github-actions[bot] commented on PR #7767: URL: https://github.com/apache/texera/pull/7767#issuecomment-5335996986
<!-- texera-benchmarks-comment --> ## ⚠️ Benchmark changes need a look 🟢 4 better · 🔴 1 worse · ⚪ 10 noise (<±5%) · 0 without baseline > Compared against main `fb9f4e2` benchmarked on **this same runner**, so the delta is largely free of cross-runner hardware noise. The "7d avg" column still reflects the gh-pages dashboard. Treat <±5% as noise unless repeated. [Dashboard](https://apache.github.io/texera/dev/bench/) · [Run](https://github.com/apache/texera/actions/runs/32201210474) | | config | throughput | MB/s | latency | max Δ latest / 7d | |---|---|---:|---:|---:|---:| | 🔴 | bs=10 sw=10 sl=64 | 411 | 0.251 | 23,557/30,651/30,651 us | 🟢 -28.8% / 🔴 +89.0% | | 🟢 | bs=100 sw=10 sl=64 | 798 | 0.487 | 124,622/146,738/146,738 us | 🟢 -8.6% / 🔴 +32.2% | | ⚪ | bs=1000 sw=10 sl=64 | 901 | 0.55 | 1,107,737/1,191,695/1,191,695 us | ⚪ within ±5% / 🔴 +12.9% | <details><summary>Baseline details</summary> Latest main `fb9f4e2` from same runner | config | metric | PR | latest main | 7d avg | Δ latest | Δ 7d | |---|---|---:|---:|---:|---:|---:| | bs=10 sw=10 sl=64 | throughput | 411 tuples/sec | 408 tuples/sec | 743.3 tuples/sec | +0.7% | -44.7% | | bs=10 sw=10 sl=64 | MB/s | 0.251 MB/s | 0.249 MB/s | 0.454 MB/s | +0.8% | -44.7% | | bs=10 sw=10 sl=64 | p50 | 23,557 us | 19,869 us | 13,204 us | +18.6% | +78.4% | | bs=10 sw=10 sl=64 | p95 | 30,651 us | 43,024 us | 16,220 us | -28.8% | +89.0% | | bs=10 sw=10 sl=64 | p99 | 30,651 us | 43,024 us | 19,867 us | -28.8% | +54.3% | | bs=100 sw=10 sl=64 | throughput | 798 tuples/sec | 779 tuples/sec | 959.52 tuples/sec | +2.4% | -16.8% | | bs=100 sw=10 sl=64 | MB/s | 0.487 MB/s | 0.476 MB/s | 0.586 MB/s | +2.3% | -16.8% | | bs=100 sw=10 sl=64 | p50 | 124,622 us | 126,614 us | 103,974 us | -1.6% | +19.9% | | bs=100 sw=10 sl=64 | p95 | 146,738 us | 160,524 us | 111,036 us | -8.6% | +32.2% | | bs=100 sw=10 sl=64 | p99 | 146,738 us | 160,524 us | 118,982 us | -8.6% | +23.3% | | bs=1000 sw=10 sl=64 | throughput | 901 tuples/sec | 924 tuples/sec | 994.68 tuples/sec | -2.5% | -9.4% | | bs=1000 sw=10 sl=64 | MB/s | 0.55 MB/s | 0.564 MB/s | 0.607 MB/s | -2.5% | -9.4% | | bs=1000 sw=10 sl=64 | p50 | 1,107,737 us | 1,081,808 us | 1,011,206 us | +2.4% | +9.5% | | bs=1000 sw=10 sl=64 | p95 | 1,191,695 us | 1,137,640 us | 1,055,603 us | +4.8% | +12.9% | | bs=1000 sw=10 sl=64 | p99 | 1,191,695 us | 1,137,640 us | 1,084,808 us | +4.8% | +9.9% | </details> <details><summary>Raw CSV</summary> ```csv config_idx,batch_size,schema_width,string_len,num_batches,total_ms,total_tuples,total_bytes,tuples_per_sec,mb_per_sec,lat_p50_us,lat_p95_us,lat_p99_us 0,10,10,64,20,486.44,200,128000,411,0.251,23556.96,30650.72,30650.72 1,100,10,64,20,2507.64,2000,1280000,798,0.487,124621.69,146737.89,146737.89 2,1000,10,64,20,22196.01,20000,12800000,901,0.550,1107736.63,1191694.96,1191694.96 ``` </details> -- This is an automated message from the Apache Git Service. To respond to the message, please log on to GitHub and use the URL above to go to the specific comment. To unsubscribe, e-mail: [email protected] For queries about this service, please contact Infrastructure at: [email protected]
