This is an automated email from the ASF dual-hosted git repository.
wusheng pushed a commit to branch master
in repository https://gitbox.apache.org/repos/asf/skywalking-nginx-lua.git
The following commit(s) were added to refs/heads/master by this push:
new 29b293e migrate kong plugin (#75)
29b293e is described below
commit 29b293edaf8207ed1cee0e8736f97b9583871878
Author: Daming <[email protected]>
AuthorDate: Sun Apr 18 14:25:05 2021 +0800
migrate kong plugin (#75)
---
.github/workflows/e2e.yaml | 2 -
README.md | 2 -
kong/README.md | 51 -
kong/plugins/skywalking/handler.lua | 82 --
kong/plugins/skywalking/schema.lua | 69 -
.../kong-plugin-skywalking-0.5.0-0.rockspec | 24 -
.../kong-plugin-skywalking-master-0.rockspec | 24 -
test/e2e/e2e-test/kong/docker/conf/kong.conf | 1393 --------------------
test/e2e/e2e-test/kong/docker/entrypoint.sh | 29 -
test/e2e/e2e-test/kong/pom.xml | 144 --
.../apache/skywalking/e2e/DataAssertITCase.java | 149 ---
.../kong/src/test/resources/expectedData.yaml | 61 -
test/e2e/e2e-test/pom.xml | 1 -
13 files changed, 2031 deletions(-)
diff --git a/.github/workflows/e2e.yaml b/.github/workflows/e2e.yaml
index f26eafd..c7bae69 100644
--- a/.github/workflows/e2e.yaml
+++ b/.github/workflows/e2e.yaml
@@ -44,5 +44,3 @@ jobs:
run: ./mvnw -f ./test/e2e/pom.xml package
- name: Run Nginx Test
run: ./mvnw -f ./test/e2e/e2e-test/nginx/pom.xml verify
- - name: Run Kong Test
- run: ./mvnw -f ./test/e2e/e2e-test/kong/pom.xml verify
\ No newline at end of file
diff --git a/README.md b/README.md
index e9e1f89..9d133c1 100644
--- a/README.md
+++ b/README.md
@@ -13,8 +13,6 @@ Apache SkyWalking Nginx Agent
This agent follows the SkyWalking tracing and header protocol. It reports
tracing data to SkyWalking APM through HTTP protocol.
All HTTP 1.1 requests go through Nginx could be collected by this agent.
-[SkyWalking Kong plugin](/kong/README.md) built on SkyWalking Nginx Lua Agent
to trace Kong API Gateway.
-
# Setup Doc
```nginx
diff --git a/kong/README.md b/kong/README.md
deleted file mode 100644
index 4ebed7a..0000000
--- a/kong/README.md
+++ /dev/null
@@ -1,51 +0,0 @@
-Apache SkyWalking Nginx Agent For Kong
-==========
-
-This plugin base on Apache SkyWalking Nginx Agent for the Kong API gateway to
integrate with the Apache SkyWalking distributed tracing system.
-
-## Usage
-
-1. Install the plugin on Kong:
-
-To install kong-plugin-skywalking:
-```bash
-$ luarocks install kong-plugin-skywalking --local
-```
-
-Edit kong.conf:
-```
-plugins = bundled,skywalking
-
-lua_package_path = ${user.home}/.luarocks/share/lua/5.1/?.lua;;
-```
-
-Set environment:
-```bash
-$ export KONG_NGINX_HTTP_LUA_SHARED_DICT="tracing_buffer 128m"
-```
-
-Restart Kong
-
-2. Enabling & configuring plugin:
-
-Add the plugin to an API:
-
-```bash
-$ curl -i -X POST \
- --url http://localhost:8001/apis/{api_name}/plugins/ \
- --data 'name=skywalking' \
- --data 'config.backend_http_uri=http://localhost:12800' \
- --data 'config.sample_ratio=100' \
- --data 'config.service_name=kong'
- --data 'config.service_instance_name=kong-with-skywalking'
-```
-
-Add the plugin to global:
-```bash
-$ curl -X POST --url http://localhost:8001/plugins/ \
- --data 'name=skywalking' \
- --data 'config.backend_http_uri=http://localhost:12800' \
- --data 'config.sample_ratio=100' \
- --data 'config.service_name=kong'
- --data 'config.service_instance_name=kong-with-skywalking'
-```
\ No newline at end of file
diff --git a/kong/plugins/skywalking/handler.lua
b/kong/plugins/skywalking/handler.lua
deleted file mode 100644
index 58a9a6e..0000000
--- a/kong/plugins/skywalking/handler.lua
+++ /dev/null
@@ -1,82 +0,0 @@
---
--- Licensed to the Apache Software Foundation (ASF) under one or more
--- contributor license agreements. See the NOTICE file distributed with
--- this work for additional information regarding copyright ownership.
--- The ASF licenses this file to You under the Apache License, Version 2.0
--- (the "License"); you may not use this file except in compliance with
--- the License. You may obtain a copy of the License at
---
--- http://www.apache.org/licenses/LICENSE-2.0
---
--- Unless required by applicable law or agreed to in writing, software
--- distributed under the License is distributed on an "AS IS" BASIS,
--- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
--- See the License for the specific language governing permissions and
--- limitations under the License.
---
-
-local tracer = require("skywalking.tracer")
-local client = require("skywalking.client")
-local Span = require('skywalking.span')
-
-local subsystem = ngx.config.subsystem
-
-local SkyWalkingHandler = {
- PRIORITY = 100001,
- VERSION = "0.0.1",
-}
-
-function SkyWalkingHandler:init_worker()
- require("skywalking.util").set_randomseed()
-end
-
-function SkyWalkingHandler:access(config)
- if subsystem == "stream" then
- kong.log.warn("Not supportted to trace \"stream\" request yet.")
- return
- end
-
- if config.sample_ratio == 1 or math.random() * 100 < config.sample_ratio
then
- kong.ctx.plugin.skywalking_sample = true
-
- if not client:isInitialized() then
- local metadata_buffer = ngx.shared.tracing_buffer
- metadata_buffer:set('serviceName', config.service_name)
- metadata_buffer:set('serviceInstanceName',
config.service_instance_name)
- metadata_buffer:set('includeHostInEntrySpan',
config.include_host_in_entry_span)
-
- client:startBackendTimer(config.backend_http_uri)
- end
-
- tracer:start(kong.request.get_forwarded_host())
- end
-end
-
-function SkyWalkingHandler:body_filter(config)
- if ngx.arg[2] and kong.ctx.plugin.skywalking_sample then
- local entrySpan = ngx.ctx.entrySpan
- Span.setComponentId(entrySpan, 6001)
- Span.tag(entrySpan, 'kong.node', kong.node.get_hostname())
-
- local service = kong.router.get_service()
- if service and service.id then
- Span.tag(entrySpan, 'kong.service', service.id)
- local route = kong.router.get_route()
- if route and route.id then
- Span.tag(entrySpan, "kong.route", route.id)
- end
- if type(service.name) == "string" then
- Span.tag(entrySpan, "kong.service_name", service.name)
- end
- end
- Span.setComponentId(ngx.ctx.exitSpan, 6001)
-
- tracer:finish()
- end
-end
-
-function SkyWalkingHandler:log(config)
- tracer:prepareForReport()
-end
-
-return SkyWalkingHandler
diff --git a/kong/plugins/skywalking/schema.lua
b/kong/plugins/skywalking/schema.lua
deleted file mode 100644
index f78ac2d..0000000
--- a/kong/plugins/skywalking/schema.lua
+++ /dev/null
@@ -1,69 +0,0 @@
---
--- Licensed to the Apache Software Foundation (ASF) under one or more
--- contributor license agreements. See the NOTICE file distributed with
--- this work for additional information regarding copyright ownership.
--- The ASF licenses this file to You under the Apache License, Version 2.0
--- (the "License"); you may not use this file except in compliance with
--- the License. You may obtain a copy of the License at
---
--- http://www.apache.org/licenses/LICENSE-2.0
---
--- Unless required by applicable law or agreed to in writing, software
--- distributed under the License is distributed on an "AS IS" BASIS,
--- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
--- See the License for the specific language governing permissions and
--- limitations under the License.
