
#shared-network 224-29 {
# subnet 10.17.224.0 netmask 255.255.255.0 {
# option routers rtr-224.example.org;
# }
# subnet 10.0.29.0 netmask 255.255.255.0 {
# option routers rtr-29.example.org;
# }
# pool {
# allow members of "foo";
# range 10.17.224.10 10.17.224.250;
# }
# pool {
# deny members of "foo";
# range 10.0.29.10 10.0.29.230;
# }
#}
interface=wlan0
ssid=LEBANON_POLICE
# wmm_enabled=1
hw_mode=g
# ieee80211n=1
# ht_capab=[HT40+] [SHORT-GI-40]
channel=7
macaddr_acl=0
# auth_algs=1
ignore_broadcast_ssid=0
# wpa=2
# wpa_passphrase=HAIRYherringHURRY#h8
# wpa_key_mgmt=WPA-PSK
# wpa_pairwise=TKIP
# rsn_pairwise=CCMP
