On Thu, Jan 30, 2014 at 1:03 PM, raf <[email protected]> wrote:
> Hello, > > > so i checked my liblo version : > > [seijitsu@astrux lib]$ pacman -Qs liblo > > local/liblo 1:0.26-2 > > A lightweight OSC (Open Sound Control) implementation > > > > it not the latest one (0.28), may it have influence ? > > I have not installed gdb yet on the system, and debugging the program > > may take some time. > > > > Let me know if the above new information can help understand why the > > strip messages don't reach non engine. > > > > thanks > > Raphaël > > > > > > I have not tried 0.28 yet. 0.26 should work. The message "protocol > '(null)' not supported" is strange. You say you're running remotely via ssh > -X. If so, then try running regular non-mixer (not noui). In the module > parameter editor you should see the correct osc path in the info bar when > you hover the mouse over the control you want to affect. Is it as you > expected? > > strangely the problem is gone, and now osc control is working ...!?! > What i have done (for unrelated reasons) : stop the computer, add a wifi > pcie card, restart the computer. > I'm not sure if adding a second network card could have an influence, or > is it just rebooting (the headless computer is running 24/7). > OSC messages are received and handled correctly whatever network interface > them come from. > > In the meantime, i had added debug messages in the OSC code, for nothing, > except to become familiar with it ;) > > consider the case closed, until the problem comes back, and i investigate > again. > Now building my setup, i'm excited =! > > Raphaël > > Good to hear. Yeah, once you confirmed the pathnames I really didn't have any other idea what it could be but a networking problem. FYI the 'hello' message has a pretty specific syntax/meaning, so I'm not surprised that there was an error when you sent that manually.
