nananananananana Natman! https://github.com/marak/natman
( CLI tool based on nat-pmp ) Thanks Nate! On Sun, Aug 5, 2012 at 3:39 PM, Nathan Rajlich <[email protected]>wrote: > If you've wanted to forward your ports programmatically before, and have a > NAT-PMP compatible route (basically an Apple router), then this module is > for you. You can get what the router believes is the external IP address, > as well as open and close UDP and TCP ports to the computer sending the > commands. > > I recently ran into the need to forward a port on my home router without > having access to the Airport Utility running at my home. This was the > solution, to run a quick node script to open the SSH port for an hour while > I did my thing. And no router configuration or rebooting was required, so > it served my need perfectly. Hopefully you may enjoy it as well. Cheers! > > npm: https://npmjs.org/package/nat-pmp > GitHub: https://github.com/TooTallNate/node-nat-pmp > > -- > Job Board: http://jobs.nodejs.org/ > Posting guidelines: > https://github.com/joyent/node/wiki/Mailing-List-Posting-Guidelines > You received this message because you are subscribed to the Google > Groups "nodejs" group. > To post to this group, send email to [email protected] > To unsubscribe from this group, send email to > [email protected] > For more options, visit this group at > http://groups.google.com/group/nodejs?hl=en?hl=en > -- Job Board: http://jobs.nodejs.org/ Posting guidelines: https://github.com/joyent/node/wiki/Mailing-List-Posting-Guidelines You received this message because you are subscribed to the Google Groups "nodejs" group. To post to this group, send email to [email protected] To unsubscribe from this group, send email to [email protected] For more options, visit this group at http://groups.google.com/group/nodejs?hl=en?hl=en
