github-actions[bot] commented on PR #6868: URL: https://github.com/apache/texera/pull/6868#issuecomment-5074521729
<!-- texera-benchmarks-comment --> ## ⚠️ Benchmark changes need a look 🟢 0 better · 🔴 7 worse · ⚪ 8 noise (<±5%) · 0 without baseline > Compared against main `f02dd2f` benchmarked on **this same runner**, so the delta is largely free of cross-runner hardware noise. The "7d avg" column still reflects the gh-pages dashboard. Treat <±5% as noise unless repeated. [Dashboard](https://apache.github.io/texera/dev/bench/) · [Run](https://github.com/apache/texera/actions/runs/30126989506) | | config | throughput | MB/s | latency | max Δ latest / 7d | |---|---|---:|---:|---:|---:| | 🔴 | bs=10 sw=10 sl=64 | 363 | 0.221 | 26,533/39,422/39,422 us | 🔴 +21.9% / 🔴 +137.6% | | ⚪ | bs=100 sw=10 sl=64 | 786 | 0.48 | 126,402/153,171/153,171 us | ⚪ within ±5% / 🔴 +40.4% | | 🔴 | bs=1000 sw=10 sl=64 | 880 | 0.537 | 1,134,597/1,227,642/1,227,642 us | 🔴 +5.1% / 🔴 +17.3% | <details><summary>Baseline details</summary> Latest main `f02dd2f` from same runner | config | metric | PR | latest main | 7d avg | Δ latest | Δ 7d | |---|---|---:|---:|---:|---:|---:| | bs=10 sw=10 sl=64 | throughput | 363 tuples/sec | 412 tuples/sec | 754.55 tuples/sec | -11.9% | -51.9% | | bs=10 sw=10 sl=64 | MB/s | 0.221 MB/s | 0.251 MB/s | 0.461 MB/s | -12.0% | -52.0% | | bs=10 sw=10 sl=64 | p50 | 26,533 us | 23,438 us | 12,816 us | +13.2% | +107.0% | | bs=10 sw=10 sl=64 | p95 | 39,422 us | 32,347 us | 16,594 us | +21.9% | +137.6% | | bs=10 sw=10 sl=64 | p99 | 39,422 us | 32,347 us | 19,806 us | +21.9% | +99.0% | | bs=100 sw=10 sl=64 | throughput | 786 tuples/sec | 810 tuples/sec | 969.38 tuples/sec | -3.0% | -18.9% | | bs=100 sw=10 sl=64 | MB/s | 0.48 MB/s | 0.494 MB/s | 0.592 MB/s | -2.8% | -18.9% | | bs=100 sw=10 sl=64 | p50 | 126,402 us | 123,870 us | 103,584 us | +2.0% | +22.0% | | bs=100 sw=10 sl=64 | p95 | 153,171 us | 158,888 us | 109,097 us | -3.6% | +40.4% | | bs=100 sw=10 sl=64 | p99 | 153,171 us | 158,888 us | 117,304 us | -3.6% | +30.6% | | bs=1000 sw=10 sl=64 | throughput | 880 tuples/sec | 918 tuples/sec | 1,004 tuples/sec | -4.1% | -12.3% | | bs=1000 sw=10 sl=64 | MB/s | 0.537 MB/s | 0.56 MB/s | 0.613 MB/s | -4.1% | -12.3% | | bs=1000 sw=10 sl=64 | p50 | 1,134,597 us | 1,085,772 us | 1,002,357 us | +4.5% | +13.2% | | bs=1000 sw=10 sl=64 | p95 | 1,227,642 us | 1,168,099 us | 1,046,463 us | +5.1% | +17.3% | | bs=1000 sw=10 sl=64 | p99 | 1,227,642 us | 1,168,099 us | 1,073,661 us | +5.1% | +14.3% | </details> <details><summary>Raw CSV</summary> ```csv config_idx,batch_size,schema_width,string_len,num_batches,total_ms,total_tuples,total_bytes,tuples_per_sec,mb_per_sec,lat_p50_us,lat_p95_us,lat_p99_us 0,10,10,64,20,551.58,200,128000,363,0.221,26532.66,39422.21,39422.21 1,100,10,64,20,2544.69,2000,1280000,786,0.480,126402.42,153170.57,153170.57 2,1000,10,64,20,22728.69,20000,12800000,880,0.537,1134597.35,1227642.04,1227642.04 ``` </details> -- This is an automated message from the Apache Git Service. To respond to the message, please log on to GitHub and use the URL above to go to the specific comment. To unsubscribe, e-mail: [email protected] For queries about this service, please contact Infrastructure at: [email protected]
