I think that's what I have actually. On 28 May 2015 1:37 pm, "Tilghman Lesher" <[email protected]> wrote:
> Have you considered the AdaFruit board? They generally do a good job > of putting out inexpensive Pi-supported hardware (I have one of their > touchscreens), and it looks like their PN532 NFC controller would do > what you want. And it looks like it's on the 13.56MHz band. > > http://www.adafruit.com/products/364 > > On Thu, May 28, 2015 at 12:48 PM, Andrew Farnsworth <[email protected]> > wrote: > > Hey everyone, > > I've got a project that would benefit from being able to read an RFID > card > > and I am building it on a Raspberry Pi (or Pi2) anyone have any > experience > > with RFID readers (and writers) who can suggest hardware? I am still > trying > > to figure out if the system I am trying to integrate with uses the 13.56 > Mhz > > or the 125 Khz frequency. At the moment I am assuming the 125 Khz. > > > > Ideally I would like something that will fit inside the Raspberry Pi > case, > > but am aware this might not be a reasonable request. > > > > Andy > > > > -- > > -- > > You received this message because you are subscribed to the Google Groups > > "NLUG" group. > > To post to this group, send email to [email protected] > > To unsubscribe from this group, send email to > > [email protected] > > For more options, visit this group at > > http://groups.google.com/group/nlug-talk?hl=en > > > > --- > > You received this message because you are subscribed to the Google Groups > > "NLUG" group. > > To unsubscribe from this group and stop receiving emails from it, send an > > email to [email protected]. > > For more options, visit https://groups.google.com/d/optout. > > > > -- > Tilghman > > -- > -- > You received this message because you are subscribed to the Google Groups > "NLUG" group. > To post to this group, send email to [email protected] > To unsubscribe from this group, send email to > [email protected] > For more options, visit this group at > http://groups.google.com/group/nlug-talk?hl=en > > --- > You received this message because you are subscribed to the Google Groups > "NLUG" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > For more options, visit https://groups.google.com/d/optout. > -- -- You received this message because you are subscribed to the Google Groups "NLUG" group. To post to this group, send email to [email protected] To unsubscribe from this group, send email to [email protected] For more options, visit this group at http://groups.google.com/group/nlug-talk?hl=en --- You received this message because you are subscribed to the Google Groups "NLUG" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
