github-actions[bot] commented on PR #5878: URL: https://github.com/apache/texera/pull/5878#issuecomment-4763895384
<!-- texera-benchmarks-comment --> ## ⚠️ Benchmark changes need a look 🟢 0 better · 🔴 4 worse · ⚪ 11 noise (<±5%) · 0 without baseline > Compared against main `ed22158` benchmarked on **this same runner**, so the delta is largely free of cross-runner hardware noise. The "7d avg" column still reflects the gh-pages dashboard. Treat <±5% as noise unless repeated. [Dashboard](https://apache.github.io/texera/dev/bench/) · [Run](https://github.com/apache/texera/actions/runs/27923256441) | | config | throughput | MB/s | latency | max Δ latest / 7d | |---|---|---:|---:|---:|---:| | 🔴 | bs=10 sw=10 sl=64 | 380 | 0.232 | 25,837/41,878/41,878 us | 🔴 +29.3% / 🔴 +19.7% | | ⚪ | bs=100 sw=10 sl=64 | 820 | 0.501 | 120,896/138,510/138,510 us | ⚪ within ±5% / 🔴 -8.1% | | ⚪ | bs=1000 sw=10 sl=64 | 915 | 0.558 | 1,087,528/1,154,907/1,154,907 us | ⚪ within ±5% / 🔴 +12.9% | <details><summary>Baseline details</summary> Latest main `ed22158` from same runner | config | metric | PR | latest main | 7d avg | Δ latest | Δ 7d | |---|---|---:|---:|---:|---:|---:| | bs=10 sw=10 sl=64 | throughput | 380 tuples/sec | 419 tuples/sec | 410.82 tuples/sec | -9.3% | -7.5% | | bs=10 sw=10 sl=64 | MB/s | 0.232 MB/s | 0.256 MB/s | 0.251 MB/s | -9.4% | -7.5% | | bs=10 sw=10 sl=64 | p50 | 25,837 us | 24,827 us | 23,785 us | +4.1% | +8.6% | | bs=10 sw=10 sl=64 | p95 | 41,878 us | 32,377 us | 34,980 us | +29.3% | +19.7% | | bs=10 sw=10 sl=64 | p99 | 41,878 us | 32,377 us | 34,980 us | +29.3% | +19.7% | | bs=100 sw=10 sl=64 | throughput | 820 tuples/sec | 851 tuples/sec | 891.94 tuples/sec | -3.6% | -8.1% | | bs=100 sw=10 sl=64 | MB/s | 0.501 MB/s | 0.52 MB/s | 0.544 MB/s | -3.7% | -8.0% | | bs=100 sw=10 sl=64 | p50 | 120,896 us | 115,752 us | 112,277 us | +4.4% | +7.7% | | bs=100 sw=10 sl=64 | p95 | 138,510 us | 132,279 us | 139,802 us | +4.7% | -0.9% | | bs=100 sw=10 sl=64 | p99 | 138,510 us | 132,279 us | 139,802 us | +4.7% | -0.9% | | bs=1000 sw=10 sl=64 | throughput | 915 tuples/sec | 934 tuples/sec | 1,041 tuples/sec | -2.0% | -12.1% | | bs=1000 sw=10 sl=64 | MB/s | 0.558 MB/s | 0.57 MB/s | 0.635 MB/s | -2.1% | -12.2% | | bs=1000 sw=10 sl=64 | p50 | 1,087,528 us | 1,068,671 us | 972,714 us | +1.8% | +11.8% | | bs=1000 sw=10 sl=64 | p95 | 1,154,907 us | 1,105,325 us | 1,023,057 us | +4.5% | +12.9% | | bs=1000 sw=10 sl=64 | p99 | 1,154,907 us | 1,105,325 us | 1,023,057 us | +4.5% | +12.9% | </details> <details><summary>Raw CSV</summary> ```csv config_idx,batch_size,schema_width,string_len,num_batches,total_ms,total_tuples,total_bytes,tuples_per_sec,mb_per_sec,lat_p50_us,lat_p95_us,lat_p99_us 0,10,10,64,20,526.26,200,128000,380,0.232,25837.32,41878.25,41878.25 1,100,10,64,20,2438.01,2000,1280000,820,0.501,120896.26,138509.51,138509.51 2,1000,10,64,20,21858.89,20000,12800000,915,0.558,1087528.38,1154906.64,1154906.64 ``` </details> -- This is an automated message from the Apache Git Service. To respond to the message, please log on to GitHub and use the URL above to go to the specific comment. To unsubscribe, e-mail: [email protected] For queries about this service, please contact Infrastructure at: [email protected]