---
-
-local typedefs = require "kong.db.schema.typedefs"
-
-return {
- name = "skywalking",
- fields = {
- {
- consumer = typedefs.no_consumer
- },
- {
- protocols = typedefs.protocols_http
- },
- {
- config = {
- type = "record",
- fields = {
- {
- backend_http_uri = {
- type = "string",
- required = true
- }
- },
- {
- service_name = {
- type = "string",
- required = true
- }
- },
- {
- service_instance_name = {
- type = "string",
- required = false
- }
- },
- {
- include_host_in_entry_span = {
- type = "boolean",
- default = false
- }
- },
- {
- sample_ratio = {
- type = "number",
- between = { 1 , 100 },
- default = 1
- }
- }
- },
- },
- },
- },
- entity_checks = {},
-}
\ No newline at end of file
diff --git a/kong/rockspec/kong-plugin-skywalking-0.5.0-0.rockspec
b/kong/rockspec/kong-plugin-skywalking-0.5.0-0.rockspec
deleted file mode 100644
index ea7d2ce..0000000
--- a/kong/rockspec/kong-plugin-skywalking-0.5.0-0.rockspec
+++ /dev/null
@@ -1,24 +0,0 @@
-package = "kong-plugin-skywalking"
-version = "0.5.0-0"
-source = {
- url = "git://github.com/apache/skywalking-nginx-lua",
- branch = "v0.5.0",
-}
-
-description = {
- summary = "The Nginx Lua agent for Apache SkyWalking",
- homepage = "https://github.com/apache/skywalking-nginx-lua";,
- license = "Apache License 2.0"
-}
-
-dependencies = {
- "skywalking-nginx-lua >= 0.5.0"
-}
-
-build = {
- type = "builtin",
- modules = {
- ["kong.plugins.skywalking.handler"] =
"kong/plugins/skywalking/handler.lua",
- ["kong.plugins.skywalking.schema"] = "kong/plugins/skywalking/schema.lua"
- }
-}
diff --git a/kong/rockspec/kong-plugin-skywalking-master-0.rockspec
b/kong/rockspec/kong-plugin-skywalking-master-0.rockspec
deleted file mode 100644
index d5f3661..0000000
--- a/kong/rockspec/kong-plugin-skywalking-master-0.rockspec
+++ /dev/null
@@ -1,24 +0,0 @@
-package = "kong-plugin-skywalking"
-version = "master-0"
-source = {
- url = "git://github.com/apache/skywalking-nginx-lua",
- branch = "master",
-}
-
-description = {
- summary = "The Nginx Lua agent for Apache SkyWalking",
- homepage = "https://github.com/apache/skywalking-nginx-lua";,
- license = "Apache License 2.0"
-}
-
-dependencies = {
- "skywalking-nginx-lua >= master"
-}
-
-build = {
- type = "builtin",
- modules = {
- ["kong.plugins.skywalking.handler"] =
"kong/plugins/skywalking/handler.lua",
- ["kong.plugins.skywalking.schema"] = "kong/plugins/skywalking/schema.lua"
- }
-}
diff --git a/test/e2e/e2e-test/kong/docker/conf/kong.conf
b/test/e2e/e2e-test/kong/docker/conf/kong.conf
deleted file mode 100755
index a84c298..0000000
--- a/test/e2e/e2e-test/kong/docker/conf/kong.conf
+++ /dev/null
@@ -1,1393 +0,0 @@
-# -----------------------
-# Kong configuration file
-# -----------------------
-#
-# The commented-out settings shown in this file represent the default values.
-#
-# This file is read when `kong start` or `kong prepare` are used. Kong
-# generates the Nginx configuration with the settings specified in this file.
-#
-# All environment variables prefixed with `KONG_` and capitalized will override
-# the settings specified in this file.
-# Example:
-# `log_level` setting -> `KONG_LOG_LEVEL` env variable
-#
-# Boolean values can be specified as `on`/`off` or `true`/`false`.
-# Lists must be specified as comma-separated strings.
-#
-# All comments in this file can be removed safely, including the
-# commented-out properties.
-# You can verify the integrity of your settings with `kong check <conf>`.
-
-#------------------------------------------------------------------------------
-# GENERAL
-#------------------------------------------------------------------------------
-
-#prefix = /usr/local/kong/ # Working directory. Equivalent to Nginx's
- # prefix path, containing temporary files
- # and logs.
- # Each Kong process must have a separate
- # working directory.
-
-#log_level = notice # Log level of the Nginx server. Logs are
- # found at `<prefix>/logs/error.log`.
-
-# See http://nginx.org/en/docs/ngx_core_module.html#error_log for a list
-# of accepted values.
-
-#proxy_access_log = logs/access.log # Path for proxy port request access
- # logs. Set this value to `off` to
- # disable logging proxy requests.
- # If this value is a relative path,
- # it will be placed under the
- # `prefix` location.
-
-#proxy_error_log = logs/error.log # Path for proxy port request error
- # logs. The granularity of these logs
- # is adjusted by the `log_level`
- # property.
-
-#admin_access_log = logs/admin_access.log # Path for Admin API request access
- # logs. If Hybrid Mode is enabled
- # and the current node is set to be
- # the Control Plane, then the
- # connection requests from Data
Planes
- # are also written to this file with
- # server name
"kong_cluster_listener".
- #
- # Set this value to `off` to
- # disable logging Admin API requests.
- # If this value is a relative path,
- # it will be placed under the
- # `prefix` location.
-
-#admin_error_log = logs/error.log # Path for Admin API request error
- # logs. The granularity of these logs
- # is adjusted by the `log_level`
- # property.
-
-#status_access_log = off # Path for Status API request access
- # logs. The default value of `off`
- # implies that loggin for this API
- # is disabled by default.
- # If this value is a relative path,
- # it will be placed under the
- # `prefix` location.
-
-#status_error_log = logs/status_error.log # Path for Status API request error
- # logs. The granularity of these logs
- # is adjusted by the `log_level`
- # property.
-
-plugins = bundled,skywalking # Comma-separated list of plugins
this node
- # should load. By default, only plugins
- # bundled in official distributions are
- # loaded via the `bundled` keyword.
- #
- # Loading a plugin does not enable it by
- # default, but only instructs Kong to load its
- # source code, and allows to configure the
- # plugin via the various related Admin API
- # endpoints.
- #
- # The specified name(s) will be substituted as
- # such in the Lua namespace:
- # `kong.plugins.{name}.*`.
- #
- # When the `off` keyword is specified as the
- # only value, no plugins will be loaded.
- #
- # `bundled` and plugin names can be mixed
- # together, as the following examples suggest:
- #
- # - `plugins = bundled,custom-auth,custom-log`
- # will include the bundled plugins plus two
- # custom ones
- # - `plugins = custom-auth,custom-log` will
- # *only* include the `custom-auth` and
- # `custom-log` plugins.
- # - `plugins = off` will not include any
- # plugins
- #
- # **Note:** Kong will not start if some
- # plugins were previously configured (i.e.
- # have rows in the database) and are not
- # specified in this list. Before disabling a
- # plugin, ensure all instances of it are
- # removed before restarting Kong.
- #
- # **Note:** Limiting the amount of available
- # plugins can improve P99 latency when
- # experiencing LRU churning in the database
- # cache (i.e. when the configured
- # `mem_cache_size`) is full.
-
-#pluginserver_names = # Comma-separated list of names for
pluginserver
- # processes. The actual names are used for
- # log messages and to relate the actual
settings.
-
-#pluginserver_XXX_socket = <prefix>/<XXX>.socket # Path to the unix
socket
- # used by the
<XXX> pluginserver.
-#pluginserver_XXX_start_cmd = /usr/local/bin/<XXX> # Full command
(including
- # any needed
arguments) to
- # start the <XXX>
pluginserver
-#pluginserver_XXX_query_cmd = /usr/local/bin/query_<XXX> # Full command to
"query" the
- # <XXX>
pluginserver. Should
- # produce a JSON
with the
- # dump info of all
plugins it
- # manages
-
-#port_maps = # With this configuration parameter, you can
- # let the Kong to know about the port from
- # which the packets are forwarded to it. This
- # is fairly common when running Kong in a
- # containerized or virtualized environment.
- # For example, `port_maps=80:8000, 443:8443`
- # instructs Kong that the port 80 is mapped
- # to 8000 (and the port 443 to 8443), where
- # 8000 and 8443 are the ports that Kong is
- # listening to.
- #
- # This parameter helps Kong set a proper
- # forwarded upstream HTTP request header or to
- # get the proper forwarded port with the Kong
PDK
- # (in case other means determining it has
- # failed). It changes routing by a destination
- # port to route by a port from which packets
- # are forwarded to Kong, and similarly it
- # changes the default plugin log serializer to
- # use the port according to this mapping
- # instead of reporting the port Kong is
- # listening to.
-
-#anonymous_reports = on # Send anonymous usage data such as error
- # stack traces to help improve Kong.
-
-#------------------------------------------------------------------------------
-# HYBRID MODE
-#------------------------------------------------------------------------------
-
-#role = traditional # Use this setting to enable Hybrid Mode,
- # This allows running some Kong nodes in a
- # control plane role with a database and
- # have them deliver configuration updates
- # to other nodes running to DB-less running in
- # a Data Plane role.
- #
- # Valid values to this setting are:
- #
- # - `traditional`: do not use Hybrid Mode.
- # - `control_plane`: this node runs in a
- # control plane role. It can use a database
- # and will deliver configuration updates
- # to data plane nodes.
- # - `data_plane`: this is a data plane node.
- # It runs DB-less and receives configuration
- # updates from a control plane node.
-
-#cluster_mtls = shared # Sets the verification between nodes of the
- # cluster.
- #
- # Valid values to this setting are:
- #
- # - `shared`: use a shared certificate/key
- # pair specified with the `cluster_cert`
- # and `cluster_cert_key` settings.
- # Note that CP and DP nodes have to present
- # the same certificate to establish mTLS
- # connections.
- # - `pki`: use `cluster_ca_cert`,
- # `cluster_server_name` and `cluster_cert`
- # for verification.
- # These are different certificates for each
- # DP node, but issued by a cluster-wide
- # common CA certificate: `cluster_ca_cert`.
-
-#cluster_cert = # Filename of the cluster certificate to use
- # when establishing secure communication
- # between control and data plane nodes.
- # You can use the `kong hybrid` command to
- # generate the certificate/key pair.
- # Under `shared` mode, it must be the same
- # for all nodes. Under `pki` mode it
- # should be a different certificate for each
- # DP node.
-
-#cluster_cert_key = # Filename of the cluster certificate key to
- # use when establishing secure communication
- # between control and data plane nodes.
- # You can use the `kong hybrid` command to
- # generate the certificate/key pair.
- # Under `shared` mode, it must be the same
- # for all nodes. Under `pki` mode it
- # should be a different certificate for each
- # DP node.
-
-#cluster_ca_cert = # The trusted CA certificate file in PEM
- # format used to verify the `cluster_cert`.
- # Required if `cluster_mtls` is set to `pki`,
- # ignored otherwise.
-
-#------------------------------------------------------------------------------
-# HYBRID MODE DATA PLANE
-#------------------------------------------------------------------------------
-
-#cluster_server_name = # The server name used in the SNI of the TLS
- # connection from a DP node to a CP node.
- # Must match the Common Name (CN) or Subject
- # Alternative Name (SAN) found in the CP
- # certificate.
