github-actions[bot] commented on PR #7240: URL: https://github.com/apache/texera/pull/7240#issuecomment-5150603569
<!-- texera-benchmarks-comment --> ## ⚠️ Benchmark changes need a look 🟢 4 better · 🔴 1 worse · ⚪ 10 noise (<±5%) · 0 without baseline > Compared against main `19a35b7` benchmarked on **this same runner**, so the delta is largely free of cross-runner hardware noise. The "7d avg" column still reflects the gh-pages dashboard. Treat <±5% as noise unless repeated. [Dashboard](https://apache.github.io/texera/dev/bench/) · [Run](https://github.com/apache/texera/actions/runs/30691465388) | | config | throughput | MB/s | latency | max Δ latest / 7d | |---|---|---:|---:|---:|---:| | 🟢 | bs=10 sw=10 sl=64 | 409 | 0.249 | 23,834/30,675/30,675 us | 🟢 -15.1% / 🔴 +89.4% | | 🔴 | bs=100 sw=10 sl=64 | 827 | 0.505 | 119,869/140,519/140,519 us | 🟢 -6.1% / 🔴 +26.8% | | ⚪ | bs=1000 sw=10 sl=64 | 939 | 0.573 | 1,066,490/1,114,962/1,114,962 us | ⚪ within ±5% / 🔴 -5.4% | <details><summary>Baseline details</summary> Latest main `19a35b7` from same runner | config | metric | PR | latest main | 7d avg | Δ latest | Δ 7d | |---|---|---:|---:|---:|---:|---:| | bs=10 sw=10 sl=64 | throughput | 409 tuples/sec | 418 tuples/sec | 765.25 tuples/sec | -2.2% | -46.6% | | bs=10 sw=10 sl=64 | MB/s | 0.249 MB/s | 0.255 MB/s | 0.467 MB/s | -2.4% | -46.7% | | bs=10 sw=10 sl=64 | p50 | 23,834 us | 22,888 us | 12,703 us | +4.1% | +87.6% | | bs=10 sw=10 sl=64 | p95 | 30,675 us | 36,125 us | 16,199 us | -15.1% | +89.4% | | bs=10 sw=10 sl=64 | p99 | 30,675 us | 36,125 us | 19,557 us | -15.1% | +56.9% | | bs=100 sw=10 sl=64 | throughput | 827 tuples/sec | 841 tuples/sec | 965.22 tuples/sec | -1.7% | -14.3% | | bs=100 sw=10 sl=64 | MB/s | 0.505 MB/s | 0.513 MB/s | 0.589 MB/s | -1.6% | -14.3% | | bs=100 sw=10 sl=64 | p50 | 119,869 us | 113,808 us | 103,830 us | +5.3% | +15.4% | | bs=100 sw=10 sl=64 | p95 | 140,519 us | 149,713 us | 110,778 us | -6.1% | +26.8% | | bs=100 sw=10 sl=64 | p99 | 140,519 us | 149,713 us | 118,713 us | -6.1% | +18.4% | | bs=1000 sw=10 sl=64 | throughput | 939 tuples/sec | 950 tuples/sec | 992.33 tuples/sec | -1.2% | -5.4% | | bs=1000 sw=10 sl=64 | MB/s | 0.573 MB/s | 0.58 MB/s | 0.606 MB/s | -1.2% | -5.4% | | bs=1000 sw=10 sl=64 | p50 | 1,066,490 us | 1,048,272 us | 1,016,959 us | +1.7% | +4.9% | | bs=1000 sw=10 sl=64 | p95 | 1,114,962 us | 1,088,706 us | 1,062,501 us | +2.4% | +4.9% | | bs=1000 sw=10 sl=64 | p99 | 1,114,962 us | 1,088,706 us | 1,082,611 us | +2.4% | +3.0% | </details> <details><summary>Raw CSV</summary> ```csv config_idx,batch_size,schema_width,string_len,num_batches,total_ms,total_tuples,total_bytes,tuples_per_sec,mb_per_sec,lat_p50_us,lat_p95_us,lat_p99_us 0,10,10,64,20,489.54,200,128000,409,0.249,23833.54,30675.33,30675.33 1,100,10,64,20,2417.11,2000,1280000,827,0.505,119869.08,140519.10,140519.10 2,1000,10,64,20,21292.04,20000,12800000,939,0.573,1066490.03,1114961.60,1114961.60 ``` </details> -- This is an automated message from the Apache Git Service. To respond to the message, please log on to GitHub and use the URL above to go to the specific comment. To unsubscribe, e-mail: [email protected] For queries about this service, please contact Infrastructure at: [email protected]
