Perry Myers píše v St 22. 02. 2012 v 11:54 -0500: > >> As answered in the other response, there are kernel command line > >> parameters to set the management_server. Since this will likely be in a > >> pxe environment, setting the pxe profile to include > >> management_server=<engine_url> should be fine. > >> > > I agree it's a valid solution as long as you assume this is relevant > > for PXE only use case. > > Not necessarily... > > Take the ISO/USB Stick and you can embed the kargs into the ISO/USB > itself so that it always boots with that mgmt server arg > > This actually also enables use of 'stateless' combined with static IP > addressing as well. As you can create a USB Stick and embed the kargs > for the NIC configuration, rsyslog config, etc, etc. > > >> Another solution could be to setup a specific DNS SRV record that points > >> to the ovirt-engine and have node automatically query that for the > >> location. > > This was discussed in the past and for some reason not implemented. > > Concerns about security, iirc. Assumption that someone could hijack the > DNS SRV record and provide a man-in-the-middle oVirt Engine server. >
What about DNSSEC validation for DNS records in node? David > If you're paranoid about security, don't use DNS SRV of course, instead > use hardcoded kargs as described above. But for some DNS SRV might be > an ok option > _______________________________________________ > Engine-devel mailing list > [email protected] > http://lists.ovirt.org/mailman/listinfo/engine-devel -- David Jaša, RHCE SPICE QE based in Brno GPG Key: 22C33E24 Fingerprint: 513A 060B D1B4 2A72 7F0D 0278 B125 CD00 22C3 3E24 _______________________________________________ node-devel mailing list [email protected] http://lists.ovirt.org/mailman/listinfo/node-devel