- # If `cluster_mtls` is set to
- # `shared`, this setting is ignored and
- # `kong_clustering` is used.
-
-#cluster_control_plane = # To be used by data plane nodes only:
- # address of the control plane node from
- # which configuration updates will be fetched,
- # in `host:port` format.
-
-#------------------------------------------------------------------------------
-# HYBRID MODE CONTROL PLANE
-#------------------------------------------------------------------------------
-
-#cluster_listen = 0.0.0.0:8005
- # Comma-separated list of addresses and ports on
- # which the cluster control plane server should listen
- # for data plane connections.
- # The cluster communication port of the control plane
- # must be accessible by all the data planes
- # within the same cluster. This port is mTLS protected
- # to ensure end-to-end security and integrity.
- #
- # This setting has no effect if `role` is not set to
- # `control_plane`.
- #
- # Connection made to this endpoint are logged
- # to the same location as Admin API access logs.
- # See `admin_access_log` config description for more
- # information.
-
-#cluster_data_plane_purge_delay = 1209600
- # How many seconds must pass from the time a DP node
- # becomes offline to the time its entry gets removed
- # from the database, as returned by the
- # /clustering/data-planes Admin API endpoint.
- #
- # This is to prevent the cluster data plane table from
- # growing indefinitely. The default is set to
- # 14 days. That is, if CP haven't heard from a DP for
- # 14 days, its entry will be removed.
-
-#------------------------------------------------------------------------------
-# NGINX
-#------------------------------------------------------------------------------
-
-#proxy_listen = 0.0.0.0:8000 reuseport backlog=16384, 0.0.0.0:8443 http2 ssl
reuseport backlog=16384
- # Comma-separated list of addresses and ports on
- # which the proxy server should listen for
- # HTTP/HTTPS traffic.
- # The proxy server is the public entry point of Kong,
- # which proxies traffic from your consumers to your
- # backend services. This value accepts IPv4, IPv6, and
- # hostnames.
- #
- # Some suffixes can be specified for each pair:
- #
- # - `ssl` will require that all connections made
- # through a particular address/port be made with TLS
- # enabled.
- # - `http2` will allow for clients to open HTTP/2
- # connections to Kong's proxy server.
- # - `proxy_protocol` will enable usage of the
- # PROXY protocol for a given address/port.
- # - `deferred` instructs to use a deferred accept on
- # Linux (the TCP_DEFER_ACCEPT socket option).
- # - `bind` instructs to make a separate bind() call
- # for a given address:port pair.
- # - `reuseport` instructs to create an individual
- # listening socket for each worker process
- # allowing the Kernel to better distribute incoming
- # connections between worker processes
- # - `backlog=N` sets the maximum length for the queue
- # of pending TCP connections. This number should
- # not be too small in order to prevent clients
- # seeing "Connection refused" error connecting to
- # a busy Kong instance.
- # **Note:** on Linux, this value is limited by the
- # setting of `net.core.somaxconn` Kernel parameter.
- # In order for the larger `backlog` set here to take
- # effect it is necessary to raise
- # `net.core.somaxconn` at the same time to match or
- # exceed the `backlog` number set.
- #
- # This value can be set to `off`, thus disabling
- # the HTTP/HTTPS proxy port for this node.
- # If stream_listen is also set to `off`, this enables
- # 'control-plane' mode for this node
- # (in which all traffic proxying capabilities are
- # disabled). This node can then be used only to
- # configure a cluster of Kong
- # nodes connected to the same datastore.
- #
- # Example:
- # `proxy_listen = 0.0.0.0:443 ssl, 0.0.0.0:444 http2
ssl`
- #
- # See
http://nginx.org/en/docs/http/ngx_http_core_module.html#listen
- # for a description of the accepted formats for this
- # and other `*_listen` values.
- #
- # See
https://www.nginx.com/resources/admin-guide/proxy-protocol/
- # for more details about the `proxy_protocol`
- # parameter.
- #
- # Not all `*_listen` values accept all formats
- # specified in nginx's documentation.
-
-#stream_listen = off
- # Comma-separated list of addresses and ports on
- # which the stream mode should listen.
- #
- # This value accepts IPv4, IPv6, and hostnames.
- # Some suffixes can be specified for each pair:
- # - `ssl` will require that all connections made
- # through a particular address/port be made with TLS
- # enabled.
- # - `proxy_protocol` will enable usage of the
- # PROXY protocol for a given address/port.
- # - `bind` instructs to make a separate bind() call
- # for a given address:port pair.
- # - `reuseport` instructs to create an individual
- # listening socket for each worker process
- # allowing the Kernel to better distribute incoming
- # connections between worker processes
- # - `backlog=N` sets the maximum length for the queue
- # of pending TCP connections. This number should
- # not be too small in order to prevent clients
- # seeing "Connection refused" error connecting to
- # a busy Kong instance.
- # **Note:** on Linux, this value is limited by the
- # setting of `net.core.somaxconn` Kernel parameter.
- # In order for the larger `backlog` set here to take
- # effect it is necessary to raise
- # `net.core.somaxconn` at the same time to match or
- # exceed the `backlog` number set.
- #
- # **Note:** The `ssl` suffix is not supported,
- # and each address/port will accept TCP with or
- # without TLS enabled.
- #
- # Examples:
- #
- # ```
- # stream_listen = 127.0.0.1:7000 reuseport
backlog=16384
- # stream_listen = 0.0.0.0:989 reuseport
backlog=65536, 0.0.0.0:20
- # stream_listen = [::1]:1234 backlog=16384
- # ```
- #
- # By default this value is set to `off`, thus
- # disabling the stream proxy port for this node.
-
-# See http://nginx.org/en/docs/stream/ngx_stream_core_module.html#listen
-# for a description of the formats that Kong might accept in stream_listen.
-
-#admin_listen = 127.0.0.1:8001 reuseport backlog=16384, 127.0.0.1:8444 http2
ssl reuseport backlog=16384
- # Comma-separated list of addresses and ports on
- # which the Admin interface should listen.
- # The Admin interface is the API allowing you to
- # configure and manage Kong.
- # Access to this interface should be *restricted*
- # to Kong administrators *only*. This value accepts
- # IPv4, IPv6, and hostnames.
- #
- # Some suffixes can be specified for each pair:
- #
- # - `ssl` will require that all connections made
- # through a particular address/port be made with TLS
- # enabled.
- # - `http2` will allow for clients to open HTTP/2
- # connections to Kong's proxy server.
- # - `proxy_protocol` will enable usage of the
- # PROXY protocol for a given address/port.
- # - `deferred` instructs to use a deferred accept on
- # Linux (the TCP_DEFER_ACCEPT socket option).
- # - `bind` instructs to make a separate bind() call
- # for a given address:port pair.
- # - `reuseport` instructs to create an individual
- # listening socket for each worker process
- # allowing the Kernel to better distribute incoming
- # connections between worker processes
- # - `backlog=N` sets the maximum length for the queue
- # of pending TCP connections. This number should
- # not be too small in order to prevent clients
- # seeing "Connection refused" error connecting to
- # a busy Kong instance.
- # **Note:** on Linux, this value is limited by the
- # setting of `net.core.somaxconn` Kernel parameter.
- # In order for the larger `backlog` set here to take
- # effect it is necessary to raise
- # `net.core.somaxconn` at the same time to match or
- # exceed the `backlog` number set.
- #
- # This value can be set to `off`, thus disabling
- # the Admin interface for this node, enabling a
- # 'data-plane' mode (without configuration
- # capabilities) pulling its configuration changes
- # from the database.
- #
- # Example: `admin_listen = 127.0.0.1:8444 http2 ssl`
-
-#status_listen = off # Comma-separated list of addresses and ports on
- # which the Status API should listen.
- # The Status API is a read-only endpoint
- # allowing monitoring tools to retrieve metrics,
- # healthiness, and other non-sensitive information
- # of the current Kong node.
- #
- # The following suffix can be specified for each pair:
- #
- # - `ssl` will require that all connections made
- # through a particular address/port be made with TLS
- # enabled.
- #
- # This value can be set to `off`, disabling
- # the Status API for this node.
- #
- # Example: `status_listen = 0.0.0.0:8100`
-
-
-#nginx_user = kong kong # Defines user and group credentials used by
- # worker processes. If group is omitted, a
- # group whose name equals that of user is
- # used.
- #
- # Example: `nginx_user = nginx www`
- #
- # **Note**: If the `kong` user and the `kong`
- # group are not available, the default user
- # and group credentials will be
- # `nobody nobody`.
-
-#nginx_worker_processes = auto # Determines the number of worker processes
- # spawned by Nginx.
- #
- # See
http://nginx.org/en/docs/ngx_core_module.html#worker_processes
- # for detailed usage of the equivalent Nginx
- # directive and a description of accepted
- # values.
-
-#nginx_daemon = on # Determines whether Nginx will run as a
daemon
- # or as a foreground process. Mainly useful
- # for development or when running Kong inside
- # a Docker environment.
- #
- # See
http://nginx.org/en/docs/ngx_core_module.html#daemon.
-
-#mem_cache_size = 128m # Size of each of the two in-memory caches
- # for database entities. The accepted units
are
- # `k` and `m`, with a minimum recommended
value of
- # a few MBs.
- #
- # **Note**: As this option controls the size
of two
- # different cache entries, the total memory
Kong
- # uses to cache entities might be double this
value.
-
-#ssl_cipher_suite = intermediate # Defines the TLS ciphers served by Nginx.
- # Accepted values are `modern`,
- # `intermediate`, `old`, or `custom`.
- #
- # See
https://wiki.mozilla.org/Security/Server_Side_TLS
- # for detailed descriptions of each cipher
- # suite.
-
-#ssl_ciphers = # Defines a custom list of TLS ciphers to be
- # served by Nginx. This list must conform to
- # the pattern defined by `openssl ciphers`.
