github-actions[bot] commented on PR #7273: URL: https://github.com/apache/texera/pull/7273#issuecomment-5161629003
<!-- texera-benchmarks-comment --> ## ⚠️ Benchmark changes need a look 🟢 2 better · 🔴 7 worse · ⚪ 6 noise (<±5%) · 0 without baseline > Compared against main `2538d6a` benchmarked on **this same runner**, so the delta is largely free of cross-runner hardware noise. The "7d avg" column still reflects the gh-pages dashboard. Treat <±5% as noise unless repeated. [Dashboard](https://apache.github.io/texera/dev/bench/) · [Run](https://github.com/apache/texera/actions/runs/30778610734) | | config | throughput | MB/s | latency | max Δ latest / 7d | |---|---|---:|---:|---:|---:| | 🔴 | bs=10 sw=10 sl=64 | 379 | 0.231 | 24,712/38,638/38,638 us | 🔴 +19.8% / 🔴 +151.1% | | 🟢 | bs=100 sw=10 sl=64 | 788 | 0.481 | 126,603/152,487/152,487 us | 🟢 -7.3% / 🔴 +44.0% | | 🔴 | bs=1000 sw=10 sl=64 | 908 | 0.554 | 1,090,607/1,234,156/1,234,156 us | 🔴 +7.7% / 🔴 +21.4% | <details><summary>Baseline details</summary> Latest main `2538d6a` from same runner | config | metric | PR | latest main | 7d avg | Δ latest | Δ 7d | |---|---|---:|---:|---:|---:|---:| | bs=10 sw=10 sl=64 | throughput | 379 tuples/sec | 400 tuples/sec | 790.88 tuples/sec | -5.3% | -52.1% | | bs=10 sw=10 sl=64 | MB/s | 0.231 MB/s | 0.244 MB/s | 0.483 MB/s | -5.3% | -52.1% | | bs=10 sw=10 sl=64 | p50 | 24,712 us | 20,634 us | 12,348 us | +19.8% | +100.1% | | bs=10 sw=10 sl=64 | p95 | 38,638 us | 35,901 us | 15,390 us | +7.6% | +151.1% | | bs=10 sw=10 sl=64 | p99 | 38,638 us | 35,901 us | 18,935 us | +7.6% | +104.1% | | bs=100 sw=10 sl=64 | throughput | 788 tuples/sec | 783 tuples/sec | 1,009 tuples/sec | +0.6% | -21.9% | | bs=100 sw=10 sl=64 | MB/s | 0.481 MB/s | 0.478 MB/s | 0.616 MB/s | +0.6% | -21.9% | | bs=100 sw=10 sl=64 | p50 | 126,603 us | 124,033 us | 99,753 us | +2.1% | +26.9% | | bs=100 sw=10 sl=64 | p95 | 152,487 us | 164,489 us | 105,895 us | -7.3% | +44.0% | | bs=100 sw=10 sl=64 | p99 | 152,487 us | 164,489 us | 113,263 us | -7.3% | +34.6% | | bs=1000 sw=10 sl=64 | throughput | 908 tuples/sec | 908 tuples/sec | 1,037 tuples/sec | 0.0% | -12.5% | | bs=1000 sw=10 sl=64 | MB/s | 0.554 MB/s | 0.554 MB/s | 0.633 MB/s | 0.0% | -12.5% | | bs=1000 sw=10 sl=64 | p50 | 1,090,607 us | 1,100,905 us | 976,194 us | -0.9% | +11.7% | | bs=1000 sw=10 sl=64 | p95 | 1,234,156 us | 1,146,367 us | 1,016,411 us | +7.7% | +21.4% | | bs=1000 sw=10 sl=64 | p99 | 1,234,156 us | 1,146,367 us | 1,045,212 us | +7.7% | +18.1% | </details> <details><summary>Raw CSV</summary> ```csv config_idx,batch_size,schema_width,string_len,num_batches,total_ms,total_tuples,total_bytes,tuples_per_sec,mb_per_sec,lat_p50_us,lat_p95_us,lat_p99_us 0,10,10,64,20,528.34,200,128000,379,0.231,24711.64,38637.67,38637.67 1,100,10,64,20,2536.70,2000,1280000,788,0.481,126603.29,152487.30,152487.30 2,1000,10,64,20,22019.74,20000,12800000,908,0.554,1090607.10,1234155.65,1234155.65 ``` </details> -- This is an automated message from the Apache Git Service. To respond to the message, please log on to GitHub and use the URL above to go to the specific comment. To unsubscribe, e-mail: [email protected] For queries about this service, please contact Infrastructure at: [email protected]
