github-actions[bot] commented on PR #7895: URL: https://github.com/apache/texera/pull/7895#issuecomment-5389532714
<!-- texera-benchmarks-comment --> ## ⚠️ Benchmark changes need a look 🟢 2 better · 🔴 2 worse · ⚪ 11 noise (<±5%) · 0 without baseline > Compared against main `2113455` benchmarked on **this same runner**, so the delta is largely free of cross-runner hardware noise. The "7d avg" column still reflects the gh-pages dashboard. Treat <±5% as noise unless repeated. [Dashboard](https://apache.github.io/texera/dev/bench/) · [Run](https://github.com/apache/texera/actions/runs/32678057631) | | config | throughput | MB/s | latency | max Δ latest / 7d | |---|---|---:|---:|---:|---:| | 🔴 | bs=10 sw=10 sl=64 | 401 | 0.245 | 24,005/33,341/33,341 us | 🟢 -7.0% / 🔴 +132.6% | | ⚪ | bs=100 sw=10 sl=64 | 795 | 0.485 | 120,280/172,571/172,571 us | ⚪ within ±5% / 🔴 +73.5% | | ⚪ | bs=1000 sw=10 sl=64 | 922 | 0.563 | 1,084,789/1,168,685/1,168,685 us | ⚪ within ±5% / 🔴 +21.9% | <details><summary>Baseline details</summary> Latest main `2113455` from same runner | config | metric | PR | latest main | 7d avg | Δ latest | Δ 7d | |---|---|---:|---:|---:|---:|---:| | bs=10 sw=10 sl=64 | throughput | 401 tuples/sec | 423 tuples/sec | 833.1 tuples/sec | -5.2% | -51.9% | | bs=10 sw=10 sl=64 | MB/s | 0.245 MB/s | 0.258 MB/s | 0.508 MB/s | -5.0% | -51.8% | | bs=10 sw=10 sl=64 | p50 | 24,005 us | 23,390 us | 11,860 us | +2.6% | +102.4% | | bs=10 sw=10 sl=64 | p95 | 33,341 us | 35,862 us | 14,334 us | -7.0% | +132.6% | | bs=10 sw=10 sl=64 | p99 | 33,341 us | 35,862 us | 18,194 us | -7.0% | +83.3% | | bs=100 sw=10 sl=64 | throughput | 795 tuples/sec | 824 tuples/sec | 1,085 tuples/sec | -3.5% | -26.7% | | bs=100 sw=10 sl=64 | MB/s | 0.485 MB/s | 0.503 MB/s | 0.662 MB/s | -3.6% | -26.8% | | bs=100 sw=10 sl=64 | p50 | 120,280 us | 116,750 us | 92,973 us | +3.0% | +29.4% | | bs=100 sw=10 sl=64 | p95 | 172,571 us | 178,817 us | 99,460 us | -3.5% | +73.5% | | bs=100 sw=10 sl=64 | p99 | 172,571 us | 178,817 us | 107,737 us | -3.5% | +60.2% | | bs=1000 sw=10 sl=64 | throughput | 922 tuples/sec | 927 tuples/sec | 1,111 tuples/sec | -0.5% | -17.0% | | bs=1000 sw=10 sl=64 | MB/s | 0.563 MB/s | 0.566 MB/s | 0.678 MB/s | -0.5% | -17.0% | | bs=1000 sw=10 sl=64 | p50 | 1,084,789 us | 1,075,530 us | 915,816 us | +0.9% | +18.5% | | bs=1000 sw=10 sl=64 | p95 | 1,168,685 us | 1,119,376 us | 959,066 us | +4.4% | +21.9% | | bs=1000 sw=10 sl=64 | p99 | 1,168,685 us | 1,119,376 us | 993,644 us | +4.4% | +17.6% | </details> <details><summary>Raw CSV</summary> ```csv config_idx,batch_size,schema_width,string_len,num_batches,total_ms,total_tuples,total_bytes,tuples_per_sec,mb_per_sec,lat_p50_us,lat_p95_us,lat_p99_us 0,10,10,64,20,498.94,200,128000,401,0.245,24005.39,33341.35,33341.35 1,100,10,64,20,2515.19,2000,1280000,795,0.485,120280.01,172571.24,172571.24 2,1000,10,64,20,21698.22,20000,12800000,922,0.563,1084789.25,1168685.03,1168685.03 ``` </details> -- This is an automated message from the Apache Git Service. To respond to the message, please log on to GitHub and use the URL above to go to the specific comment. To unsubscribe, e-mail: [email protected] For queries about this service, please contact Infrastructure at: [email protected]