- # This value is ignored if `ssl_cipher_suite`
- # is not `custom`.
-
-#ssl_protocols = TLSv1.1 TLSv1.2 TLSv1.3
- # Enables the specified protocols for
- # client-side connections. The set of
- # supported protocol versions also depends
- # on the version of OpenSSL Kong was built
- # with. This value is ignored if
- # `ssl_cipher_suite` is not `custom`.
- #
- # See
http://nginx.org/en/docs/http/ngx_http_ssl_module.html#ssl_protocols
-
-#ssl_prefer_server_ciphers = on # Specifies that server ciphers should be
- # preferred over client ciphers when using
- # the SSLv3 and TLS protocols. This value is
- # ignored if `ssl_cipher_suite` is not
`custom`.
- #
- # See
http://nginx.org/en/docs/http/ngx_http_ssl_module.html#ssl_prefer_server_ciphers
-
-#ssl_dhparam = # Defines DH parameters for DHE ciphers from
the
- # predefined groups: `ffdhe2048`, `ffdhe3072`,
- # `ffdhe4096`, `ffdhe6144`, `ffdhe8192`, or
- # from the absolute path to a parameters file.
- #
- # This value is ignored if `ssl_cipher_suite`
- # is `modern` or `intermediate`. The reason is
- # that `modern` has no ciphers that needs
this,
- # and `intermediate` uses `ffdhe2048`.
- #
- # See
http://nginx.org/en/docs/http/ngx_http_ssl_module.html#ssl_dhparam
-
-#ssl_session_tickets = on # Enables or disables session resumption
through
- # TLS session tickets. This has no impact when
- # used with TLSv1.3.
- #
- # Kong enables this by default for performance
- # reasons, but it has security implications:
- #
https://github.com/mozilla/server-side-tls/issues/135
- #
- # See
http://nginx.org/en/docs/http/ngx_http_ssl_module.html#ssl_session_tickets
-
-#ssl_session_timeout = 1d # Specifies a time during which a client may
- # reuse the session parameters. See the
rationale:
- #
https://github.com/mozilla/server-side-tls/issues/198
- #
- # See
http://nginx.org/en/docs/http/ngx_http_ssl_module.html#ssl_session_timeout
-
-#ssl_cert = # The absolute path to the SSL certificate for
- # `proxy_listen` values with SSL enabled.
-
-#ssl_cert_key = # The absolute path to the SSL key for
- # `proxy_listen` values with SSL enabled.
-
-#client_ssl = off # Determines if Nginx should send client-side
- # SSL certificates when proxying requests.
-
-#client_ssl_cert = # If `client_ssl` is enabled, the absolute
- # path to the client SSL certificate for the
- # `proxy_ssl_certificate` directive. Note that
- # this value is statically defined on the
- # node, and currently cannot be configured on
- # a per-API basis.
-
-#client_ssl_cert_key = # If `client_ssl` is enabled, the absolute
- # path to the client SSL key for the
- # `proxy_ssl_certificate_key` address. Note
- # this value is statically defined on the
- # node, and currently cannot be configured on
- # a per-API basis.
-
-#admin_ssl_cert = # The absolute path to the SSL certificate for
- # `admin_listen` values with SSL enabled.
-
-#admin_ssl_cert_key = # The absolute path to the SSL key for
- # `admin_listen` values with SSL enabled.
-
-#status_ssl_cert = # The absolute path to the SSL certificate for
- # `status_listen` values with SSL enabled.
-
-#status_ssl_cert_key = # The absolute path to the SSL key for
- # `status_listen` values with SSL enabled.
-
-#headers = server_tokens, latency_tokens
- # Comma-separated list of headers Kong should
- # inject in client responses.
- #
- # Accepted values are:
- # - `Server`: Injects `Server: kong/x.y.z`
- # on Kong-produced response (e.g. Admin
- # API, rejected requests from auth plugin).
- # - `Via`: Injects `Via: kong/x.y.z` for
- # successfully proxied requests.
- # - `X-Kong-Proxy-Latency`: Time taken
- # (in milliseconds) by Kong to process
- # a request and run all plugins before
- # proxying the request upstream.
- # - `X-Kong-Response-Latency`: time taken
- # (in millisecond) by Kong to produce
- # a response in case of e.g. plugin
- # short-circuiting the request, or in
- # in case of an error.
- # - `X-Kong-Upstream-Latency`: Time taken
- # (in milliseconds) by the upstream
- # service to send response headers.
- # - `X-Kong-Admin-Latency`: Time taken
- # (in milliseconds) by Kong to process
- # an Admin API request.
- # - `X-Kong-Upstream-Status`: The HTTP status
- # code returned by the upstream service.
- # This is particularly useful for clients to
- # distinguish upstream statuses if the
- # response is rewritten by a plugin.
- # - `server_tokens`: Same as specifying both
- # `Server` and `Via`.
- # - `latency_tokens`: Same as specifying
- # `X-Kong-Proxy-Latency`,
- # `X-Kong-Response-Latency`,
- # `X-Kong-Admin-Latency` and
- # `X-Kong-Upstream-Latency`
- #
- # In addition to those, this value can be set
- # to `off`, which prevents Kong from injecting
- # any of the above headers. Note that this
- # does not prevent plugins from injecting
- # headers of their own.
- #
- # Example: `headers = via, latency_tokens`
-
-#trusted_ips = # Defines trusted IP addresses blocks that are
- # known to send correct `X-Forwarded-*`
- # headers.
- # Requests from trusted IPs make Kong forward
- # their `X-Forwarded-*` headers upstream.
- # Non-trusted requests make Kong insert its
- # own `X-Forwarded-*` headers.
- #
- # This property also sets the
- # `set_real_ip_from` directive(s) in the Nginx
- # configuration. It accepts the same type of
- # values (CIDR blocks) but as a
- # comma-separated list.
- #
- # To trust *all* /!\ IPs, set this value to
- # `0.0.0.0/0,::/0`.
- #
- # If the special value `unix:` is specified,
- # all UNIX-domain sockets will be trusted.
- #
- # See
http://nginx.org/en/docs/http/ngx_http_realip_module.html#set_real_ip_from
- # for examples of accepted values.
-
-#real_ip_header = X-Real-IP # Defines the request header field whose value
- # will be used to replace the client address.
- # This value sets the `ngx_http_realip_module`
- # directive of the same name in the Nginx
- # configuration.
- #
- # If this value receives `proxy_protocol`:
- #
- # - at least one of the `proxy_listen` entries
- # must have the `proxy_protocol` flag
- # enabled.
- # - the `proxy_protocol` parameter will be
- # appended to the `listen` directive of the
- # Nginx template.
- #
- # See
http://nginx.org/en/docs/http/ngx_http_realip_module.html#real_ip_header
- # for a description of this directive.
-
-#real_ip_recursive = off # This value sets the `ngx_http_realip_module`
- # directive of the same name in the Nginx
- # configuration.
- #
- # See
http://nginx.org/en/docs/http/ngx_http_realip_module.html#real_ip_recursive
- # for a description of this directive.
-
-#error_default_type = text/plain # Default MIME type to use when the request
- # `Accept` header is missing and Nginx
- # is returning an error for the request.
- # Accepted values are `text/plain`,
- # `text/html`, `application/json`, and
- # `application/xml`.
-
-#upstream_keepalive_pool_size = 60 # Sets the default size of the upstream
- # keepalive connection pools.
- # Upstream keepalive connection pools
- # are segmented by the `dst ip/dst
- # port/SNI` attributes of a connection.
- # A value of `0` will disable upstream
- # keepalive connections by default, forcing
- # each upstream request to open a new
- # connection.
-
-#upstream_keepalive_max_requests = 100 # Sets the default maximum number of
- # requests than can be proxied upstream
- # through one keepalive connection.
- # After the maximum number of requests
- # is reached, the connection will be
- # closed.
- # A value of `0` will disable this
- # behavior, and a keepalive connection
- # can be used to proxy an indefinite
- # number of requests.
-
-#upstream_keepalive_idle_timeout = 60 # Sets the default timeout (in seconds)
- # for which an upstream keepalive
- # connection should be kept open. When
- # the timeout is reached while the
- # connection has not been reused, it
- # will be closed.
- # A value of `0` will disable this
- # behavior, and an idle keepalive
- # connection may be kept open
- # indefinitely.
-
-#------------------------------------------------------------------------------
-# NGINX injected directives
-#------------------------------------------------------------------------------
-
-# Nginx directives can be dynamically injected in the runtime nginx.conf file
-# without requiring a custom Nginx configuration template.
-#
-# All configuration properties respecting the naming scheme
-# `nginx_<namespace>_<directive>` will result in `<directive>` being injected
in
-# the Nginx configuration block corresponding to the property's `<namespace>`.
-# Example:
-# `nginx_proxy_large_client_header_buffers = 8 24k`
-#
-# Will inject the following directive in Kong's proxy `server {}` block:
-#
-# `large_client_header_buffers 8 24k;`
-#
-# The following namespaces are supported:
-#
-# - `nginx_main_<directive>`: Injects `<directive>` in Kong's configuration
-# `main` context.
-# - `nginx_events_<directive>`: Injects `<directive>` in Kong's `events {}`
-# block.
-# - `nginx_http_<directive>`: Injects `<directive>` in Kong's `http {}` block.
-# - `nginx_proxy_<directive>`: Injects `<directive>` in Kong's proxy
-# `server {}` block.
-# - `nginx_upstream_<directive>`: Injects `<directive>` in Kong's proxy
-# `upstream {}` block.
-# - `nginx_admin_<directive>`: Injects `<directive>` in Kong's Admin API
-# `server {}` block.
-# - `nginx_status_<directive>`: Injects `<directive>` in Kong's Status API
-# `server {}` block (only effective if `status_listen` is enabled).
