github-actions[bot] commented on PR #6883: URL: https://github.com/apache/texera/pull/6883#issuecomment-5076838003
<!-- texera-benchmarks-comment --> ## ⚠️ Benchmark changes need a look 🟢 2 better · 🔴 5 worse · ⚪ 8 noise (<±5%) · 0 without baseline > Compared against main `429be11` benchmarked on **this same runner**, so the delta is largely free of cross-runner hardware noise. The "7d avg" column still reflects the gh-pages dashboard. Treat <±5% as noise unless repeated. [Dashboard](https://apache.github.io/texera/dev/bench/) · [Run](https://github.com/apache/texera/actions/runs/30143170513) | | config | throughput | MB/s | latency | max Δ latest / 7d | |---|---|---:|---:|---:|---:| | 🔴 | bs=10 sw=10 sl=64 | 386 | 0.236 | 25,449/38,111/38,111 us | 🔴 +16.1% / 🔴 +129.7% | | 🟢 | bs=100 sw=10 sl=64 | 812 | 0.496 | 122,903/135,458/135,458 us | 🟢 -7.7% / 🔴 +24.2% | | ⚪ | bs=1000 sw=10 sl=64 | 927 | 0.566 | 1,078,505/1,110,270/1,110,270 us | ⚪ within ±5% / 🔴 -7.6% | <details><summary>Baseline details</summary> Latest main `429be11` from same runner | config | metric | PR | latest main | 7d avg | Δ latest | Δ 7d | |---|---|---:|---:|---:|---:|---:| | bs=10 sw=10 sl=64 | throughput | 386 tuples/sec | 415 tuples/sec | 754.55 tuples/sec | -7.0% | -48.8% | | bs=10 sw=10 sl=64 | MB/s | 0.236 MB/s | 0.253 MB/s | 0.461 MB/s | -6.7% | -48.8% | | bs=10 sw=10 sl=64 | p50 | 25,449 us | 21,928 us | 12,816 us | +16.1% | +98.6% | | bs=10 sw=10 sl=64 | p95 | 38,111 us | 35,758 us | 16,594 us | +6.6% | +129.7% | | bs=10 sw=10 sl=64 | p99 | 38,111 us | 35,758 us | 19,806 us | +6.6% | +92.4% | | bs=100 sw=10 sl=64 | throughput | 812 tuples/sec | 824 tuples/sec | 969.38 tuples/sec | -1.5% | -16.2% | | bs=100 sw=10 sl=64 | MB/s | 0.496 MB/s | 0.503 MB/s | 0.592 MB/s | -1.4% | -16.2% | | bs=100 sw=10 sl=64 | p50 | 122,903 us | 118,263 us | 103,584 us | +3.9% | +18.7% | | bs=100 sw=10 sl=64 | p95 | 135,458 us | 146,783 us | 109,097 us | -7.7% | +24.2% | | bs=100 sw=10 sl=64 | p99 | 135,458 us | 146,783 us | 117,304 us | -7.7% | +15.5% | | bs=1000 sw=10 sl=64 | throughput | 927 tuples/sec | 927 tuples/sec | 1,004 tuples/sec | 0.0% | -7.6% | | bs=1000 sw=10 sl=64 | MB/s | 0.566 MB/s | 0.566 MB/s | 0.613 MB/s | 0.0% | -7.6% | | bs=1000 sw=10 sl=64 | p50 | 1,078,505 us | 1,083,570 us | 1,002,357 us | -0.5% | +7.6% | | bs=1000 sw=10 sl=64 | p95 | 1,110,270 us | 1,106,302 us | 1,046,463 us | +0.4% | +6.1% | | bs=1000 sw=10 sl=64 | p99 | 1,110,270 us | 1,106,302 us | 1,073,661 us | +0.4% | +3.4% | </details> <details><summary>Raw CSV</summary> ```csv config_idx,batch_size,schema_width,string_len,num_batches,total_ms,total_tuples,total_bytes,tuples_per_sec,mb_per_sec,lat_p50_us,lat_p95_us,lat_p99_us 0,10,10,64,20,517.87,200,128000,386,0.236,25449.17,38110.58,38110.58 1,100,10,64,20,2461.84,2000,1280000,812,0.496,122903.48,135457.52,135457.52 2,1000,10,64,20,21572.92,20000,12800000,927,0.566,1078505.47,1110269.63,1110269.63 ``` </details> -- This is an automated message from the Apache Git Service. To respond to the message, please log on to GitHub and use the URL above to go to the specific comment. To unsubscribe, e-mail: [email protected] For queries about this service, please contact Infrastructure at: [email protected]
