github-actions[bot] commented on PR #7712: URL: https://github.com/apache/texera/pull/7712#issuecomment-5312648463
<!-- texera-benchmarks-comment --> ## ⚠️ Benchmark changes need a look 🟢 2 better · 🔴 6 worse · ⚪ 7 noise (<±5%) · 0 without baseline > Compared against main `1c4662b` benchmarked on **this same runner**, so the delta is largely free of cross-runner hardware noise. The "7d avg" column still reflects the gh-pages dashboard. Treat <±5% as noise unless repeated. [Dashboard](https://apache.github.io/texera/dev/bench/) · [Run](https://github.com/apache/texera/actions/runs/32001608920) | | config | throughput | MB/s | latency | max Δ latest / 7d | |---|---|---:|---:|---:|---:| | 🔴 | bs=10 sw=10 sl=64 | 379 | 0.231 | 25,658/31,488/31,488 us | 🔴 +9.2% / 🔴 +103.2% | | 🔴 | bs=100 sw=10 sl=64 | 799 | 0.488 | 122,064/177,490/177,490 us | 🔴 +36.3% / 🔴 +68.1% | | ⚪ | bs=1000 sw=10 sl=64 | 993 | 0.606 | 1,012,737/1,087,122/1,087,122 us | ⚪ within ±5% / 🔴 +7.4% | <details><summary>Baseline details</summary> Latest main `1c4662b` from same runner | config | metric | PR | latest main | 7d avg | Δ latest | Δ 7d | |---|---|---:|---:|---:|---:|---:| | bs=10 sw=10 sl=64 | throughput | 379 tuples/sec | 398 tuples/sec | 784.16 tuples/sec | -4.8% | -51.7% | | bs=10 sw=10 sl=64 | MB/s | 0.231 MB/s | 0.243 MB/s | 0.479 MB/s | -4.9% | -51.7% | | bs=10 sw=10 sl=64 | p50 | 25,658 us | 23,487 us | 12,626 us | +9.2% | +103.2% | | bs=10 sw=10 sl=64 | p95 | 31,488 us | 34,454 us | 16,169 us | -8.6% | +94.7% | | bs=10 sw=10 sl=64 | p99 | 31,488 us | 34,454 us | 18,986 us | -8.6% | +65.8% | | bs=100 sw=10 sl=64 | throughput | 799 tuples/sec | 890 tuples/sec | 1,023 tuples/sec | -10.2% | -21.9% | | bs=100 sw=10 sl=64 | MB/s | 0.488 MB/s | 0.543 MB/s | 0.625 MB/s | -10.1% | -21.9% | | bs=100 sw=10 sl=64 | p50 | 122,064 us | 110,925 us | 99,185 us | +10.0% | +23.1% | | bs=100 sw=10 sl=64 | p95 | 177,490 us | 130,261 us | 105,616 us | +36.3% | +68.1% | | bs=100 sw=10 sl=64 | p99 | 177,490 us | 130,261 us | 113,681 us | +36.3% | +56.1% | | bs=1000 sw=10 sl=64 | throughput | 993 tuples/sec | 1,020 tuples/sec | 1,057 tuples/sec | -2.6% | -6.0% | | bs=1000 sw=10 sl=64 | MB/s | 0.606 MB/s | 0.623 MB/s | 0.645 MB/s | -2.7% | -6.0% | | bs=1000 sw=10 sl=64 | p50 | 1,012,737 us | 976,278 us | 965,435 us | +3.7% | +4.9% | | bs=1000 sw=10 sl=64 | p95 | 1,087,122 us | 1,110,122 us | 1,012,135 us | -2.1% | +7.4% | | bs=1000 sw=10 sl=64 | p99 | 1,087,122 us | 1,110,122 us | 1,042,088 us | -2.1% | +4.3% | </details> <details><summary>Raw CSV</summary> ```csv config_idx,batch_size,schema_width,string_len,num_batches,total_ms,total_tuples,total_bytes,tuples_per_sec,mb_per_sec,lat_p50_us,lat_p95_us,lat_p99_us 0,10,10,64,20,527.44,200,128000,379,0.231,25658.12,31488.35,31488.35 1,100,10,64,20,2503.42,2000,1280000,799,0.488,122064.26,177489.51,177489.51 2,1000,10,64,20,20141.28,20000,12800000,993,0.606,1012736.54,1087121.59,1087121.59 ``` </details> -- This is an automated message from the Apache Git Service. To respond to the message, please log on to GitHub and use the URL above to go to the specific comment. To unsubscribe, e-mail: [email protected] For queries about this service, please contact Infrastructure at: [email protected]