-# - `nginx_stream_<directive>`: Injects `<directive>` in Kong's stream module
-# `stream {}` block (only effective if `stream_listen` is enabled).
-# - `nginx_sproxy_<directive>`: Injects `<directive>` in Kong's stream module
-# `server {}` block (only effective if `stream_listen` is enabled).
-# - `nginx_supstream_<directive>`: Injects `<directive>` in Kong's stream
-# module `upstream {}` block.
-#
-# As with other configuration properties, Nginx directives can be injected via
-# environment variables when capitalized and prefixed with `KONG_`.
-# Example:
-# `KONG_NGINX_HTTP_SSL_PROTOCOLS` -> `nginx_http_ssl_protocols`
-#
-# Will inject the following directive in Kong's `http {}` block:
-#
-# `ssl_protocols <value>;`
-#
-# If different sets of protocols are desired between the proxy and Admin API
-# server, you may specify `nginx_proxy_ssl_protocols` and/or
-# `nginx_admin_ssl_protocols`, both of which taking precedence over the
-# `http {}` block.
-
-#nginx_main_worker_rlimit_nofile = auto
- # Changes the limit on the maximum number of
open files
- # for worker processes.
- #
- # The special and default value of `auto`
sets this
- # value to `ulimit -n` with the upper bound
limited to
- # 16384 as a measure to protect against
excess memory use.
- #
- # See
http://nginx.org/en/docs/ngx_core_module.html#worker_rlimit_nofile
-
-#nginx_events_worker_connections = auto
- # Sets the maximum number of simultaneous
- # connections that can be opened by a worker
process.
- #
- # The special and default value of `auto`
sets this
- # value to `ulimit -n` with the upper bound
limited to
- # 16384 as a measure to protect against
excess memory use.
- #
- # See
http://nginx.org/en/docs/ngx_core_module.html#worker_connections
-
-#nginx_http_client_header_buffer_size = 1k # Sets buffer size for reading the
- # client request headers.
- # See
http://nginx.org/en/docs/http/ngx_http_core_module.html#client_header_buffer_size
-
-#nginx_http_large_client_header_buffers = 4 8k # Sets the maximum number and
- # size of buffers used for
- # reading large clients
- # requests headers.
- # See
http://nginx.org/en/docs/http/ngx_http_core_module.html#large_client_header_buffers
-
-#nginx_http_client_max_body_size = 0 # Defines the maximum request body size
- # allowed by requests proxied by Kong,
- # specified in the Content-Length request
- # header. If a request exceeds this
- # limit, Kong will respond with a 413
- # (Request Entity Too Large). Setting
- # this value to 0 disables checking the
- # request body size.
- # See
http://nginx.org/en/docs/http/ngx_http_core_module.html#client_max_body_size
-
-#nginx_admin_client_max_body_size = 10m # Defines the maximum request body
size for
- # Admin API.
-
-#nginx_http_client_body_buffer_size = 8k # Defines the buffer size for reading
- # the request body. If the client
- # request body is larger than this
- # value, the body will be buffered to
- # disk. Note that when the body is
- # buffered to disk, Kong plugins that
- # access or manipulate the request
- # body may not work, so it is
- # advisable to set this value as high
- # as possible (e.g., set it as high
- # as `client_max_body_size` to force
- # request bodies to be kept in
- # memory). Do note that
- # high-concurrency environments will
- # require significant memory
- # allocations to process many
- # concurrent large request bodies.
- # See
http://nginx.org/en/docs/http/ngx_http_core_module.html#client_body_buffer_size
-
-#nginx_admin_client_body_buffer_size = 10m # Defines the buffer size for
reading
- # the request body on Admin API.
-
-#------------------------------------------------------------------------------
-# DATASTORE
-#------------------------------------------------------------------------------
-
-# Kong can run with a database to store coordinated data between Kong nodes in
-# a cluster, or without a database, where each node stores its information
-# independently in memory.
-#
-# When using a database, Kong will store data for all its entities (such as
-# Routes, Services, Consumers, and Plugins) in either Cassandra or PostgreSQL,
-# and all Kong nodes belonging to the same cluster must connect themselves
-# to the same database.
-#
-# Kong supports the following database versions:
-# - **PostgreSQL**: 9.5 and above.
-# - **Cassandra**: 2.2 and above.
-#
-# When not using a database, Kong is said to be in "DB-less mode": it will keep
-# its entities in memory, and each node needs to have this data entered via a
-# declarative configuration file, which can be specified through the
-# `declarative_config` property, or via the Admin API using the `/config`
-# endpoint.
-#
-# When using Postgres as the backend storage, you can optionally enable Kong
-# to serve read queries from a separate database instance.
-# When the number of proxies is large, this can greatly reduce the load
-# on the main Postgres instance and achieve better scalability. It may also
-# reduce the latency jitter if the Kong proxy node's latency to the main
-# Postgres instance is high.
-#
-# The read-only Postgres instance only serves read queries and write
-# queries still goes to the main connection. The read-only Postgres instance
-# can be eventually consistent while replicating changes from the main
-# instance.
-#
-# At least the `pg_ro_host` config is needed to enable this feature.
-# By default, all other database config for the read-only connection are
-# inherited from the corresponding main connection config described above but
-# may be optionally overwritten explicitly using the `pg_ro_*` config below.
-
-#database = postgres # Determines which of PostgreSQL or Cassandra
- # this node will use as its datastore.
- # Accepted values are `postgres`,
- # `cassandra`, and `off`.
-
-#pg_host = 127.0.0.1 # Host of the Postgres server.
-#pg_port = 5432 # Port of the Postgres server.
-#pg_timeout = 5000 # Defines the timeout (in ms), for connecting,
- # reading and writing.
-
-#pg_user = kong # Postgres user.
-#pg_password = # Postgres user's password.
-#pg_database = kong # The database name to connect to.
-
-#pg_schema = # The database schema to use. If unspecified,
- # Kong will respect the `search_path` value of
- # your PostgreSQL instance.
-
-#pg_ssl = off # Toggles client-server TLS connections
- # between Kong and PostgreSQL.
- # Because PostgreSQL uses the same port for
TLS
- # and non-TLS, this is only a hint. If the
- # server does not support TLS, the established
- # connection will be a plain one.
-
-#pg_ssl_verify = off # Toggles server certificate verification if
- # `pg_ssl` is enabled.
- # See the `lua_ssl_trusted_certificate`
- # setting to specify a certificate authority.
-
-#pg_max_concurrent_queries = 0 # Sets the maximum number of concurrent
queries
- # that can be executing at any given time.
This
- # limit is enforced per worker process; the
- # total number of concurrent queries for this
- # node will be will be:
- # `pg_max_concurrent_queries *
nginx_worker_processes`.
- #
- # The default value of 0 removes this
- # concurrency limitation.
-
-#pg_semaphore_timeout = 60000 # Defines the timeout (in ms) after which
- # PostgreSQL query semaphore resource
- # acquisition attempts will fail. Such
- # failures will generally result in the
- # associated proxy or Admin API request
- # failing with an HTTP 500 status code.
- # Detailed discussion of this behavior is
- # available in the online documentation.
-
-#pg_ro_host = # Same as `pg_host`, but for the
- # read-only connection.
- # **Note:** Refer to the documentation
- # section above for detailed usage.
-
-#pg_ro_port = <pg_port> # Same as `pg_port`, but for the
- # read-only connection.
-
-#pg_ro_timeout = <pg_timeout> # Same as `pg_timeout`, but for the
- # read-only connection.
-
-#pg_ro_user = <pg_user> # Same as `pg_user`, but for the
- # read-only connection.
-
-#pg_ro_password = <pg_password> # Same as `pg_password`, but for the
- # read-only connection.
-
-#pg_ro_database = <pg_database> # Same as `pg_database`, but for the
- # read-only connection.
-
-#pg_ro_schema = <pg_schema> # Same as `pg_schema`, but for the
- # read-only connection.
-
-#pg_ro_ssl = <pg_ssl> # Same as `pg_ssl`, but for the
- # read-only connection.
-
-#pg_ro_ssl_verify = <pg_ssl_verify>
- # Same as `pg_ssl_verify`, but for the
- # read-only connection.
-
-#pg_ro_max_concurrent_queries = <pg_max_concurrent_queries>
- # Same as `pg_max_concurrent_queries`, but for
- # the read-only connection.
- # Note: read-only concurrency is not shared
- # with the main (read-write) connection.
-
-#pg_ro_semaphore_timeout = <pg_semaphore_timeout>
- # Same as `pg_semaphore_timeout`, but for the
- # read-only connection.
-
-#cassandra_contact_points = 127.0.0.1 # A comma-separated list of contact
- # points to your cluster.
- # You may specify IP addresses or
- # hostnames. Note that the port
- # component of SRV records will be
- # ignored in favor of `cassandra_port`.
- # When connecting to a multi-DC cluster,
- # ensure that contact points from the
- # local datacenter are specified first
- # in this list.
-
-#cassandra_port = 9042 # The port on which your nodes are listening
- # on. All your nodes and contact points must
- # listen on the same port. Will be created if
- # it doesn't exist.
-
-#cassandra_keyspace = kong # The keyspace to use in your cluster.
-
-#cassandra_write_consistency = ONE # Consistency setting to use when
- # writing to the Cassandra cluster.
-
-#cassandra_read_consistency = ONE # Consistency setting to use when
- # reading from the Cassandra cluster.
-
-#cassandra_timeout = 5000 # Defines the timeout (in ms) for reading
- # and writing.
-
-#cassandra_ssl = off # Toggles client-to-node TLS connections
- # between Kong and Cassandra.
-
-#cassandra_ssl_verify = off # Toggles server certificate verification if
- # `cassandra_ssl` is enabled.
- # See the `lua_ssl_trusted_certificate`
- # setting to specify a certificate authority.
-
-#cassandra_username = kong # Username when using the
- # `PasswordAuthenticator` scheme.
