github-actions[bot] commented on PR #7473: URL: https://github.com/apache/texera/pull/7473#issuecomment-5232378992
<!-- texera-benchmarks-comment --> ## ⚠️ Benchmark changes need a look 🟢 4 better · 🔴 3 worse · ⚪ 8 noise (<±5%) · 0 without baseline > Compared against main `e30eb17` benchmarked on **this same runner**, so the delta is largely free of cross-runner hardware noise. The "7d avg" column still reflects the gh-pages dashboard. Treat <±5% as noise unless repeated. [Dashboard](https://apache.github.io/texera/dev/bench/) · [Run](https://github.com/apache/texera/actions/runs/31321839776) | | config | throughput | MB/s | latency | max Δ latest / 7d | |---|---|---:|---:|---:|---:| | 🔴 | bs=10 sw=10 sl=64 | 385 | 0.235 | 25,066/32,464/32,464 us | 🔴 +20.7% / 🔴 +98.1% | | 🟢 | bs=100 sw=10 sl=64 | 809 | 0.494 | 123,276/141,593/141,593 us | 🟢 -10.5% / 🔴 +25.9% | | ⚪ | bs=1000 sw=10 sl=64 | 930 | 0.568 | 1,076,453/1,148,127/1,148,127 us | ⚪ within ±5% / 🔴 +6.7% | <details><summary>Baseline details</summary> Latest main `e30eb17` from same runner | config | metric | PR | latest main | 7d avg | Δ latest | Δ 7d | |---|---|---:|---:|---:|---:|---:| | bs=10 sw=10 sl=64 | throughput | 385 tuples/sec | 431 tuples/sec | 743.73 tuples/sec | -10.7% | -48.2% | | bs=10 sw=10 sl=64 | MB/s | 0.235 MB/s | 0.263 MB/s | 0.454 MB/s | -10.6% | -48.2% | | bs=10 sw=10 sl=64 | p50 | 25,066 us | 20,764 us | 13,130 us | +20.7% | +90.9% | | bs=10 sw=10 sl=64 | p95 | 32,464 us | 36,142 us | 16,391 us | -10.2% | +98.1% | | bs=10 sw=10 sl=64 | p99 | 32,464 us | 36,142 us | 19,408 us | -10.2% | +67.3% | | bs=100 sw=10 sl=64 | throughput | 809 tuples/sec | 809 tuples/sec | 944.04 tuples/sec | 0.0% | -14.3% | | bs=100 sw=10 sl=64 | MB/s | 0.494 MB/s | 0.494 MB/s | 0.576 MB/s | 0.0% | -14.3% | | bs=100 sw=10 sl=64 | p50 | 123,276 us | 122,377 us | 105,853 us | +0.7% | +16.5% | | bs=100 sw=10 sl=64 | p95 | 141,593 us | 158,162 us | 112,493 us | -10.5% | +25.9% | | bs=100 sw=10 sl=64 | p99 | 141,593 us | 158,162 us | 122,200 us | -10.5% | +15.9% | | bs=1000 sw=10 sl=64 | throughput | 930 tuples/sec | 922 tuples/sec | 972.22 tuples/sec | +0.9% | -4.3% | | bs=1000 sw=10 sl=64 | MB/s | 0.568 MB/s | 0.563 MB/s | 0.593 MB/s | +0.9% | -4.3% | | bs=1000 sw=10 sl=64 | p50 | 1,076,453 us | 1,087,748 us | 1,033,856 us | -1.0% | +4.1% | | bs=1000 sw=10 sl=64 | p95 | 1,148,127 us | 1,129,578 us | 1,076,083 us | +1.6% | +6.7% | | bs=1000 sw=10 sl=64 | p99 | 1,148,127 us | 1,129,578 us | 1,107,701 us | +1.6% | +3.6% | </details> <details><summary>Raw CSV</summary> ```csv config_idx,batch_size,schema_width,string_len,num_batches,total_ms,total_tuples,total_bytes,tuples_per_sec,mb_per_sec,lat_p50_us,lat_p95_us,lat_p99_us 0,10,10,64,20,518.94,200,128000,385,0.235,25066.42,32464.18,32464.18 1,100,10,64,20,2471.25,2000,1280000,809,0.494,123275.90,141592.60,141592.60 2,1000,10,64,20,21499.80,20000,12800000,930,0.568,1076452.73,1148126.88,1148126.88 ``` </details> -- This is an automated message from the Apache Git Service. To respond to the message, please log on to GitHub and use the URL above to go to the specific comment. To unsubscribe, e-mail: [email protected] For queries about this service, please contact Infrastructure at: [email protected]
