github-actions[bot] commented on PR #6867: URL: https://github.com/apache/texera/pull/6867#issuecomment-5074488286
<!-- texera-benchmarks-comment --> ## ⚠️ Benchmark changes need a look 🟢 0 better · 🔴 2 worse · ⚪ 13 noise (<±5%) · 0 without baseline > Compared against main `f02dd2f` benchmarked on **this same runner**, so the delta is largely free of cross-runner hardware noise. The "7d avg" column still reflects the gh-pages dashboard. Treat <±5% as noise unless repeated. [Dashboard](https://apache.github.io/texera/dev/bench/) · [Run](https://github.com/apache/texera/actions/runs/30126815506) | | config | throughput | MB/s | latency | max Δ latest / 7d | |---|---|---:|---:|---:|---:| | ⚪ | bs=10 sw=10 sl=64 | 416 | 0.254 | 23,230/33,095/33,095 us | ⚪ within ±5% / 🔴 +99.4% | | ⚪ | bs=100 sw=10 sl=64 | 922 | 0.563 | 106,855/161,430/161,430 us | ⚪ within ±5% / 🔴 +48.0% | | 🔴 | bs=1000 sw=10 sl=64 | 1,103 | 0.673 | 906,421/1,019,048/1,019,048 us | 🔴 +7.2% / 🟢 +9.9% | <details><summary>Baseline details</summary> Latest main `f02dd2f` from same runner | config | metric | PR | latest main | 7d avg | Δ latest | Δ 7d | |---|---|---:|---:|---:|---:|---:| | bs=10 sw=10 sl=64 | throughput | 416 tuples/sec | 418 tuples/sec | 754.55 tuples/sec | -0.5% | -44.9% | | bs=10 sw=10 sl=64 | MB/s | 0.254 MB/s | 0.255 MB/s | 0.461 MB/s | -0.4% | -44.8% | | bs=10 sw=10 sl=64 | p50 | 23,230 us | 23,819 us | 12,816 us | -2.5% | +81.3% | | bs=10 sw=10 sl=64 | p95 | 33,095 us | 33,030 us | 16,594 us | +0.2% | +99.4% | | bs=10 sw=10 sl=64 | p99 | 33,095 us | 33,030 us | 19,806 us | +0.2% | +67.1% | | bs=100 sw=10 sl=64 | throughput | 922 tuples/sec | 907 tuples/sec | 969.38 tuples/sec | +1.7% | -4.9% | | bs=100 sw=10 sl=64 | MB/s | 0.563 MB/s | 0.554 MB/s | 0.592 MB/s | +1.6% | -4.8% | | bs=100 sw=10 sl=64 | p50 | 106,855 us | 104,703 us | 103,584 us | +2.1% | +3.2% | | bs=100 sw=10 sl=64 | p95 | 161,430 us | 161,864 us | 109,097 us | -0.3% | +48.0% | | bs=100 sw=10 sl=64 | p99 | 161,430 us | 161,864 us | 117,304 us | -0.3% | +37.6% | | bs=1000 sw=10 sl=64 | throughput | 1,103 tuples/sec | 1,098 tuples/sec | 1,004 tuples/sec | +0.5% | +9.9% | | bs=1000 sw=10 sl=64 | MB/s | 0.673 MB/s | 0.67 MB/s | 0.613 MB/s | +0.4% | +9.9% | | bs=1000 sw=10 sl=64 | p50 | 906,421 us | 913,375 us | 1,002,357 us | -0.8% | -9.6% | | bs=1000 sw=10 sl=64 | p95 | 1,019,048 us | 950,540 us | 1,046,463 us | +7.2% | -2.6% | | bs=1000 sw=10 sl=64 | p99 | 1,019,048 us | 950,540 us | 1,073,661 us | +7.2% | -5.1% | </details> <details><summary>Raw CSV</summary> ```csv config_idx,batch_size,schema_width,string_len,num_batches,total_ms,total_tuples,total_bytes,tuples_per_sec,mb_per_sec,lat_p50_us,lat_p95_us,lat_p99_us 0,10,10,64,20,481.23,200,128000,416,0.254,23229.80,33094.60,33094.60 1,100,10,64,20,2168.41,2000,1280000,922,0.563,106855.43,161429.50,161429.50 2,1000,10,64,20,18126.61,20000,12800000,1103,0.673,906421.08,1019048.21,1019048.21 ``` </details> -- This is an automated message from the Apache Git Service. To respond to the message, please log on to GitHub and use the URL above to go to the specific comment. To unsubscribe, e-mail: [email protected] For queries about this service, please contact Infrastructure at: [email protected]
