github-actions[bot] commented on PR #6639: URL: https://github.com/apache/texera/pull/6639#issuecomment-5027536037
<!-- texera-benchmarks-comment --> ## ⚠️ Benchmark changes need a look 🟢 0 better · 🔴 5 worse · ⚪ 10 noise (<±5%) · 0 without baseline > Compared against main `f14cd39` benchmarked on **this same runner**, so the delta is largely free of cross-runner hardware noise. The "7d avg" column still reflects the gh-pages dashboard. Treat <±5% as noise unless repeated. [Dashboard](https://apache.github.io/texera/dev/bench/) · [Run](https://github.com/apache/texera/actions/runs/29780564341) | | config | throughput | MB/s | latency | max Δ latest / 7d | |---|---|---:|---:|---:|---:| | 🔴 | bs=10 sw=10 sl=64 | 428 | 0.261 | 22,984/30,046/30,046 us | 🔴 -10.3% / 🔴 +92.2% | | ⚪ | bs=100 sw=10 sl=64 | 927 | 0.566 | 104,645/133,184/133,184 us | ⚪ within ±5% / 🔴 +25.6% | | 🔴 | bs=1000 sw=10 sl=64 | 1,067 | 0.651 | 931,596/1,060,998/1,060,998 us | 🔴 +12.3% / ⚪ within ±5% | <details><summary>Baseline details</summary> Latest main `f14cd39` from same runner | config | metric | PR | latest main | 7d avg | Δ latest | Δ 7d | |---|---|---:|---:|---:|---:|---:| | bs=10 sw=10 sl=64 | throughput | 428 tuples/sec | 477 tuples/sec | 767.23 tuples/sec | -10.3% | -44.2% | | bs=10 sw=10 sl=64 | MB/s | 0.261 MB/s | 0.291 MB/s | 0.468 MB/s | -10.3% | -44.3% | | bs=10 sw=10 sl=64 | p50 | 22,984 us | 20,926 us | 12,705 us | +9.8% | +80.9% | | bs=10 sw=10 sl=64 | p95 | 30,046 us | 28,946 us | 15,633 us | +3.8% | +92.2% | | bs=10 sw=10 sl=64 | p99 | 30,046 us | 28,946 us | 20,214 us | +3.8% | +48.6% | | bs=100 sw=10 sl=64 | throughput | 927 tuples/sec | 954 tuples/sec | 1,001 tuples/sec | -2.8% | -7.4% | | bs=100 sw=10 sl=64 | MB/s | 0.566 MB/s | 0.583 MB/s | 0.611 MB/s | -2.9% | -7.4% | | bs=100 sw=10 sl=64 | p50 | 104,645 us | 104,080 us | 99,949 us | +0.5% | +4.7% | | bs=100 sw=10 sl=64 | p95 | 133,184 us | 133,436 us | 105,996 us | -0.2% | +25.6% | | bs=100 sw=10 sl=64 | p99 | 133,184 us | 133,436 us | 117,999 us | -0.2% | +12.9% | | bs=1000 sw=10 sl=64 | throughput | 1,067 tuples/sec | 1,102 tuples/sec | 1,033 tuples/sec | -3.2% | +3.3% | | bs=1000 sw=10 sl=64 | MB/s | 0.651 MB/s | 0.672 MB/s | 0.631 MB/s | -3.1% | +3.2% | | bs=1000 sw=10 sl=64 | p50 | 931,596 us | 914,920 us | 974,571 us | +1.8% | -4.4% | | bs=1000 sw=10 sl=64 | p95 | 1,060,998 us | 944,444 us | 1,016,467 us | +12.3% | +4.4% | | bs=1000 sw=10 sl=64 | p99 | 1,060,998 us | 944,444 us | 1,048,798 us | +12.3% | +1.2% | </details> <details><summary>Raw CSV</summary> ```csv config_idx,batch_size,schema_width,string_len,num_batches,total_ms,total_tuples,total_bytes,tuples_per_sec,mb_per_sec,lat_p50_us,lat_p95_us,lat_p99_us 0,10,10,64,20,467.80,200,128000,428,0.261,22983.68,30046.08,30046.08 1,100,10,64,20,2158.50,2000,1280000,927,0.566,104645.14,133184.08,133184.08 2,1000,10,64,20,18748.17,20000,12800000,1067,0.651,931596.12,1060998.45,1060998.45 ``` </details> -- This is an automated message from the Apache Git Service. To respond to the message, please log on to GitHub and use the URL above to go to the specific comment. To unsubscribe, e-mail: [email protected] For queries about this service, please contact Infrastructure at: [email protected]
