A great DIY project. Do two a day and you'll be finished at the end of a week and cost is low. Just be sure any paint or finish is completely set before using. Paul Tabo
On Fri, Jul 25, 2014 at 6:07 PM, Curt Lundgren <[email protected]> wrote: > Thanks Bruce. Because it was a prototype I didn't bother with the USB > cable details. The drive is USB-powered, so there's just one cable on the > drive. > > > On Fri, Jul 25, 2014 at 8:52 AM, Bruce W. Martin <[email protected]> > wrote: > >> What i do not see in this mockup is any way for the cable of the BluRay >> burner to get out of the cavity. Be sure to make room for both the cable >> and connector. >> >> Bruce >> >> On Jul 23, 2014, at 12:33 PM, Chris McQuistion <[email protected]> >> wrote: >> >> > We've got something that we've made a wooden mockup for, but we're >> interested in getting more of them made by injection molding or 3D printing? >> > >> > Does anyone know if there is a place here in town that would do that >> for us? We only need about 16 units. >> > >> > Here are some pictures of the design. It is about 8" x 9" x 1.25" >> > >> > This is to house a Blu Ray burner under an Apple display that needs to >> be raised by about 1.25" >> > >> > Chris >> >> -- >> -- >> You received this message because you are subscribed to the Google Groups >> "NLUG" group. >> To post to this group, send email to [email protected] >> To unsubscribe from this group, send email to >> [email protected] >> For more options, visit this group at >> http://groups.google.com/group/nlug-talk?hl=en >> >> --- >> You received this message because you are subscribed to the Google Groups >> "NLUG" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to [email protected]. >> For more options, visit https://groups.google.com/d/optout. >> > > -- > -- > You received this message because you are subscribed to the Google Groups > "NLUG" group. > To post to this group, send email to [email protected] > To unsubscribe from this group, send email to > [email protected] > For more options, visit this group at > http://groups.google.com/group/nlug-talk?hl=en > > --- > You received this message because you are subscribed to the Google Groups > "NLUG" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > For more options, visit https://groups.google.com/d/optout. > -- -- You received this message because you are subscribed to the Google Groups "NLUG" group. To post to this group, send email to [email protected] To unsubscribe from this group, send email to [email protected] For more options, visit this group at http://groups.google.com/group/nlug-talk?hl=en --- You received this message because you are subscribed to the Google Groups "NLUG" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
