I reinstalled node and remounter / rw then I checked fs before
activating host (in oVirt Engine) and after (which files have been
changed)... The "ro" problem seems to be in /var/lib/glusterd/. Is there
any way I can change node so this directory would be mounted rw? And to
persist this setting after reboot.
tnx
Dne 24. 10. 2013 15:28, piše Fabian Deutsch:
Am Donnerstag, den 24.10.2013, 15:12 +0200 schrieb Saša Friedrich:
Progress report:
I remounted fs on oVirt nodes rw, started glusterd with no errors.
Then I activated hosts in oVirt Engine. Also no errors! Yei!
Yey! :)
Yes, mount -oremount,rw make's the FS temporarily writeable. But you
will have issues as soon as you reboot.
We'll need to investigate which paths need to be persisted (so the data
written to them survives a reboot) and which only need to be write-able
e.g. for temporary data.
Would you mind opening a bug for this?
Greetings
fabian
Then I created volume (replication), added two bricks (oVirt nodes),
and started volume. Seems fine. I checkd on node1:
# gluster volume info
Volume Name: data_vol
Type: Replicate
Volume ID: a1cdc762-2198-47e2-9b4a-58fd0571b269
Status: Started
Number of Bricks: 1 x 2 = 2
Transport-type: tcp
Bricks:
Brick1: 192.168.254.124:/data/gluster
Brick2: 192.168.254.141:/data/gluster
Options Reconfigured:
storage.owner-gid: 36
storage.owner-uid: 36
auth.allow: *
user.cifs: on
nfs.disable: off
WORKING!
BUT... Now i can not create storage domain. When I hit OK button on
"New storage domain dialog", process is running very long. Eventually
this process stops and returns " Error while executing action Add
Storage Connection: Network error during communication with the
Host".
I'm stuck again :-( in need for HELP!
Could you please provide the logfiles mentioned here:
http://www.ovirt.org/Node_Troubleshooting#Log_Files
Greetings
fabian
tnx
Dne 24. 10. 2013 13:02, piše Mike Burns:
Adding to node-devel list and users list.
-- Mike
Apologies for top posting and typos. This was sent from a mobile device.
Saša Friedrich <[email protected]> wrote:
Hello!
Acording to http://www.ovirt.org/Node_Glusterfs_Support glusterfs on
ovirt node should be supported. But I have some difficulties to
implement it.
I installed ovirt (nested kvm - home testing) following "Up and Running
with oVirt 3.3) using Fedora19
Install went well. Everything is working fine.
Now I created two hosts (nested kvm - ovirt node fc19 - just for
testing) and added them in oVirt.
Super fine - working!
Now I'd like to use this hosts as glustefs nodes too. Acording to google
(I'm googling for two days now) I'ts possible, but I can not find any
usable how-to
1. I removed these two hosts from default data center
2. I created new data center (type: GlusterFS)
3. I created new cluster (Enable Gluster Service checked)
4. I added host
5. Now I get error message in events: "Could not find gluster uuid of
server host1 on Cluster Cluster1."
If I ssh to my host (fc19 node) glusterd.service is not running. If I
try to run it It returns error
here is the log:
[2013-10-24 09:52:25.969899] I [glusterfsd.c:1910:main]
0-/usr/sbin/glusterd: Started running /usr/sbin/glusterd version 3.4.0
(/usr/sbin/glusterd -p /run/glusterd.pid)
[2013-10-24 09:52:25.974480] I [glusterd.c:962:init] 0-management: Using
/var/lib/glusterd as working directory
[2013-10-24 09:52:25.977648] I [socket.c:3480:socket_init]
0-socket.management: SSL support is NOT enabled
[2013-10-24 09:52:25.977694] I [socket.c:3495:socket_init]
0-socket.management: using system polling thread
[2013-10-24 09:52:25.978611] W [rdma.c:4197:__gf_rdma_ctx_create]
0-rpc-transport/rdma: rdma_cm event channel creation failed (No such device)
[2013-10-24 09:52:25.978651] E [rdma.c:4485:init] 0-rdma.management:
Failed to initialize IB Device
[2013-10-24 09:52:25.978667] E [rpc-transport.c:320:rpc_transport_load]
0-rpc-transport: 'rdma' initialization failed
[2013-10-24 09:52:25.978747] W [rpcsvc.c:1387:rpcsvc_transport_create]
0-rpc-service: cannot create listener, initing the transport failed
[2013-10-24 09:52:25.979890] I
[glusterd.c:354:glusterd_check_gsync_present] 0-glusterd:
geo-replication module not installed in the system
[2013-10-24 09:52:25.980000] E [store.c:394:gf_store_handle_retrieve]
0-: Unable to retrieve store handle /var/lib/glusterd/glusterd.info,
error: No such file or directory
[2013-10-24 09:52:25.980026] E
[glusterd-store.c:1277:glusterd_retrieve_op_version] 0-: Unable to get
store handle!
[2013-10-24 09:52:25.980048] E [store.c:394:gf_store_handle_retrieve]
0-: Unable to retrieve store handle /var/lib/glusterd/glusterd.info,
error: No such file or directory
[2013-10-24 09:52:25.980060] E
[glusterd-store.c:1378:glusterd_retrieve_uuid] 0-: Unable to get store
handle!
[2013-10-24 09:52:25.980074] I
[glusterd-store.c:1348:glusterd_restore_op_version] 0-management:
Detected new install. Setting op-version to maximum : 2
[2013-10-24 09:52:25.980309] E [store.c:360:gf_store_handle_new] 0-:
Failed to open file: /var/lib/glusterd/options, error: Read-only file system
Acording to log /var/lib/glusterd/glusterd.info is missing and can not
be created because fs is mounted "ro".
Now I'm stuck!
What am I missing?
tnx for help!
_______________________________________________
node-devel mailing list
[email protected]
http://lists.ovirt.org/mailman/listinfo/node-devel
_______________________________________________
node-devel mailing list
[email protected]
http://lists.ovirt.org/mailman/listinfo/node-devel