-
-#cassandra_password = # Password when using the
- # `PasswordAuthenticator` scheme.
-
-#cassandra_lb_policy = RequestRoundRobin # Load balancing policy to use when
- # distributing queries across your
- # Cassandra cluster.
- # Accepted values are:
- # `RoundRobin`, `RequestRoundRobin`,
- # `DCAwareRoundRobin`, and
- # `RequestDCAwareRoundRobin`.
- # Policies prefixed with "Request"
- # make efficient use of established
- # connections throughout the same
- # request.
- # Prefer "DCAware" policies if and
- # only if you are using a
- # multi-datacenter cluster.
-
-#cassandra_local_datacenter = # When using the `DCAwareRoundRobin`
- # or `RequestDCAwareRoundRobin` load
- # balancing policy, you must specify the name
- # of the local (closest) datacenter for this
- # Kong node.
-
-#cassandra_refresh_frequency = 60 # Frequency (in seconds) at which
- # the cluster topology will be
- # checked for new or decommissioned
- # nodes.
- # A value of `0` will disable this
- # check, and the cluster topology
- # will never be refreshed.
-
-#cassandra_repl_strategy = SimpleStrategy # When migrating for the first time,
- # Kong will use this setting to
- # create your keyspace.
- # Accepted values are
- # `SimpleStrategy` and
- # `NetworkTopologyStrategy`.
-
-#cassandra_repl_factor = 1 # When migrating for the first time, Kong
- # will create the keyspace with this
- # replication factor when using the
- # `SimpleStrategy`.
-
-#cassandra_data_centers = dc1:2,dc2:3 # When migrating for the first time,
- # will use this setting when using the
- # `NetworkTopologyStrategy`.
- # The format is a comma-separated list
- # made of `<dc_name>:<repl_factor>`.
-
-#cassandra_schema_consensus_timeout = 10000 # Defines the timeout (in ms) for
- # the waiting period to reach a
- # schema consensus between your
- # Cassandra nodes.
- # This value is only used during
- # migrations.
-
-#declarative_config = # The path to the declarative configuration
- # file which holds the specification of all
- # entities (Routes, Services, Consumers, etc.)
- # to be used when the `database` is set to
- # `off`.
- #
- # Entities are stored in Kong's in-memory
cache,
- # so you must ensure that enough memory is
- # allocated to it via the `mem_cache_size`
- # property. You must also ensure that items
- # in the cache never expire, which means that
- # `db_cache_ttl` should preserve its default
- # value of 0.
-
-#------------------------------------------------------------------------------
-# DATASTORE CACHE
-#------------------------------------------------------------------------------
-
-# In order to avoid unnecessary communication with the datastore, Kong caches
-# entities (such as APIs, Consumers, Credentials...) for a configurable period
-# of time. It also handles invalidations if such an entity is updated.
-#
-# This section allows for configuring the behavior of Kong regarding the
-# caching of such configuration entities.
-
-#db_update_frequency = 5 # Frequency (in seconds) at which to check for
- # updated entities with the datastore.
- #
- # When a node creates, updates, or deletes an
- # entity via the Admin API, other nodes need
- # to wait for the next poll (configured by
- # this value) to eventually purge the old
- # cached entity and start using the new one.
-
-#db_update_propagation = 0 # Time (in seconds) taken for an entity in the
- # datastore to be propagated to replica nodes
- # of another datacenter.
- #
- # When in a distributed environment such as
- # a multi-datacenter Cassandra cluster, this
- # value should be the maximum number of
- # seconds taken by Cassandra to propagate a
- # row to other datacenters.
- #
- # When set, this property will increase the
- # time taken by Kong to propagate the change
- # of an entity.
- #
- # Single-datacenter setups or PostgreSQL
- # servers should suffer no such delays, and
- # this value can be safely set to 0.
-
-#db_cache_ttl = 0 # Time-to-live (in seconds) of an entity from
- # the datastore when cached by this node.
- #
- # Database misses (no entity) are also cached
- # according to this setting if you do not
- # configure `db_cache_neg_ttl`.
- #
- # If set to 0 (default), such cached entities
- # or misses never expire.
-
-#db_cache_neg_ttl = # Time-to-live (in seconds) of a datastore
- # miss (no entity).
- #
- # If not specified (default), `db_cache_ttl`
- # value will be used instead.
- #
- # If set to 0, misses will never expire.
-
-#db_resurrect_ttl = 30 # Time (in seconds) for which stale entities
- # from the datastore should be resurrected for
- # when they cannot be refreshed (e.g., the
- # datastore is unreachable). When this TTL
- # expires, a new attempt to refresh the stale
- # entities will be made.
-
-#db_cache_warmup_entities = services
- # Entities to be pre-loaded from the datastore
- # into the in-memory cache at Kong start-up.
- # This speeds up the first access of endpoints
- # that use the given entities.
- #
- # When the `services` entity is configured
- # for warmup, the DNS entries for values in
- # its `host` attribute are pre-resolved
- # asynchronously as well.
- #
- # Cache size set in `mem_cache_size` should
- # be set to a value large enough to hold all
- # instances of the specified entities.
- # If the size is insufficient, Kong will log
- # a warning.
-
-#------------------------------------------------------------------------------
-# DNS RESOLVER
-#------------------------------------------------------------------------------
-
-# By default, the DNS resolver will use the standard configuration files
-# `/etc/hosts` and `/etc/resolv.conf`. The settings in the latter file will be
-# overridden by the environment variables `LOCALDOMAIN` and `RES_OPTIONS` if
-# they have been set.
-#
-# Kong will resolve hostnames as either `SRV` or `A` records (in that order,
and
-# `CNAME` records will be dereferenced in the process).
-# In case a name was resolved as an `SRV` record it will also override any
given
-# port number by the `port` field contents received from the DNS server.
-#
-# The DNS options `SEARCH` and `NDOTS` (from the `/etc/resolv.conf` file) will
-# be used to expand short names to fully qualified ones. So it will first try
-# the entire `SEARCH` list for the `SRV` type, if that fails it will try the
-# `SEARCH` list for `A`, etc.
-#
-# For the duration of the `ttl`, the internal DNS resolver will loadbalance
each
-# request it gets over the entries in the DNS record. For `SRV` records the
-# `weight` fields will be honored, but it will only use the lowest `priority`
-# field entries in the record.
-
-#dns_resolver = # Comma separated list of nameservers, each
- # entry in `ip[:port]` format to be used by
- # Kong. If not specified the nameservers in
- # the local `resolv.conf` file will be used.
- # Port defaults to 53 if omitted. Accepts
- # both IPv4 and IPv6 addresses.
-
-#dns_hostsfile = /etc/hosts # The hosts file to use. This file is read
- # once and its content is static in memory.
- # To read the file again after modifying it,
- # Kong must be reloaded.
-
-#dns_order = LAST,SRV,A,CNAME # The order in which to resolve different
- # record types. The `LAST` type means the
- # type of the last successful lookup (for the
- # specified name). The format is a (case
- # insensitive) comma separated list.
-
-#dns_valid_ttl = # By default, DNS records are cached using
- # the TTL value of a response. If this
- # property receives a value (in seconds), it
- # will override the TTL for all records.
-
-#dns_stale_ttl = 4 # Defines, in seconds, how long a record will
- # remain in cache past its TTL. This value
- # will be used while the new DNS record is
- # fetched in the background.
- # Stale data will be used from expiry of a
- # record until either the refresh query
- # completes, or the `dns_stale_ttl` number of
- # seconds have passed.
-
-#dns_not_found_ttl = 30 # TTL in seconds for empty DNS responses and
- # "(3) name error" responses.
-
-#dns_error_ttl = 1 # TTL in seconds for error responses.
-
-#dns_no_sync = off # If enabled, then upon a cache-miss every
- # request will trigger its own dns query.
- # When disabled multiple requests for the
- # same name/type will be synchronised to a
- # single query.
-
-#------------------------------------------------------------------------------
-# TUNING & BEHAVIOR
-#------------------------------------------------------------------------------
-
-#worker_consistency = strict
- # Defines whether this node should rebuild its
- # state synchronously or asynchronously (the
- # balancers and the router are rebuilt on
- # updates that affects them, e.g., updates to
- # Routes, Services or Upstreams, via the Admin
- # API or loading a declarative configuration
- # file).
- #
- # Accepted values are:
- #
- # - `strict`: the router will be rebuilt
- # synchronously, causing incoming requests
to
- # be delayed until the rebuild is finished.
- # - `eventual`: the router will be rebuilt
- # asynchronously via a recurring background
- # job running every second inside of each
- # worker.
- #
- # Note that `strict` ensures that all workers
- # of a given node will always proxy requests
- # with an identical router, but that increased
- # long tail latency can be observed if
- # frequent Routes and Services updates are
- # expected.
- # Using `eventual` will help preventing long
- # tail latency issues in such cases, but may
- # cause workers to route requests differently
- # for a short period of time after Routes and
- # Services updates.
-
-#worker_state_update_frequency = 5
- # Defines how often the worker state changes
are
- # checked with a background job. When a change
- # is detected, a new router or balancer will
be
- # built, as needed. Raising this value will
- # decrease the load on database servers and
- # result in less jitter in proxy latency, but
- # it might take more time to propagate changes
- # to each individual worker.
-
-#------------------------------------------------------------------------------
-# MISCELLANEOUS
-#------------------------------------------------------------------------------
-
-# Additional settings inherited from lua-nginx-module allowing for more
-# flexibility and advanced usage.
-#
-# See the lua-nginx-module documentation for more information:
-# https://github.com/openresty/lua-nginx-module
-
-
-#lua_ssl_trusted_certificate = # Comma-separated list of paths to certificate
- # authority files for Lua cosockets in PEM
format.
