github-actions[bot] commented on PR #7566: URL: https://github.com/apache/texera/pull/7566#issuecomment-5258708432
<!-- texera-benchmarks-comment --> ## ⚠️ Benchmark changes need a look 🟢 0 better · 🔴 7 worse · ⚪ 8 noise (<±5%) · 0 without baseline > Compared against main `e878df3` benchmarked on **this same runner**, so the delta is largely free of cross-runner hardware noise. The "7d avg" column still reflects the gh-pages dashboard. Treat <±5% as noise unless repeated. [Dashboard](https://apache.github.io/texera/dev/bench/) · [Run](https://github.com/apache/texera/actions/runs/31534483317) | | config | throughput | MB/s | latency | max Δ latest / 7d | |---|---|---:|---:|---:|---:| | 🔴 | bs=10 sw=10 sl=64 | 388 | 0.237 | 25,134/37,096/37,096 us | 🔴 +11.9% / 🔴 +132.0% | | 🔴 | bs=100 sw=10 sl=64 | 811 | 0.495 | 121,871/147,990/147,990 us | 🔴 +8.7% / 🔴 +36.9% | | 🔴 | bs=1000 sw=10 sl=64 | 907 | 0.554 | 1,101,588/1,214,692/1,214,692 us | 🔴 +9.5% / 🔴 +17.0% | <details><summary>Baseline details</summary> Latest main `e878df3` from same runner | config | metric | PR | latest main | 7d avg | Δ latest | Δ 7d | |---|---|---:|---:|---:|---:|---:| | bs=10 sw=10 sl=64 | throughput | 388 tuples/sec | 429 tuples/sec | 784.3 tuples/sec | -9.6% | -50.5% | | bs=10 sw=10 sl=64 | MB/s | 0.237 MB/s | 0.262 MB/s | 0.479 MB/s | -9.5% | -50.5% | | bs=10 sw=10 sl=64 | p50 | 25,134 us | 22,464 us | 12,590 us | +11.9% | +99.6% | | bs=10 sw=10 sl=64 | p95 | 37,096 us | 37,578 us | 15,991 us | -1.3% | +132.0% | | bs=10 sw=10 sl=64 | p99 | 37,096 us | 37,578 us | 18,694 us | -1.3% | +98.4% | | bs=100 sw=10 sl=64 | throughput | 811 tuples/sec | 849 tuples/sec | 1,002 tuples/sec | -4.5% | -19.1% | | bs=100 sw=10 sl=64 | MB/s | 0.495 MB/s | 0.518 MB/s | 0.612 MB/s | -4.4% | -19.1% | | bs=100 sw=10 sl=64 | p50 | 121,871 us | 118,429 us | 101,285 us | +2.9% | +20.3% | | bs=100 sw=10 sl=64 | p95 | 147,990 us | 136,197 us | 108,068 us | +8.7% | +36.9% | | bs=100 sw=10 sl=64 | p99 | 147,990 us | 136,197 us | 118,235 us | +8.7% | +25.2% | | bs=1000 sw=10 sl=64 | throughput | 907 tuples/sec | 926 tuples/sec | 1,030 tuples/sec | -2.1% | -11.9% | | bs=1000 sw=10 sl=64 | MB/s | 0.554 MB/s | 0.565 MB/s | 0.629 MB/s | -1.9% | -11.9% | | bs=1000 sw=10 sl=64 | p50 | 1,101,588 us | 1,083,753 us | 991,882 us | +1.6% | +11.1% | | bs=1000 sw=10 sl=64 | p95 | 1,214,692 us | 1,109,229 us | 1,038,496 us | +9.5% | +17.0% | | bs=1000 sw=10 sl=64 | p99 | 1,214,692 us | 1,109,229 us | 1,068,265 us | +9.5% | +13.7% | </details> <details><summary>Raw CSV</summary> ```csv config_idx,batch_size,schema_width,string_len,num_batches,total_ms,total_tuples,total_bytes,tuples_per_sec,mb_per_sec,lat_p50_us,lat_p95_us,lat_p99_us 0,10,10,64,20,514.95,200,128000,388,0.237,25134.04,37095.93,37095.93 1,100,10,64,20,2464.61,2000,1280000,811,0.495,121870.88,147990.33,147990.33 2,1000,10,64,20,22045.36,20000,12800000,907,0.554,1101587.73,1214691.69,1214691.69 ``` </details> -- This is an automated message from the Apache Git Service. To respond to the message, please log on to GitHub and use the URL above to go to the specific comment. To unsubscribe, e-mail: [email protected] For queries about this service, please contact Infrastructure at: [email protected]
