Hi Carlos Thanks for the output. I have just double-checked and the tests run clean on the G5 hardware we have here. We are in the process of setting up some G4 hardware and I will be testing on that as soon as it is ready. I'll keep you posted on the progress.
Regards Mike On Saturday, 26 October 2013 13:37:16 UTC+1, Carlos Arija wrote: > > Hi Mike. > > It works. Great job. > Test's output in the attached file. Quite a bunch of crashed and failed > tests. > > Regards. > Carlos > > > El jueves, 24 de octubre de 2013 16:30:32 UTC+2, Michael Tunnicliffe > escribió: >> >> Hi Carlos >> >> Excellent, your machine should be covered by the fix documented in >> https://github.com/andrewlow/v8ppc/issues/96 (which covers AT_PLATFORM >> values of "ppc7450" and "ppc970"), please do try it out and let me know if >> it works for you. >> >> Regards >> Mike >> >> On Thursday, 24 October 2013 08:00:20 UTC+1, Carlos Arija wrote: >>> >>> AT_DCACHEBSIZE: 0x20 >>> AT_ICACHEBSIZE: 0x20 >>> AT_UCACHEBSIZE: 0x0 >>> AT_SYSINFO_EHDR: 0x100000 >>> AT_HWCAP: mmu fpu altivec ppc32 >>> AT_PAGESZ: 4096 >>> AT_CLKTCK: 100 >>> AT_PHDR: 0x10000034 >>> AT_PHENT: 32 >>> AT_PHNUM: 9 >>> AT_BASE: 0x48000000 >>> AT_FLAGS: 0x0 >>> AT_ENTRY: 0x10000c9c >>> AT_UID: 1000 >>> AT_EUID: 1000 >>> AT_GID: 1000 >>> AT_EGID: 1000 >>> AT_SECURE: 0 >>> AT_RANDOM: 0xbfa3ee60 >>> AT_EXECFN: /bin/true >>> AT_PLATFORM: ppc7450 >>> AT_BASE_PLATFORM:ppc7450 >>> >>> >>> El miércoles, 23 de octubre de 2013 17:40:29 UTC+2, Michael Tunnicliffe >>> escribió: >>>> >>>> Hi Carlos >>>> >>>> I've implemented a fix for this, documented in >>>> https://github.com/andrewlow/v8ppc/issues/96 but I want to check that >>>> it will be applied for you. >>>> Can you run the following command on your machine and report the >>>> results, so I can check it is covered? >>>> >>>> >>>> LD_SHOW_AUXV=1 /bin/true >>>> >>>> Thanks >>>> Mike >>>> >>>> On Wednesday, 16 October 2013 12:10:37 UTC+1, Carlos Arija wrote: >>>>> >>>>> First of all, please do not put much time in this problem. It is just >>>>> a test. >>>>> Any way, here are the iBook G4 specs, if they are of any use to you. >>>>> And if I could be of any help in your project, just tell me. >>>>> >>>>> /etc/issue >>>>> Debian GNU/Linux 7 \n \l >>>>> >>>>> /proc/cpuinfo >>>>> processor : 0 >>>>> cpu : 7447A, altivec supported >>>>> clock : 1199.999000MHz >>>>> revision : 1.2 (pvr 8003 0102) >>>>> bogomips : 73.72 >>>>> timebase : 18432000 >>>>> platform : PowerMac >>>>> model : PowerBook6,5 >>>>> machine : PowerBook6,5 >>>>> motherboard : PowerBook6,5 MacRISC3 Power Macintosh >>>>> detected as : 287 (iBook G4) >>>>> pmac flags : 0000001b >>>>> L2 cache : 512K unified >>>>> pmac-generation : NewWorld >>>>> Memory : 1280 MB >>>>> >>>>> Attachment: result of ./node -trace, until the program crashed with an >>>>> "illegal instruction" >>>>> >>>>> >>>>> El martes, 15 de octubre de 2013 22:15:28 UTC+2, Andrew Low escribió: >>>>>> >>>>>> I've got some good news and some bad news. >>>>>> >>>>>> Bad news - I can't replicate your problem. >>>>>> >>>>>> Good news - I was able to dig up an old PowerMac running Ubuntu. >>>>>> >>>>>> $ cat /etc/issue >>>>>> Ubuntu 10.04.4 LTS \n \l >>>>>> >>>>>> Unfortunately it appears to be a G5, not a G4. >>>>>> >>>>>> $ cat /proc/cpuinfo >>>>>> processor : 0 >>>>>> cpu : PPC970FX, altivec supported >>>>>> clock : 1800.000000MHz >>>>>> revision : 3.0 (pvr 003c 0300) >>>>>> >>>>>> processor : 1 >>>>>> cpu : PPC970FX, altivec supported >>>>>> clock : 1800.000000MHz >>>>>> revision : 3.0 (pvr 003c 0300) >>>>>> >>>>>> timebase : 33333333 >>>>>> platform : PowerMac >>>>>> model : PowerMac7,3 >>>>>> machine : PowerMac7,3 >>>>>> motherboard : PowerMac7,3 MacRISC4 Power Macintosh >>>>>> detected as : 336 (PowerMac G5) >>>>>> pmac flags : 00000000 >>>>>> L2 cache : 512K unified >>>>>> pmac-generation : NewWorld >>>>>> >>>>>> FWIW - v8 seems to bootstrap just fine >>>>>> >>>>>> $ ./out/ppc.debug/d8 >>>>>> V8 version 3.14.5 (candidate) [console: dumb] >>>>>> d8> 3+4 >>>>>> 7 >>>>>> d8> >>>>>> >>>>>> >>>>>> >>>>>> -- -- Job Board: http://jobs.nodejs.org/ Posting guidelines: https://github.com/joyent/node/wiki/Mailing-List-Posting-Guidelines You received this message because you are subscribed to the Google Groups "nodejs" group. To post to this group, send email to [email protected] To unsubscribe from this group, send email to [email protected] For more options, visit this group at http://groups.google.com/group/nodejs?hl=en?hl=en --- You received this message because you are subscribed to the Google Groups "nodejs" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/groups/opt_out.