- #
- # The special value `system` attempts to
search for the
- # "usual default" provided by each distro,
according
- # to an arbitrary heuristic. In the current
implementation,
- # The following pathnames will be tested in
order,
- # and the first one found will be used:
- #
- # - /etc/ssl/certs/ca-certificates.crt
(Debian/Ubuntu/Gentoo)
- # - /etc/pki/tls/certs/ca-bundle.crt
(Fedora/RHEL 6)
- # - /etc/ssl/ca-bundle.pem (OpenSUSE)
- # - /etc/pki/tls/cacert.pem (OpenELEC)
- # -
/etc/pki/ca-trust/extracted/pem/tls-ca-bundle.pem (CentOS/RHEL 7)
- # - /etc/ssl/cert.pem (OpenBSD, Alpine)
- #
- # If no file is found on any of these paths,
an error will
- # be raised.
- #
- # `system` can be used by itself or in
conjunction with other
- # CA filepaths.
- #
- # When `pg_ssl_verify` or
`cassandra_ssl_verify`
- # are enabled, these certificate authority
files will be
- # used for verifying Kong's database
connections.
- #
- # See
https://github.com/openresty/lua-nginx-module#lua_ssl_trusted_certificate
-
-#lua_ssl_verify_depth = 1 # Sets the verification depth in the server
- # certificates chain used by Lua cosockets,
- # set by `lua_ssl_trusted_certificate`.
- # This includes the certificates configured
- # for Kong's database connections.
- # If the maximum depth is reached before
- # reaching the end of the chain, verification
- # will fail. This helps mitigate certificate
- # based DoS attacks.
- #
- # See
https://github.com/openresty/lua-nginx-module#lua_ssl_verify_depth
-
-lua_package_path = /home/kong/.luarocks/share/lua/5.1/?.lua;;
-#lua_package_path = ./?.lua;./?/init.lua; # Sets the Lua module search path
- # (LUA_PATH). Useful when developing
- # or using custom plugins not stored
- # in the default search path.
- #
- # See
https://github.com/openresty/lua-nginx-module#lua_package_path
-
-#lua_package_cpath = # Sets the Lua C module search path
- # (LUA_CPATH).
- #
- # See
https://github.com/openresty/lua-nginx-module#lua_package_cpath
-
-#lua_socket_pool_size = 30 # Specifies the size limit for every cosocket
- # connection pool associated with every remote
- # server.
- #
- # See
https://github.com/openresty/lua-nginx-module#lua_socket_pool_size
-
-#untrusted_lua = sandbox
- # Accepted values are:
- #
- # - `off`: disallow any loading of Lua
functions
- # from admin supplied sources (such
as via the Admin API).
- #
- # Note using the `off` option will
render plugins such as
- # Serverless Functions unusable.
- # - `sandbox`: allow loading of Lua functions
from admin
- # supplied sources, but use a
sandbox when
- # executing them. The sandboxed
- # function will have restricted
access
- # to the global environment and
only
- # have access to standard Lua
functions
- # that will generally not cause
harm to
- # the Kong node.
- #
- # In this mode, the `require`
function inside
- # the sandbox only allows
loading external Lua
- # modules that are explicitly
listed in
- #
`untrusted_lua_sandbox_requires` below.
- #
- # LuaJIT bytecode loading is
disabled.
- #
- # Warning: LuaJIT is not
designed as a secure
- # runtime for running malicious
code, therefore,
- # you should properly protect
your Admin API endpoint
- # even with sandboxing enabled.
The sandbox only
- # provides protection against
trivial attackers or
- # unintentional modification of
the Kong global
- # environment.
- # - `on`: allow loading of Lua functions from
admin
- # supplied sources and do not use a
sandbox when
- # executing them. Functions will have
unrestricted
- # access to global environment and
able to load any
- # Lua modules. This is similar to the
behavior in Kong
- # prior to 2.3.0.
- #
- # LuaJIT bytecode loading is disabled.
-
-#untrusted_lua_sandbox_requires =
- # Comma-separated list of modules allowed to
be loaded
- # with `require` inside the sandboxed
environment. Ignored
- # if `untrusted_lua` is not `sandbox`.
- #
- # Note: certain modules, when allowed, may
cause sandbox
- # escaping trivial.
-
-#untrusted_lua_sandbox_environment =
- # Comma-separated list of global Lua variables
- # that should be made available inside the
sandboxed
- # environment. Ignored if `untrusted_lua` is
not `sandbox`.
- #
- # Note: certain variables, when made
available,
- # may cause sandbox escaping trivial.
diff --git a/test/e2e/e2e-test/kong/docker/entrypoint.sh
b/test/e2e/e2e-test/kong/docker/entrypoint.sh
deleted file mode 100755
index 61e1d2e..0000000
--- a/test/e2e/e2e-test/kong/docker/entrypoint.sh
+++ /dev/null
@@ -1,29 +0,0 @@
-#!/bin/bash
-# Licensed to the Apache Software Foundation (ASF) under one
-# or more contributor license agreements. See the NOTICE file
-# distributed with this work for additional information
-# regarding copyright ownership. The ASF licenses this file
-# to you under the Apache License, Version 2.0 (the
-# "License"); you may not use this file except in compliance
-# with the License. You may obtain a copy of the License at
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing,
-# software distributed under the License is distributed on an
-# "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
-# KIND, either express or implied. See the License for the
-# specific language governing permissions and limitations
-# under the License.
-
-# export KONG_NGINX_HTTP_LUA_SHARED_DICT="tracing_buffer 128m"
-
-cd skywalking-nginx-lua
-
-luarocks make ./rockspec/skywalking-nginx-lua-master-0.rockspec --local
-
-luarocks make ./kong/rockspec/kong-plugin-skywalking-master-0.rockspec --local
-
-kong migrations bootstrap
-
-kong start -c /docker/conf/kong.conf --vv
diff --git a/test/e2e/e2e-test/kong/pom.xml b/test/e2e/e2e-test/kong/pom.xml
deleted file mode 100644
index c4a74f0..0000000
--- a/test/e2e/e2e-test/kong/pom.xml
+++ /dev/null
@@ -1,144 +0,0 @@
-<?xml version="1.0" encoding="UTF-8"?>
-<!--
- ~ Licensed to the Apache Software Foundation (ASF) under one or more
- ~ contributor license agreements. See the NOTICE file distributed with
- ~ this work for additional information regarding copyright ownership.
- ~ The ASF licenses this file to You under the Apache License, Version 2.0
- ~ (the "License"); you may not use this file except in compliance with
- ~ the License. You may obtain a copy of the License at
- ~
- ~ http://www.apache.org/licenses/LICENSE-2.0
- ~
- ~ Unless required by applicable law or agreed to in writing, software
- ~ distributed under the License is distributed on an "AS IS" BASIS,
- ~ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- ~ See the License for the specific language governing permissions and
- ~ limitations under the License.
- ~
- -->
-<project xmlns="http://maven.apache.org/POM/4.0.0";
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance";
- xsi:schemaLocation="http://maven.apache.org/POM/4.0.0
http://maven.apache.org/xsd/maven-4.0.0.xsd";>
- <modelVersion>4.0.0</modelVersion>
-
- <parent>
- <groupId>org.apache.skywalking.plugin.nginx-lua</groupId>
- <artifactId>e2e-test</artifactId>
- <version>1.0.0</version>
- </parent>
-
- <artifactId>kong</artifactId>
- <packaging>jar</packaging>
-
- <build>
- <plugins>
- <plugin>
- <groupId>io.fabric8</groupId>
- <artifactId>docker-maven-plugin</artifactId>
- <configuration>
- <autoCreateCustomNetworks>true</autoCreateCustomNetworks>
- <images>
- <image>
- <name>postgres:9.6</name>
- <alias>kong-database</alias>
- <run>
- <env>
- <POSTGRES_DB>kong</POSTGRES_DB>
- <POSTGRES_USER>kong</POSTGRES_USER>
- <POSTGRES_PASSWORD>kong</POSTGRES_PASSWORD>
- </env>
- <hostname>kong-database</hostname>
- <ports>
- <port>+pg.host:pg.port:5432</port>
- </ports>
- <wait>
- <log>.*PostgreSQL init process complete;
ready for start up.*</log>
- </wait>
- <net>custom</net>
- </run>
- </image>
- <image>
-
<name>skywalking-collector:${project.version}</name>
- <alias>skywalking-collector</alias>
- <run>
- <ports>
-
<port>+collector.host:collector.port:12800</port>
- </ports>
- <wait>
- <http>
-
<url>http://${docker.host.address}:${collector.port}/receiveData</url>
- </http>
- <time>30000</time>
- </wait>
- <net>custom</net>
- <hostname>skywalking-collector</hostname>
- </run>
- </image>
- <image>
- <name>kong:2.3.3</name>
- <alias>kong-with-skywalking</alias>
- <run>
- <volumes>
- <bind>
-
<volume>${project.basedir}/docker:/docker</volume>
-
<volume>${project.basedir}/../../../..:/skywalking-nginx-lua</volume>
- </bind>
- </volumes>
- <ports>
- <port>kong.port:8000</port>
- <port>admin.port:8001</port>
- </ports>
- <env>
- <KONG_DATABASE>postgres</KONG_DATABASE>
- <KONG_PG_HOST>kong-database</KONG_PG_HOST>
- <KONG_PG_PASSWORD>kong</KONG_PG_PASSWORD>
-
<KONG_CASSANDRA_CONTACT_POINTS>kong-database</KONG_CASSANDRA_CONTACT_POINTS>
-
<KONG_NGINX_HTTP_LUA_SHARED_DICT>tracing_buffer 128m
- </KONG_NGINX_HTTP_LUA_SHARED_DICT>
- <KONG_ADMIN_LISTEN>0.0.0.0:8001,
0.0.0.0:8444 ssl</KONG_ADMIN_LISTEN>
- </env>
- <net>custom</net>
- <dependsOn>
- <container>kong-database</container>
- <container>skywalking-collector</container>
- </dependsOn>
- <links>
- <link>kong-database</link>
- </links>
- <wait>
- <http>
- <url>
-
http://${docker.host.address}:${admin.port}
- </url>
- </http>
- <time>1800000</time>
- </wait>
- <cmd>/docker/entrypoint.sh</cmd>
- </run>
- </image>
- </images>
- </configuration>
- </plugin>
-
- <plugin>
- <groupId>org.apache.maven.plugins</groupId>
- <artifactId>maven-failsafe-plugin</artifactId>
- <version>${maven-failsafe-plugin.version}</version>
- <configuration>
- <systemPropertyVariables>
-
<kong.admin.baseURL>http://${docker.host.address}:${admin.port}</kong.admin.baseURL>
-
<service.entry>http://${docker.host.address}:${kong.port}/mock</service.entry>
-
<collector.baseURL>http://${collector.host}:${collector.port}</collector.baseURL>
-
<collector.in.baseURL>http://skywalking-collector:12800</collector.in.baseURL>
- </systemPropertyVariables>
- </configuration>
- <executions>
- <execution>
- <goals>
- <goal>verify</goal>
- </goals>
- </execution>
- </executions>
- </plugin>
- </plugins>
- </build>
-</project>
diff --git
a/test/e2e/e2e-test/kong/src/test/java/org/apache/skywalking/e2e/DataAssertITCase.java
b/test/e2e/e2e-test/kong/src/test/java/org/apache/skywalking/e2e/DataAssertITCase.java
deleted file mode 100644
index 425230b..0000000
---
a/test/e2e/e2e-test/kong/src/test/java/org/apache/skywalking/e2e/DataAssertITCase.java
+++ /dev/null
@@ -1,149 +0,0 @@
-/*
- * Licensed to the Apache Software Foundation (ASF) under one or more
- * contributor license agreements. See the NOTICE file distributed with
- * this work for additional information regarding copyright ownership.
