github-actions[bot] commented on PR #6128: URL: https://github.com/apache/texera/pull/6128#issuecomment-4884456119
<!-- texera-benchmarks-comment --> ## ⚠️ Benchmark changes need a look 🟢 0 better · 🔴 6 worse · ⚪ 9 noise (<±5%) · 0 without baseline > Compared against main `3a12e62` benchmarked on **this same runner**, so the delta is largely free of cross-runner hardware noise. The "7d avg" column still reflects the gh-pages dashboard. Treat <±5% as noise unless repeated. [Dashboard](https://apache.github.io/texera/dev/bench/) · [Run](https://github.com/apache/texera/actions/runs/28726022769) | | config | throughput | MB/s | latency | max Δ latest / 7d | |---|---|---:|---:|---:|---:| | 🔴 | bs=10 sw=10 sl=64 | 382 | 0.233 | 24,358/40,020/40,020 us | 🔴 +43.0% / 🔴 +164.3% | | 🔴 | bs=100 sw=10 sl=64 | 799 | 0.488 | 123,648/139,289/139,289 us | 🔴 +5.2% / 🔴 +29.0% | | ⚪ | bs=1000 sw=10 sl=64 | 927 | 0.566 | 1,079,514/1,103,068/1,103,068 us | ⚪ within ±5% / 🔴 +9.1% | <details><summary>Baseline details</summary> Latest main `3a12e62` from same runner | config | metric | PR | latest main | 7d avg | Δ latest | Δ 7d | |---|---|---:|---:|---:|---:|---:| | bs=10 sw=10 sl=64 | throughput | 382 tuples/sec | 443 tuples/sec | 776.36 tuples/sec | -13.8% | -50.8% | | bs=10 sw=10 sl=64 | MB/s | 0.233 MB/s | 0.27 MB/s | 0.474 MB/s | -13.7% | -50.8% | | bs=10 sw=10 sl=64 | p50 | 24,358 us | 23,287 us | 12,636 us | +4.6% | +92.8% | | bs=10 sw=10 sl=64 | p95 | 40,020 us | 27,981 us | 15,143 us | +43.0% | +164.3% | | bs=10 sw=10 sl=64 | p99 | 40,020 us | 27,981 us | 18,954 us | +43.0% | +111.1% | | bs=100 sw=10 sl=64 | throughput | 799 tuples/sec | 841 tuples/sec | 985.33 tuples/sec | -5.0% | -18.9% | | bs=100 sw=10 sl=64 | MB/s | 0.488 MB/s | 0.514 MB/s | 0.601 MB/s | -5.1% | -18.9% | | bs=100 sw=10 sl=64 | p50 | 123,648 us | 117,545 us | 101,671 us | +5.2% | +21.6% | | bs=100 sw=10 sl=64 | p95 | 139,289 us | 141,225 us | 107,939 us | -1.4% | +29.0% | | bs=100 sw=10 sl=64 | p99 | 139,289 us | 141,225 us | 113,798 us | -1.4% | +22.4% | | bs=1000 sw=10 sl=64 | throughput | 927 tuples/sec | 921 tuples/sec | 1,016 tuples/sec | +0.7% | -8.8% | | bs=1000 sw=10 sl=64 | MB/s | 0.566 MB/s | 0.562 MB/s | 0.62 MB/s | +0.7% | -8.8% | | bs=1000 sw=10 sl=64 | p50 | 1,079,514 us | 1,084,426 us | 989,693 us | -0.5% | +9.1% | | bs=1000 sw=10 sl=64 | p95 | 1,103,068 us | 1,149,963 us | 1,028,327 us | -4.1% | +7.3% | | bs=1000 sw=10 sl=64 | p99 | 1,103,068 us | 1,149,963 us | 1,059,969 us | -4.1% | +4.1% | </details> <details><summary>Raw CSV</summary> ```csv config_idx,batch_size,schema_width,string_len,num_batches,total_ms,total_tuples,total_bytes,tuples_per_sec,mb_per_sec,lat_p50_us,lat_p95_us,lat_p99_us 0,10,10,64,20,523.15,200,128000,382,0.233,24358.42,40020.35,40020.35 1,100,10,64,20,2502.52,2000,1280000,799,0.488,123648.29,139288.90,139288.90 2,1000,10,64,20,21586.04,20000,12800000,927,0.566,1079513.75,1103067.94,1103067.94 ``` </details> -- This is an automated message from the Apache Git Service. To respond to the message, please log on to GitHub and use the URL above to go to the specific comment. To unsubscribe, e-mail: [email protected] For queries about this service, please contact Infrastructure at: [email protected]