- * The ASF licenses this file to You under the Apache License, Version 2.0
- * (the "License"); you may not use this file except in compliance with
- * the License. You may obtain a copy of the License at
- *
- * http://www.apache.org/licenses/LICENSE-2.0
- *
- * Unless required by applicable law or agreed to in writing, software
- * distributed under the License is distributed on an "AS IS" BASIS,
- * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- * See the License for the specific language governing permissions and
- * limitations under the License.
- *
- */
-
-package org.apache.skywalking.e2e;
-
-import com.google.common.collect.Lists;
-import java.io.IOException;
-import java.io.InputStream;
-import java.util.List;
-import java.util.concurrent.TimeUnit;
-import org.apache.http.client.entity.UrlEncodedFormEntity;
-import org.apache.http.client.methods.CloseableHttpResponse;
-import org.apache.http.client.methods.HttpGet;
-import org.apache.http.client.methods.HttpPost;
-import org.apache.http.entity.InputStreamEntity;
-import org.apache.http.impl.client.CloseableHttpClient;
-import org.apache.http.impl.client.HttpClientBuilder;
-import org.apache.http.message.BasicNameValuePair;
-import org.junit.After;
-import org.junit.Assert;
-import org.junit.Before;
-import org.junit.Test;
-
-public class DataAssertITCase {
- private CloseableHttpClient client = HttpClientBuilder.create().build();
- private static final int MAX_RETRY_TIMES = 5;
- private String collectorBaseURL;
- private String serviceEntry;
- private String collectorInBaseURL;
-
- private String kongAdminBaseUrl;
-
- @Before
- public void setup() throws IOException {
- serviceEntry = System.getProperty("service.entry");
- collectorBaseURL = System.getProperty("collector.baseURL");
- collectorInBaseURL = System.getProperty("collector.in.baseURL");
-
- kongAdminBaseUrl = System.getProperty("kong.admin.baseURL");
- try (CloseableHttpResponse response = client.execute(new
HttpGet(kongAdminBaseUrl))) {
- Assert.assertEquals(200, response.getStatusLine().getStatusCode());
- }
- createService();
- addRouteForService();
- enablePlugin();
- }
-
- @Test(timeout = 180_000)
- public void verify() throws IOException, InterruptedException {
- int times = 0;
-
- do {
- TimeUnit.SECONDS.sleep(2L); // Wait Nginx Lua Agent available.
-
- try (CloseableHttpResponse response = client.execute(new
HttpGet(collectorBaseURL + "/status"))) {
- if (response.getStatusLine().getStatusCode() == 200) {
- break;
- }
- }
- }
- while (++times <= MAX_RETRY_TIMES);
-
- TimeUnit.SECONDS.sleep(3L);
- try (CloseableHttpResponse response = client.execute(new
HttpGet(serviceEntry))) {
- final int statusCode = response.getStatusLine().getStatusCode();
- Assert.assertTrue(statusCode >= 200 && statusCode <= 400);
- }
-
- times = 0;
- do {
- TimeUnit.SECONDS.sleep(5L); // Wait Agent reported TraceSegment.
-
- HttpPost post = new HttpPost(collectorBaseURL + "/dataValidate");
- InputStream input =
DataAssertITCase.class.getResourceAsStream("/expectedData.yaml");
- post.setEntity(new InputStreamEntity(input));
- try (CloseableHttpResponse response = client.execute(post)) {
- if (response.getStatusLine().getStatusCode() == 200) {
- break;
- }
- }
- post.abort();
- }
- while (++times <= MAX_RETRY_TIMES);
-
- Assert.assertTrue("Test failed.", times <= MAX_RETRY_TIMES);
- }
-
- private void createService() throws IOException {
- HttpPost post = new HttpPost(kongAdminBaseUrl + "/services");
- List<BasicNameValuePair> basicNameValuePairs = Lists.newArrayList(
- new BasicNameValuePair("name", "example-service"),
- new BasicNameValuePair("url", "http://mockbin.org";)
- );
- UrlEncodedFormEntity entity = new
UrlEncodedFormEntity(basicNameValuePairs);
- post.setEntity(entity);
- try (CloseableHttpResponse response = client.execute(post)) {
- Assert.assertEquals(201, response.getStatusLine().getStatusCode());
- }
- }
-
- private void addRouteForService() throws IOException {
- HttpPost post = new HttpPost(kongAdminBaseUrl +
"/services/example-service/routes");
- List<BasicNameValuePair> basicNameValuePairs = Lists.newArrayList(
- new BasicNameValuePair("name", "mocking"),
- new BasicNameValuePair("paths[]", "/mock")
- );
- UrlEncodedFormEntity entity = new
UrlEncodedFormEntity(basicNameValuePairs);
- post.setEntity(entity);
- try (CloseableHttpResponse response = client.execute(post)) {
- Assert.assertEquals(201, response.getStatusLine().getStatusCode());
- }
- }
-
- private void enablePlugin() throws IOException {
- HttpPost post = new HttpPost(kongAdminBaseUrl + "/plugins");
- List<BasicNameValuePair> basicNameValuePairs = Lists.newArrayList(
- new BasicNameValuePair("name", "skywalking"),
- new BasicNameValuePair("config.backend_http_uri",
collectorInBaseURL),
- new BasicNameValuePair("config.service_name", "kong"),
- new BasicNameValuePair("config.service_instance_name",
"kong-with-skywalking"),
- new BasicNameValuePair("config.sample_ratio", "100")
- );
- UrlEncodedFormEntity entity = new
UrlEncodedFormEntity(basicNameValuePairs);
- post.setEntity(entity);
- try (CloseableHttpResponse response = client.execute(post)) {
- Assert.assertEquals(201, response.getStatusLine().getStatusCode());
- }
- }
-
- @After
- public void cleanup() throws IOException {
- client.close();
- }
-}
diff --git a/test/e2e/e2e-test/kong/src/test/resources/expectedData.yaml
b/test/e2e/e2e-test/kong/src/test/resources/expectedData.yaml
deleted file mode 100644
index 19c9bd8..0000000
--- a/test/e2e/e2e-test/kong/src/test/resources/expectedData.yaml
+++ /dev/null
@@ -1,61 +0,0 @@
-# Licensed to the Apache Software Foundation (ASF) under one
-# or more contributor license agreements. See the NOTICE file
-# distributed with this work for additional information
-# regarding copyright ownership. The ASF licenses this file
-# to you under the Apache License, Version 2.0 (the
-# "License"); you may not use this file except in compliance
-# with the License. You may obtain a copy of the License at
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-segmentItems:
-- serviceName: kong
- segmentSize: eq 1
- segments:
- - segmentId: not null
- spans:
- - operationName: "/mock"
- parentSpanId: 0
- spanId: 1
- spanLayer: Http
- tags:
- - key: http.status
- value: '200'
- startTime: gt 0
- endTime: gt 0
- componentId: 6001
- spanType: Exit
- peer: localhost
- skipAnalysis: false
- - operationName: "/mock"
- parentSpanId: -1
- spanId: 0
- spanLayer: Http
- tags:
- - key: http.method
- value: GET
- - key: http.params
- value: http://localhost/mock
- - key: kong.node
- value: not null
- - key: kong.service
- value: not null
- - key: kong.route
- value: not null
- - key: kong.service_name
- value: example-service
- - key: http.status
- value: '200'
- startTime: gt 0
- endTime: gt 0
- componentId: 6001
- spanType: Entry
- peer: ''
- skipAnalysis: false
-
diff --git a/test/e2e/e2e-test/pom.xml b/test/e2e/e2e-test/pom.xml
index bc5ae89..5910793 100644
--- a/test/e2e/e2e-test/pom.xml
+++ b/test/e2e/e2e-test/pom.xml
@@ -36,7 +36,6 @@
<modules>
<module>nginx</module>
- <module>kong</module>
</modules>
<properties>
